Great work, some people make an awful mess of wiring accessories.
@RodRidesWrenches
Жыл бұрын
Good news is it worked out in the end!
@apugali
2 жыл бұрын
I work at a dealer in Tennessee.We charge $30 each mount and balance wheels off of bike.On bike is $84 rear,$75 front.
@aidandoyle7982
3 жыл бұрын
I enjoyed the Metzler review, I had them on a bmw K1200 very grippy tyre, as soon as I wear out my Pirelli gt2's which were on my st1300 when I purchased it, I'll definitely be getting the metzler again, a very confidence inspiring tyre in my opinion.
@RodRidesWrenches
3 жыл бұрын
Hey Thanks, I've taken some criticism for the length of time I spent on this segment but buying the Metzeler can be confusing with the different specs. This was the point of the segment, to shed light on the variations. Thanks again for Liking & Subscribing!
@pentachronic
13 күн бұрын
I had them on 2 of my previous bikes and on my ST1300. Have Michelins at the mo’ because Metzelers weren’t available but will try and get Metz’s next go around as they are wonderful tires.
@Forward_Unto_Dawn
3 жыл бұрын
I bought my very first ST1300PA in early July and have been scouring the web looking for all kinds of things and advice. I must say, your videos are extremely professional and helpful. I'm somewhat of a new motorcycle rider in itself, having only been riding since 2017. I belong to a volunteer EMS group on motorcycles in NJ and am looking to do some upgrades on mine. I will definitely keep looking out for your videos in the future and hope to gain some knowledge on the 1300. I especially loved the video on reducing the heat. I hope to do that one of these days. Keep up the great work! I live in an apartment building so I don't have a garage like yours to work on it in privacy. I wish I could bring my bike to you so we can work on it together lol
@RodRidesWrenches
3 жыл бұрын
Just email me if you have any questions; rodrideswrenches@gmail.com Thanks for liking & Subscribing!
@jeffdean7623
Жыл бұрын
I just replaced the ignition switch on my 2012 ST, it took six months before I finally found one
@RodRidesWrenches
Жыл бұрын
Thanks New Video is out today! kzitem.info/news/bejne/u5ilvZt9b4RqfWU
@Babybugex
2 жыл бұрын
Break lights..One running light in the back is great. Can't have nuff break lights.
@RodRidesWrenches
2 жыл бұрын
Thanks for the feedback! New video out Sunday!
@lesgraham2578
10 ай бұрын
Great video! Curious, when had the rear wheel removed what did you use for the final drive moly paste? Honda 60 is no longer available, saw another video of a guy making his own with powder and grease.
@RodRidesWrenches
10 ай бұрын
Any molybdenum grease will do. Honda didn't make their own grease, they use a molybdenum. This is something a lot of riders overthink, the splines are contained and what you are greasing against is pressure and not rotational forces like in a wheel bearing. If you want to be particular, buy some expensive spline lube from your BMW Motorrad parts guy. If you want to be thrifty, remember lithium grease is for rotational bearings like axles, spindles and even steering heads, molybdenum grease is for pressure and waterproofing in areas like swingarm and suspension or drive splines.
@lesgraham2578
10 ай бұрын
@@RodRidesWrenches Right on! Thanks.
@richfjr1300
3 жыл бұрын
i'd say wire it for brake lights only as that what i did :)
@RodRidesWrenches
3 жыл бұрын
Thanks for commenting!
@TheBasementChannel
2 жыл бұрын
Great vid, thanks for creating.
@RodRidesWrenches
2 жыл бұрын
Thanks for liking & subscribing!
@peterc2248
3 жыл бұрын
Sorry but the extended ad for Metzler put me right off. Shame as the vid looked interesting
@RodRidesWrenches
3 жыл бұрын
Definitely someone's loss yours and mine... Hope you'll circle back for future or past vids.
@thebear6529
2 жыл бұрын
hey great video,
@RodRidesWrenches
2 жыл бұрын
Thanks!😀 Check out the newer stuff it's even better!
