I ran spec slash at The Factory once a month ago on carpet and I rented a Slash to run in the box stock Slash class. I was told I could make changes but I couldn’t change the gearing so I laid down the shocks and put some 50wt oil in the front and called it a day. I TQ’d and won the A main. It didn’t need higher gearing. I was getting wheelspin from the stock tires coming out of the sweeper onto the front straightaway.
@speedytraxxas360
8 ай бұрын
Love all of these series you’re doing, I remember when the slash first released and I’d race it in the slash class when short course racing was first coming alive. A few years later as a fun project I bought the ChuckWorksRC mid motor conversion kit for 2wd slash and raced it until I got a W. Cool to see!
@D_L_Equipment_Service
8 ай бұрын
Love the series you do, would love to see a rustler up next for a stadium truck class if there is one where you race!
@5.02valve8
7 ай бұрын
Ur suspension tuning setup is ideal for smooth tracks my slash likes it soft with maximum travel on a rough bumpy track i run pro line power strokes all around second hole from inside on the rear first hole up front
@myharryface
8 ай бұрын
Awesome! Loved the video. Great detail. -- I look forward to your next racing video!!
@grandmackdady
8 ай бұрын
i know i will not be up that way till next winter but can't wait to run my slash 2wd at big dog and i hope to have a couple more rc's by then. just starting my collection again and have had traxxas a bandit and rustler back in 95 so i know how good they can be when set up right for you when racing them. just glad they have a all metal gear transmission now days because you would strip a idler gear almost every week with them back then while racing them.
@linhof4
8 ай бұрын
Thanks for sharing. Looks like a great setup!
@bluegroovemodelsports9650
8 ай бұрын
Great video. Cool build. Fast little truck
@darioperez9127
8 ай бұрын
great video way to make the slash competitive keep up the great info
@michaeldorich4485
8 ай бұрын
Great information! Thanks.
@fedthegoon
8 ай бұрын
This is sick💯 I use to race full spec tekno 1/10 scale buggy’s and I prefer watching the trucks turned into race builds a lot cooler to watch in my opinion
@mxacres
7 ай бұрын
Thank you
@tyleruhlenberg8074
8 ай бұрын
dude this truck is so illegal 😂. i bet it drives great
@user-nd8jn8qg5u
4 ай бұрын
Good luck with your amazing projects!
@mxacres
4 ай бұрын
Thank you!
@user-lv2kd6od6d
8 ай бұрын
Outstanding 😎🍻🍻🍻
@johnromo987
8 ай бұрын
Nice work brother, Traxxas could learn from you 😀
@mxacres
8 ай бұрын
Thanks 👍
@paulpadilla5288
8 ай бұрын
Always wondered what your setup was....now I'm gonna copy some of it.......check out the new clipless body mounts......pretty cool......😎👍
@shawnwarner2609
8 ай бұрын
Where did you source the clipless body mounts...? Would you attach a link please...?
@paulpadilla5288
8 ай бұрын
Tra6929....should be in your hobby shop.....they are awesome😎👍
@vesaulvila8567
8 ай бұрын
I would really like to see the mounting of the front sway bar a bit better
@user-gr2gc2qo2c
8 ай бұрын
Nice ride
@JonnyJetson754
8 ай бұрын
Great video thanks dude 💯🥸
@mxacres
8 ай бұрын
You bet
@Pablo668
8 ай бұрын
That's a well sorted rig. Very nice. Is it odd that I'm taking my Slash in the opposite direction?
@CplVeers
8 ай бұрын
looking at the half gallon of Beast in that fridge lol
@mxacres
8 ай бұрын
Nothing to see here
@gregorholmes1837
8 ай бұрын
Stupid winter. Stuck inside. Wife even took my belt n shoe laces. But at least these are entertaining
@mxacres
8 ай бұрын
😂😂😂
@tattoomike84
7 ай бұрын
Kool
@alexhoover3335
6 ай бұрын
Are you running the staggered 2wd wheel setup? The poke outside the body makes me think otherwise.. I dig it
@aguyinnc2865
8 ай бұрын
Now how about the Bandito set up? Which wheels and tires are you using? Thanks!
@mxacres
8 ай бұрын
Wheels are ae and tires are aka ultra soft slicks.
@aguyinnc2865
8 ай бұрын
@@mxacres did you have to change the front spindle axles to make the ae wheels work?
@Barbariandisks
8 ай бұрын
Natural light, seriously! That's like drinking bud light... But still cool slash
@mxacres
8 ай бұрын
Natural light is ALL natural. It says it right on the can! Wife approved.
@berndtslawncare4906
6 ай бұрын
I was wondering if you could tell me what your homemade tire sauce recipe is
@freddyubiera4304
8 ай бұрын
Hey I've seen thos wheels in several videos. What are they? Sorry if I missed this in prior content.
@mxacres
8 ай бұрын
Not sure on the wheels. I got the used with proline tires
@nickdr169
2 ай бұрын
Looks like de racing wheels, available in white, black, silver, different specs for different shortcourse trucks.
@vivos71
6 ай бұрын
I may be wrong, but didn’t the old VXL esc have a port for sensored motors?
@jasonrhodes9726
7 ай бұрын
Drinking the ole' Financial Light?
@mxacres
7 ай бұрын
😂
@gateguardninja
8 ай бұрын
On the shocks, what piston/ wt are you running and are you running limiters?
@mxacres
8 ай бұрын
Stock proline pistons and no limiters.
@benkanbike1141
8 ай бұрын
What are the shocks that you reccomend for this setup?
@mxacres
8 ай бұрын
Pro lines have worked the best with ae springs.
@nettceo8543
8 ай бұрын
I may have missed it but what is your shock oil weight?
@mxacres
8 ай бұрын
Crap I forgot. I’ll get back to you. I wrote it down somewhere.
@simonj126
8 ай бұрын
Battery permanently mounted? Many clubs require LiPo charging in a bag/container.... obviously no such rule at your track?
@mxacres
8 ай бұрын
Taped in.
@endosrc
8 ай бұрын
will the shock towers be aluminum or carbon eventually?
@mxacres
8 ай бұрын
Possibly carbon. Stay tuned.
@mitch858
7 ай бұрын
can you trace the reat tower so I could replicate yours and have a good starting point?
@veightrwd8828
5 ай бұрын
What servo are you running again? What kg is it?
@kolescapes2566
4 ай бұрын
What weight shock oil do you run?
@mxacres
4 ай бұрын
I remember for sure since that was awhile ago, but probably had around 32.5 ish
@fa509si7
7 ай бұрын
Would you have a setup for a loose dirt track?
@r.r.hughes9808
7 ай бұрын
In other words you will never be able to copy my setup because of all the proprietary homemade parts I'm not giving you the plans for 🙂. But have fun trying!
Пікірлер: 63