a youtuber contacted me on some machines he no longer needed as he was moving and asked if l would want them for some movies, so lets see what kind of fixing up they will need,
Mustie- I had 2 old '70s Ariens snowblowers with the same carb. Pull the high-speed jet again and look VERY carefully for a second even tinier orifice. If you don't know it's there you'll never see it. A magnifying glass will help, yeah, it's that small and very easy to get clogged. I think I used a .015 guitar string to clean it out. Until I found out about it I was never able to get them to run very well: hard starting when warm and ratty idle and constant fiddling with the mixture screws. Once cleaned they ran great. And yes, a fuel shutoff and filter is a must with these carbs. Every time I was done using the machine I would shut the gas off with the engine running to run it dry. Tell your friends.
@leedress2187
5 жыл бұрын
Nice find. My buddy's snowblower wouldn't work last week. From watching your channel it only took me an hour to fix it. Rust in the float bowl was going into the jets. Carb cleaner and guitar wire fixed it right up! Thanks to you I knew all the things to look at. Thank you.
@lonedrone4725
5 жыл бұрын
My Sunday just got great with a MUSTIE video!!!!! THANKS MAN!!
@IanM18
5 жыл бұрын
It's Monday here in the UK, but what better way to chill at the end of the first day back at work.
@YouTubeSupportTeams
5 жыл бұрын
Been watching Musties vids for a good while now and apart from the quality of content being excellent with hands on work and no stupid intros or music (he's on point with how to make an engaging video) he genuinely seems like just a really nice guy
@dockspa
5 жыл бұрын
Thanks Mustie for bringing us along again. I'm sure it is kind of a pain in the ass doing the camera and talking while you're working but we do appreciate it...
@Gmtail
5 жыл бұрын
Funny story.. I remember when these first came out in the early 90s, they gained popularity fairly quickly although me personally, after using it a few seasons as a kid they were more trouble than they were worth.. Anyway, my dad got one, around the same time he also bought a new Harley Heritage Softail. My Uncle visited whom was an interesting guy from the deep woods, and my Dad walked him into the garage to show him his Harley pride and joy..My Uncles eyes lit up, he said Wooow, that thing is so awesome. My Dad said yeah, it's the new Harley such and such with the Evo motor.. My Uncle without skipping a beat said noooo not that, the CHIPPER VAC,,Even got the 5Hp Model... 😂.. Kinda took the wind out of my Dads sails, but he did go use it and pick some leaves up..lol
@jamesshanks2614
5 жыл бұрын
Get a small utility trailer approximately 8x15 and box it in to hold leaves, grass, woodchips etc. run hose from vacuum hauled behind yard tractor lawnmower. Advantage is far more storage then one trash bag. After dumping in compost pile clean and put away dry. Nice pics Mustie1 Cheers!
@Omahabigbill
5 жыл бұрын
My Sears 5hp chipper/shredder does the same thing. If you shut it off when it's hot, you have to wait about 5 minutes before it will start again. It started so easy a 4 year old could pull the rope hard enough to start it. Bought it in '85. Yep, it's 33 years old and all I do is change the oil and the plug, and sharpen the 3 blades at the start of spring. Love the show!
@danielleknight2752
5 жыл бұрын
HI MR MUSTIE1, my husband David has been watching your channel for some time now and just recently he picked up an old mower that was left for garbage pickup on the side of the road. He just got it going and he got such a kick out of getting it running! He doesn't have a youtube channel so he has "made" me get on mine and tell you "thanks for giving me the confidence, patience and ability to do it". (and let me just say, he didn't have much of any of those previously!!!!!:) So thank you again and greetings from Gold Coast Australia!:)
@duenge
4 жыл бұрын
I bought this chipper last year, a 20 y/o unit just like this. Replaced some parts, but found many parts I just couldn't find...Luckily, I have it going, and sharpened the blade, she chips fine. Muffler is missing, but its base is still there. Can't get the screws out. LOUD. I'm picking up lot's of little TidBits of good info, Thanks Mustie...
@ivanferguson2019
5 жыл бұрын
Just parked the ole mack for the night, was gonna hit the sack but seen a mustie vid......grab a cup of coffee and go to bed later....
@johngassmann9581
5 жыл бұрын
Thanks for posting these vids on Sunday mornings. Gives me some motivation to get after my own projects.
