I just did this 2 days ago! I did it in the garage so I could suspend the bars up from the ceiling while I worked.
@ratbrain7743
6 ай бұрын
I just did this on my gtx. Cables look kinda tight. I'm 6'3". I tried it in the rear position first and it was ok. After I rode a few times. I moved it back to stock forward. It's almost perfect for me there. I can lean back on my Utopia backrest and go
@JessieGyrl7
6 ай бұрын
The towel was a good idea when I installed mine 😂 definitely came in handy. And thanks for the torque requirements I tried looking for them and couldn’t find them
@ADV-Rider-Dude
6 ай бұрын
Glad I could help!
@bearvonsteuben9675
Жыл бұрын
Alan! Perfect timing! I just today received my 40mm risers from Voight. I have not installed them yet, but they seem to be very well-made and the packaging was superb. Thanks for your insights as always, and thanks for producing this video. Cheers!
@MotoPapa88
Жыл бұрын
Great video, Alan! Thanks for putting it together. Judging by your video, where you placed the bars is perfect relative to your size and your seating position. Cheers!
@johnbragg2690
Жыл бұрын
Thanks for another informative video!!
@andrewshore262
Жыл бұрын
Mine arrive tomorrow (apparently) from the same manufacturer. Some of the retaining bolts on the clamp seemed very loose 🤔, probably just as well everything got retorqued!
@hildichannel9739
7 ай бұрын
👍
@emmezero
19 күн бұрын
Salve Alan, ho acquistato gli stessi riser 20mm WM che vorrei montare sulla mia GT pro. Come cambia la posizione in sella ? E' piu' confortevole per braccia e schiena nei viaggi piu' lunghi ?Grazie
@ADV-Rider-Dude
18 күн бұрын
Hi - I have definitely found that the riding position is much more comfortable with the bar riser. I also moved the bar to the position nearer to me.
@emmezero
18 күн бұрын
@@ADV-Rider-Dude Grazie
@sergey-rt3mk
Жыл бұрын
Hello, thanks for the video. Did I understand correctly with the dynamic key at 36Nm and 26Nm? Thanks.
@hc0109207
Жыл бұрын
Great video Alan! Just out of curiosity, do you reckon a ~40mm risers would work with the stock cables? I'm quite a bit taller so looking to add a bit more height for standing, but can't find any good resources online that say for sure.
@ADV-Rider-Dude
Жыл бұрын
Hi Houston. To me it looks like it should be fine. If you look through the comments you will see that Bear also ordered the 40mm risers so he should be able to confirm. Just also remember that once you install even the 20mm risers you can also bring the bars forward on the Explorer models. On the pro models you don't need risers at all in order to bring the bars forward. You can also tilt the bars upward which will give more height and also give you a better position for the clutch and brake levers while standing. I'm probably going to move my bars forward and tilt them up soon as I was not enjoying the clutch an brake lever positions the last time I was out riding off-road. Before I put the bar risers on I had the bars tilted upwards but I put them back down again after installing the risers.
@vsmamik1977
Жыл бұрын
I just had the 40 mm risers from Voigt installed on my '22 Rally Explorer. They work with the stock cables and don't block the screen. I'm 6 ft 3 in and they provide me with the perfect seating and standing position.
@lordrider9370
9 ай бұрын
So, you dont have any problem with stock cables? I had 20mm raiser but havent installed yet. It looks i will have cable problem becouse it seems there is not enough cable for raiser. Did you pull to cables? Or the stock cables were enough for it?
@vsmamik1977
9 ай бұрын
No issues. Used stock cables.
@shegocrazy
Жыл бұрын
Didn't use threadlocker?
@ADV-Rider-Dude
Жыл бұрын
Nope. I didn't see any on when I removed the bolts, and there were no instructions to do so in the service manual that I saw. Please let me know if you have seenanything different.
@shegocrazy
Жыл бұрын
@@ADV-Rider-Dude The instructions for the Motech risers say to use threadlocker so I went with that.
Пікірлер: 23