@thomasgilvarry8179
2 жыл бұрын
Hi , great vids! I'm thinking about the weight and is it too much really. Whats your opinion? Thanks , Tom.
@RodRidesWrenches
2 жыл бұрын
Hi Tom - First check out kzitem.info/news/bejne/tWOaqmmdn5pmaYY I would say the bike's weight is noticeable when you are just moving it around and not riding. There are other, lighter bikes. When riding there is no weight difference. Thanks for questions & watching the videos! I hope you'll be a subscriber!
@billbonu1639
Жыл бұрын
I gave up half way through the Metzler tire commercial.
@Tiesemans_one_in_ten
2 жыл бұрын
LOL Metzler underneath a Honda ST!? NO thank you sir ... Bridgestone ST30/31/32 every time .. :) But then again I understand this is an informercial lol ...
@Jodyrides
3 жыл бұрын
I thought this was a report on the Honda ST, it turned into a commercial for Metzler tires which I do not like. They cost more than they should and they don’t last as long as they should. I personally prefer Dunlops, Avon’s, even Perelli’s to Metzler‘s. Metzler’s cost about 30% more than the other tires, and they don’t last as long as the other tires. I don’t notice Dunlops or a Vons or Perelli’s losing traction, or drifting, or wearing out fast.. Are usually don’t care if someone mentions a product during their video, but I quit watching this video after a few minutes because it seem to be just a commercial for Metzler’s. I never got to the end
@ipdjbt
3 жыл бұрын
lol, triggered child.
@RodRidesWrenches
2 жыл бұрын
Thanks for Liking & Subscribing, New Video this Friday!
@sergioalves1639
5 ай бұрын
Boa tarde acabei de comprar uma igual mas tenho um problema se me puder ajudar agradeço a minha moto a frio nao aguenta o relantim ja lhe aconteceu
@perryeaton123
Жыл бұрын
Stay stock… No running lights… as you say it’s not a GL😅
@firstcomment2801
Ай бұрын
Not satisfied with the wind beating me on ST1300. otherwise a nice bike.
@kiwi-on-a-bike660
3 жыл бұрын
Why not wire it for both?
@RodRidesWrenches
2 жыл бұрын
Thanks so much for liking & subscribing, new video out Friday!
@TheMasonjarz
Жыл бұрын
Hi Rod. Did you ever experience the dreaded “Pan Wobble”? Any thoughts on it? Thanks
@RodRidesWrenches
Жыл бұрын
Remember you Asked! Nope, Never had three ST1300's, regularly ride quickly over mountain roads with passengers and even gear. There are a lot of excuses why this happens, worn or loose steering head bearings, forks low on oil from leaking, a Givi or other non Honda tour pack... I will put my money behind improper weight load and improper suspension preload/rebound. Let's face it, most ST1300 riders are older and us older guys deserve a nice comfy ride so we soften the preload and ignore the rebound dampening on the rear shock. Then we decide to head up a fast road we're unfamiliar with, add a passenger for their annual ride or load as much camping gear on the bike we can and still have room for the rider to sit. If you don't adjust your suspension to match your aspirations/weight/speed you are in for some hurt. When was the last time a rider who had this problem claims to have checked their suspension sag? I put more faith in Honda engineers than most rider's discipline... Thanks for the question & being a subscriber!
@TheMasonjarz
Жыл бұрын
@@RodRidesWrenches thank you very much. I really value your opinion. I’m an avid RRW watcher and appreciate your input. As with many problems, I think the internet fans the flames and blows things out of proportion. The fact that the Police versions were scrutinized in the UK and France made me think the problem could be worse than it is. Thanks again!
@RodRidesWrenches
Жыл бұрын
@@TheMasonjarz No problem, I appreciate your viewership! I was once pulled over riding my 08' ST1300 by some RCMP on Harley's. They thanked me for stopping because they knew they were not going to catch me if I wanted to throttle down. We talked about bikes and they coveted the size and speed at which the ST1300 travelled, I even let them sit on it, helped with the ticket! Every take a close look at a Police Bike? Extra battery, a radio built for a car or boat, weird pannier modifications. This is part of the reason ElectraGlides are the mainstay in North America, they cannot go that fast and already have aerodynamic issues with that batwing! BTW I have a 4 video extravaganza coming this Boxing Week so thanks for watching👍
@TheMasonjarz
Жыл бұрын
Thank you! Can’t wait to binge RRW! Hope the Goldwing is part of the Rodapalooza!