@PaulThomas-qo9vy
4 жыл бұрын
I enjoy seeing your informative fix-it machine videos. Someone just gave me the same model Troy-Bilt chipper/mulcher/vacuum with a few minor issues, non-running, but with compression. Your video encouraged me to dig into it. It seems like a low hours machine, probably gummy/dirty carb, hard fuel line, etc.. Thanks, you encourage me to keep trying, though I'm mobility "challenged" & it hurts to move, I do love to fix machines. Cheers, Paul
@johnrudy9404
Жыл бұрын
Hey Mustie, just found you after issue with my TroyBilt(Garden Way was a subsidiary/laterally tiered co.) So, critters chewed through SP wire. Will try to fix. Can say that used this machine(and it IS a machine, not really civilian ready). If you can vac dry leaves, it's a monster. Reduces a yard of leaves to just a couple of curb side paper bagfuls. If wet, frequent removal of the side plate is needed to clear the static shred cowl. A lot of the weight comes from the flywheel, which has chipping teeth. The dead man switches are there for safety. NEVER EVER FOOL WITH THE INTAKES. USED properly, it makes quick work of all tree and ground debris. Good luck to others who have one.
@annachrissy4874
5 жыл бұрын
Mustie, I wanna thank you for the videos! I recently tackled a high end, expensive rear tine tiller that I bought out of an estate. I found inspiration to take on this project from your videos. I got lucky, I had both spark and good fuel, but it needed plenty of other work. Thank you for helping me earn a living! The tiller sold a few weeks ago!!!
@heathersmith8491
5 жыл бұрын
So I've come to the realization that when my hubby says let's spend time together, he really means let's watch Mustie1 😂 wouldn't have it any other way😂💜 I've learned so much from your videos. I'm sure my hubby has too😂
@kencramer1697
5 жыл бұрын
Beautiful Bernese Mountain Dog there at the end. :) We had one as a kid when we lived in Colorado. Such great dogs with awesome temperaments. Oh and the yard sucky whatchamacalit was fun to watch too. :P
@fitzjug
5 жыл бұрын
Having worked on small engines for years i find your videos very informative and entertaining and i learn something every time. Keep up the good work.
@bisratderebssa3371
5 жыл бұрын
Thanks to your videos I was able to identify the problem with my generator, clean the carburetor and fix it. Thanks again.
@thomasjohnson9768
5 жыл бұрын
Rainy Sunday, Coffee and Mustie video, what a plan. My wife thinks I’m crazy, I can’t understand why?
@HalfAssHomestead
2 жыл бұрын
This came in very handy. I just purchased one of these that is 20 plus years old, and for the life of my, I could not get it to start. The prior owner put a kill switch on it, but I didn't know that it was already built in. Thank you for such detailed information on this.
@mreynolds6232
11 ай бұрын
I just got one of these machines and watching this video taught me a lot thank you sir
@Taulksik
5 жыл бұрын
Great video to learn some more information before work, Love the videos and information you provide
@mikeshobbiesandrandomstuff
5 жыл бұрын
Hi Darren thanks for yet another great adventure hanging out with you in the garage.
@rauldemoura2417
5 жыл бұрын
You hit the nail on the head! My TroyBilt is very similar, with a 6”diaX10’ Vacuum hose,for cleaning a garden area. Mine is elect start/pull start back up.... Same size bag, chipper & cage, but an 8HP Briggs... I LOVE this machine!
@toms641
5 жыл бұрын
Wow, that wood chipper goes pretty good for a little 5 hp. Nice work Mustie!
@BeeABaw
5 жыл бұрын
Happy Sunday, Coffee and Mustie makes for a great Sunday morning. Life is good.
@richardwarnock2789
5 жыл бұрын
Mustie you fixed that dogs kick starter!!!!, Thanks worth every breakfast time for Mustie!!
@robertfountain4856
5 жыл бұрын
You "guys" don't know how interesting these are from an Australian viewpoint. Everything is so different. Even the kind of grass is different. Picking up stuff and leaving the tail gate open will cop you a "Unsecured Load" ticket here with a $400 fine. Keep up the videos which take me back to my youth doing crazy patch up jobs to extend the usable life of something.
@TomsTinkeringandAdventures
5 жыл бұрын
I always recommend small engines to anyone who wants to learn mechanics. It's a great way to learn the basics of how to fix engines, troubleshoot, tune, etc. Carburetors!!
