I'm glad you included the horrible sound the Z steppers make when they are blocked. It would frighten a newbie if they weren't prepared for it.
@mateuslima300
Жыл бұрын
thanks bro, your video is the best than I can find about this calibration!
@kimber1958
3 жыл бұрын
pretty handy bunch of settings you have there.Thank you very much for sharing it very interesting
@juniorshbr13
3 жыл бұрын
I needed that. Amazing Thanks
@G3PWP
Жыл бұрын
I use plastic plumbing tube for z axis calibrate stoppers ! just cut a slot in the tube if you have any tube too hand ! 15mm pipe
@tahubulatgurihz
Жыл бұрын
black sensor work with all kind bed surface (metal, glass)
@Marcometaner
Жыл бұрын
Will this not damage the motors?
@kolbroshop884
Жыл бұрын
Nope
@mechanicus8521
3 жыл бұрын
Nice video!!
@ninolongobardi5484
8 ай бұрын
Hello I bought myself a TronXY X5SA-400 printer and am having trouble leveling it and getting a print to work from the Cura program from the usb.
@kolbroshop884
8 ай бұрын
I printed plastic distances. And i always manually push the table in upper limit, just like in the video. It works always
@ninolongobardi5484
8 ай бұрын
@@kolbroshop884 hello i printed those stops from thingyverse and found i cant get the bed closer to the nozzle while these are in place. my previous printer is a tronxy xy2 pro and that works perfectly. i bought myself this x5sa-400 and spent the time building it. I managed to get the values close to 0 but my problem im having now is trying to get a print in cura to start in the middle of the printer and not to the front left corner where is seems to be just going back and forth. You got any videos that show what you use to splice
@kolbroshop884
8 ай бұрын
@@ninolongobardi5484 sorry but i didnt have this kind of problem, mine prints on the position where i locate it in cura, this looks like a software problem to me.
@justinhendrick6256
6 ай бұрын
M107 G92 E0 M190 S65 ; set bed temperature and wait for it to be reached M104 S190 ; set temperature G28 ; home all axes G1 Z5 F5000 ; lift nozzle ; Filament gcode M109 S190 ; set temperature and wait for it to be reached G21 ; set units to millimeters G90 ; use absolute coordinates M82 ; use absolute distances for extrusion G92 E0 G1 Z0.400 F12000.000 G1 E-2.00000 F2400.00000 G92 E0
@justinhendrick6256
6 ай бұрын
This is my G-Code to get my x5sa to run with cura it starts slow but it works
Пікірлер: 17