@jankowalski9123
2 жыл бұрын
Wszystko fajnie 👍😉
@RodRidesWrenches
2 жыл бұрын
Thanks for Liking & Subscribing! New Video Coming Friday Sept 17th...
@malcolmmcrae7040
2 жыл бұрын
Informative video's , I've just got back into motorcycling after a hiatus of about 22 years mainly because of the high cost of fuel , I purchased a 2006 honda st1300p ex cop bike it has about 123,000 kms on it , it seems ok , probably the only thing of concern to me would be the drive shaft ,it seems to have a bit of play like when you roll off the throttle and back on it seems a bit jerky , is there a way to check for any problems with the drive shaft
@RodRidesWrenches
2 жыл бұрын
Hi Malcolm & Welcome to the Channel! Put the bike on the center stand and rotate the rear wheel with your bike in 1st gear. There should be a little bit of movement rotating back and forth but not excessive and not a lot of noise (subjective but more of a thud not a clang). There is one universal joint on this driveshaft at the transmission OP side. There is really no way to check it without removal which means the swingarm comes off. It could also be final drive lash in the gears you would need to take apart the pinion & ring gear and check the teeth as well as the contact pattern. Better to find a good used one and just replace. Finally and hopefully as the least expensive & time consuming, there are rubber dampeners built into the rear wheel hub. These dampeners are designed to take the shock load and wear out over time. Being a previous service vehicle I would expect there to have been hard acceleration and braking regularly on the bike. These rubber dampeners are designed to wear before the shock is transmitted to the other components I mentioned. The rubber also cracks and falls apart with age. Invest in a Honda (not an aftermarket) shop manual. This bike is a bit more complex than a standard inline four & good luck, let us know what you find!
@The_Touring_Jedi
4 ай бұрын
@@RodRidesWrenchesIn 99% of the symptoms described is usually rubber damper in wheel.Damaged shaft in Honda is almost impossible as to reach that point the bike could not be driven at all if rubber damper gets turned to dust.
@buckreynolds1779
2 жыл бұрын
Your talented
@buckreynolds1779
2 жыл бұрын
I would keep the top box lights for braking only
@RodRidesWrenches
2 жыл бұрын
Thanks for your feedback, liking & subscribing!
@AHoundOnAHonda
2 жыл бұрын
My talented what?
@SatansSpatula
3 жыл бұрын
You say that you don't want your brake light circuit shorting out on a trip, but I fail to see how your new system has prevented that possibility. You're still tapped into the brake light circuit, and I don't see any lower-amp inline fuse to protect the parent circuit.
@RodRidesWrenches
3 жыл бұрын
Valid point but by shortening the wires, not exposing them to the underside of the fender I felt it was safer than the previous arrangement. Now the tour pack wiring is no longer running down the fender just up from the tail lights.
@SilvaAdventures
2 жыл бұрын
Gee, a Metzler ad fronting as an ST1300 video.
@deniseclark2639
3 жыл бұрын
ERRR ITS NOT A DIFF ITS A FINAL DRIVE
@RodRidesWrenches
3 жыл бұрын
You're absolutely correct it is a final drive since there isn't another wheel being driven. Crown, Pinion Gear, Drive Shaft, hard to break terminology habits when the internal components have so many similarities.. Thanks
@staylofordo7111
Жыл бұрын
Haha! I see that little word used a lot for final drive! It’s ok, that inside tire can roll whatever speed it likes! 😂. I really like this bike ! Thanks !!
@firestorm755
2 жыл бұрын
I've never seen handlebars so.. Ugly! Sorry but wow they really are and the brake line extenders!! Never seen that done before. I know you've changed them for obvious reasons now😂
Пікірлер: 57