@altonriggs2352
5 жыл бұрын
What a great way to start the month...a video from Mustie!!
@johnmoreno8649
5 жыл бұрын
You make it look so easy to work on power equipment. Thanks for posting. Keep up the great videos...
@genejudgejr6931
5 жыл бұрын
Mustie your right there are more attachments, a hose as you described and a leaf tray, that you can attach and rake leaves into, and machine sucks them off tray. I grabbed one of these off Craigslist last year, didn't run , cleaned carb and works well, but transmission is funky, I heard that the transmissions are a common failure point.
@darinwhite5475
5 жыл бұрын
From Waterloo, Ontario Canada, thanks again, Mustie. The shifter cable adjustment reaffirms my belief that we should at least open up gear that's not working right to have a look. I really appreciate all your work on the channel.
@KevinJohnson-fx6wq
5 жыл бұрын
Nice machine, just needed some basic maintenance. I thought it did really well considering the wet leaves matted down. They're hard to rake up. Thanks for sharing.
@aleblanc3547
5 жыл бұрын
Another great project and, as always, fun to watch and learn. Thanks Mustie!!
@Niterider73
5 жыл бұрын
I have that exact same troybilt. Heavy heavy machine! Love mine though. Glad you're doing a video on it, just in case I have trouble with mine.
@oldpackfan
5 жыл бұрын
Every dog has that banjo playing spot .
@Shane-Singleton
5 жыл бұрын
That they do. Usually somewhere between the front leg and the bottom of the rib cage. I love dogs.
@2DogsVlogs
5 жыл бұрын
Only my girl seems to have one.
@davestout8471
5 жыл бұрын
My family calls it the "fiddler". I couldn't tell you why.
@heatherbrown2761
5 жыл бұрын
So glad to see a Tecumseh engine on here. I love those little engines. Had the best service out of Jacobsen J321 based engines, Lawnboy Duraforce, Any other Lawnboy engine and then Tecumseh engines in that order. It is hard to compare to the J321 though, solid engine/short block. =)
@Shane-Singleton
5 жыл бұрын
No better way to start the day than with a little caffeine and a Mustie1 video. Pretty cool little leaf/chipper machine. You don't see those very often around here where i'm at. I think most people that vacuum up leaves have an attachment for their lawn mowers like we've seen on some of the ones that you've worked on in the past. I could really use one of those chippers though. I've got a few piles of small brush that i'd like to grind up and clear out.
@user-lu5mi7kv2x
5 жыл бұрын
Get the coffee ready, another fantastic video - thank you Mustie.
@tommy2facetv
5 жыл бұрын
M is it really you here?😁
@myrajohnson1973
5 жыл бұрын
To keep mice, rats and rodents out of your leaf bags or interiors of vehicles that you store just put dryer sheets inside! Rats and mice won’t go near them! After watching the Troy Bilt chipper/ vac video I thought I’d let you know. This really works, I’ve tested it!!! Good luck. My boyfriend and I love your videos.
@briandiehl2846
2 жыл бұрын
Love the sound of screws clicking loose!
@w2dmw
5 жыл бұрын
Bought one new for $1500, at the time. TIP: mow your lawn short before leaves fall, then use chipper vac before leaves get wet. Good chipper for cleanup of small twigs, branches of small thickness...
@5150mxVW
5 жыл бұрын
Good to see the other Tundra get some play time ! As usual , nice work !
@arthurfricchione8119
5 жыл бұрын
I also own a simpler shredder and it was very hard to start after the initial start-up. For years I fought it. Finally, I tore it apart and cleaned the flywheel and Magneto area with fine scotch bright and it starts the first or second pull every time. When starting the second time I use full Throttle and say 3/4 choke and starts fine. Many owners complain about hard starting, Hope this helps. 👍 Yes it's B/S motor and its Troy Bilt
@hobbyaddict9908
5 жыл бұрын
Kudos on restoring the safety switch. Many folks would just leave it as is or intentionally bypass it.
@blindmelonlemonjello
5 жыл бұрын
If he sells it or donats it that safety disconnet being fixed cant bite him in the ass later but not reparing it or ignoring it may
@hobbyaddict9908
5 жыл бұрын
@@blindmelonlemonjello I wasn't questioning his motives just praising his good judgement in restoring the safety device.
@blindmelonlemonjello
5 жыл бұрын
@@hobbyaddict9908 yeah brother i agree its all good 👌👍😁
@1903bretep
5 жыл бұрын
Another great video, thanks. On the issue of cable ties becoming brittle after time out in the sun try using black ones which do not deteriorate on exposure to UV light unlike the clear type.
@grandcelebration2233
5 жыл бұрын
@Mustie1 Thank you Sir. Mine wouldn't start. Opened the fuel chamber as you showed and yep it was flooded. Drained and cleaned it all up. WD40'd the stuck throttle and flicked it back and forth until it moved like yours. Fired it up and it started like a champ! Throttle started closing in the Fast position so looks like I have to tighten the cable, but for now just stuck a piece of wood between the short pin and throttle lever to keep it running. Previous owner hadn't changed the air filter in 20 years it appears, so ordered a replacement. Should be running like new very soon. You saved me a bunch of money and educated me at the same time, so thank you for that! Liked and subscribed!
@michaelb.5345
5 жыл бұрын
Morning coffee and Mustie 1 the Teach, equals a great morning..PS....It will work when teach is done !
@scottgm321
5 жыл бұрын
Andy words of wisdom for sharpening chipper blades other than balance is vital. Thanks
@notajp
5 жыл бұрын
I believe you are correct about missing a hose to go on the front. There is likely a block off plate to go on the bottom when using the hose. Then there are the chipper screens as others have mentioned. Since Troy Bilt is owned by MTD now, don’t know if you can still get parts. MTD doesn’t always do a good job when it comes to support for older products.
@byronsshop7493
5 жыл бұрын
I've always been fascinated with rotary engines and would love to see you build a bike with one.
@KubotaManDan
5 жыл бұрын
Got that same gardenway carb on my old 1988 tuffy tiller, thanks for the fix'n lesson.
@darrenh20102
5 жыл бұрын
In the UK we see adverts for aspiring artists to go spend some time at a villa in France or Italy to learn how to paint properly. I think you should set up a 'glamping pod' in your garden so you can invite me over to be taught how to 'wrench' by a Master. Seriously though, I absolutely can't stop watching your tutorials, they're by far the best I've ever found and I only hope to have half your skills before I get too old. Keep em coming and thanks
@bernerdad4135
5 жыл бұрын
Cool video, especially the Bernese Mountain Dog at the end! We have two of them, great dogs!
@williamhathaway3351
5 жыл бұрын
Enjoy your videos. On Tie-Wraps - The white ones are not intended for outside use and the sun will break them down. The dark color ones are intended to be expose to sunlight and all break down. Also there is a great tool for installing Tie-Wraps - search amazon for tie-wrap gun. Have a great day
@GregsGarage
5 жыл бұрын
I always love seeing the pups! That machine is a pretty nice tool to have in the garage.
@majordisappointment8692
5 жыл бұрын
Nice machine would be very useful thanks Mustie.
@jeffreywhitesell7871
5 жыл бұрын
I used to have one of those models is a 8 horse that came on it mine I broke the same little black safety thing on it and I went to get a new one from the dealership where I bought it and he said right after I bought my Troy-Bilt discontinue to the model so you can't even get parts for it it ran good throughout the years then I let my brother borrow and he broke the chipping screen inside of it and it broke everything underneath that hood where the vacuum part is and so I took the motor and scrap the rest and sold the motor for a log splitter love watching your videos keep the good ones coming we didn't live so far away I offer you something for that John Deere you got to I got an identical one and I need a hood for it boys crashed the lawn mower
@JayLampang
5 жыл бұрын
Hi Mustie1, been enjoying watching all your videos, educational and very informative, thank you sir. I'm in Los lunas, New Mexico, just south of Albuquerque.
@biglakewheeler
5 жыл бұрын
You’ve become my favorite channel. You’ve gotten me to get a project 85 Suzuki LT50 to restore fore my 3yr son. You should do some chain saw videos. They’re commonly found dead from fuel issues and such and their carbs unique. Also would love to see a double cab video. Thank you for another great video Mustie👍🏻
@nodak81
5 жыл бұрын
Finally! I was jonesing for a Mustie1 video!
@Dan_Kornfeld
5 жыл бұрын
I’ve used stainless key rings to attach the lanyard to safety interlock switches (jet ski).
@silverbullet7434
5 жыл бұрын
A lynch pin is used in the drive wheel. With out it allows quick turns and maneuverability. By welding it it will drive ok but greatly increase turning radius. Nice chipper vacs but very expensive when new , the hose attachment was an extra charge. You could make one by using the round mount comes off main housing it would mean making a plate and welding a ring for those attachment on the side . Good luck
@mustie1
5 жыл бұрын
not true, it has an open diff in the transmission
@mandostudent
5 жыл бұрын
Hey Mustie, I just binged and completed the Farmall motor rebuild. Before that I had very little knowledge of combustible engines. Now at least I understand some basic concepts of how parts work with each other. Many people our age from the south grew up riding one of those or similar units in the field. I didn't have much time for shop class unfortunately, but you might call me a mechanic of humans. Forty years practicing general surgery now retired and have time to explore lessons like your videos. Have you considered rebuilding small marine diesel engines such as two and three cylinder yanmars? Nevertheless, I will continue to enjoy your vids as long as you want to make them. Thanks again. Joe Butler southwest Florida.
@mikeplant9163
2 жыл бұрын
well that sucks!!! it does now Mustie's been at it. great video , thanks Mustie.
@bigchiefbear
5 жыл бұрын
Really enjoy your videos.you have helped me sort out several probs in my machines. Thanks and great work. Jason. Boston. Uk.
@vharrald
5 жыл бұрын
Musti you definately got that magic touch at bringing equipment back to life. Great work again
@matthewcohen1504
5 жыл бұрын
That was fast Mustie! I knew you could do it. I held my breath watching you turn the idle screw... that muffler burned my hand more than a few times. Loved the ending
@w2dmw
5 жыл бұрын
BTW they had a safety cover instead of the front hood for use with the chipper. It helped with the air flo, moving the wood chips. It had a permissive clip on it. That's the extra clip on the front of the unit. also, use the choke every time you start it and you'll have no problems.
@ralphups7782
5 жыл бұрын
So sorry for not getting here earlier, but my Christmas/ happy holidays has got even better.may I declare that you tube is the television and watching styles of the future . Some one out here show grandmother and grandfather how to get on line.😂😉
@goalieguy6708
5 жыл бұрын
I have this unit, had from new, the other front attachment is a shut so you can rake leaves into it. it does work really well. I think I paid 800 for it new.
@ralphramirez7815
5 жыл бұрын
Picked up a Toro mower on the side of the road. Gas tank full of water. Carb gummy. $16.00 Carb and it runs like new. I Mustied the hell out of that SOB. Thanks Mustie1 for the confidence to give it a shot.
@SirWilhelm46
5 жыл бұрын
Perfect timing. I have the non-self propelled on the way. My task will be the bazillion seeds from the yard weeds we have here (khaki weed). Short of burning them they get onto to everything and then into house and rugs. Now I know what to do if the has problems. Tnx
@Chr.U.Cas1622
5 жыл бұрын
Dear Mustie1 Very well done respectively good job as always. Great combination machine, never seen one of those in good ol Germany. Best regards
@design2survive
5 жыл бұрын
Everyone was saying...”you gotta go check out mustie1”...great, now I can’t stop watching. Fantastic!
@aaronphx420
5 жыл бұрын
Well done
@MRrwmac
5 жыл бұрын
Mustie1, couple of very nice acquisitions and a really nice neighbor to give them to you for our “edumacation”! Thought you were gonna work on the blades or I missed you saying you did them. Seems to chip well if done slowly! I have a plastic bagger for my leaves but no chipper. Oh well.
@aaronphx420
5 жыл бұрын
I love that hammer, best deadblow hammer you can buy, you can use it on everything. My favorite hammer :-)
@tkskagen
5 жыл бұрын
Nice Chipper/Bac. Wish I had one so that I didn't have to pull out my Snapper Push-Mower to MULCH! Chipper/Vac looks like it does a better job with Wet Leaves too...
@atcguy77
5 жыл бұрын
A friend had one just like this and loaned it to me. I REALLY didn't want to give it back. Unless I missed it in the video, you are missing the 'shredder' part that fits on before putting on that round cover with the vacuum scoop. It doesn't move, but looks kind of like a squirrel cage fan basket and surrounds the whirling impeller blades. As the leaves and such get sucked in by the impeller, the impeller blades give a kind of scissors-action to chop them up into coin-sized pieces. It may be hard to find one, but I remember seeing one on Ebay not too many months ago, so yes, they can be found.
@atcguy77
5 жыл бұрын
A follow-up: the part in question is called a "leaf screen" and there are two types available; a standard one that gives an 8:1 shred ratio and one that has more cross members for an 11:1 shred ratio. I just saw some on Ebay - available, but not cheap.
@dubbeh
5 жыл бұрын
was waiting for " gonna drop that bowl" haha everytime .. paused time to get a brew and enjoy teardown :)
@MrSneakyGunz
5 жыл бұрын
Mr. Mustie1, Next time consider a small, robust, flat split key ring for that safety interlock. Would look almost stock. Bye the way, love your content. I learn Each Day shadowing you.
@clauslundberg9224
5 жыл бұрын
Great video - If I had 10% of your skills I'd set up shop. Thanks for sharing another M1 fix-up
@drewalsup9200
5 жыл бұрын
That chipper seemed to work great on it. Another nice name brand freebie. Mustie gets all the good stuff.
@mosipd
5 жыл бұрын
Just lovin' this string of "can we fix it" videos, more please Mustie!!
@travelingdude33914
5 жыл бұрын
Found your videos a couple weeks ago and I think I've watched them all now. I'm addicted 🤣
@Guillotines_For_Globalists
5 жыл бұрын
I found one of these in the trash a few years back, it was a Craftsman. Got it running. It was a really hard sell here in my area but I think I ended up getting $250 for it eventually. Took almost a year I think. I was so tired of seeing it at that point because it took up quite a bit of precious room of mine in the garage. It does seem like a pretty pointless tool though. People rake and rake and rake and rake and I just mow the leaves. No big deal. Then again I don't live in the forest, but I thought mulching the leaves would be quite healthy for the lawns.
@w2dmw
5 жыл бұрын
there is a critical piece missing, Mustie. An insert gets put in around the 4 bladed wheel; this insert has many slits in it, as a blower would have. It doesn't turn of course. It's purpose is to keep the leaf material grinding away until it can fit through the slits, making for a finer discharge material. Google it to find an exploded diagram. You are correct, however, it is a Troybuilt, made just around the time it was taken over by Gardenway. Since that time, all their stuff has lots more plastic in the structure of products. ...BTW, I paid $1500 for mine, brand new.....
@earlblakley4910
5 жыл бұрын
I have one of these also. Garden way was the original troybilt. Now everything with the troybilt name is made by mtd. Yes the screen is missing. You might catch one on ebay. Garden way parts are getting hard to find.
@wildefox1478
5 жыл бұрын
Great job fixing up that chipper/vac, it's a pretty decent machine!
@Big_John_C
5 жыл бұрын
Another useful score! That will save the back next fall.
@frankenberry9670
4 жыл бұрын
The chipper blades probably need to be sharpened. The chipper I have has double edged blades so you can flip them when the first set of edges gets dull. I sharpen every tree or two of branches. If you pay attention you can tell when the branches start becoming hard to feed into the chute. Instead of pushing harder either change or sharpen the blade(s). It makes a noticeable improvement and puts less stress on your engine and drive train and bearings.
@1983bronc
5 жыл бұрын
On the axle.. Sometimes there is a removable Lynch pin that is placed in one side of the axle. That way, once removed, the unit is able to be turned easily without fighting with it or ripping up the grass.
@chrisschultz143
5 жыл бұрын
Thank you for the videos they have helped with my own stuff and always like to support a car “bug” guy.
@Ajaxaxxess
5 жыл бұрын
Always always put in a new plug Mustie! 2.00 is cheap insurance. Thanks for sharing buddy. I uploaded a couple videos of the Pingauer.
@theone2be33
5 жыл бұрын
"We're gonna make plan B into plan A and call this one plan B. Sound good?" Quote of the Day!!
@rverro8478
4 жыл бұрын
I don't consider welding a rim to a shaft being fixed.
@heatherbrown2761
5 жыл бұрын
Saw you jump too when the basket fell. Kinda giggled at you on that one. :P
@pauljsims
5 жыл бұрын
Great vid. Could use a key ring metal ring on the plastic safety clip. Would be strong and not rust.
Пікірлер: 479