Hey Andy, From what I used to build, what came from the other mfg over in Auburn, n all we used to see from BEC and any of the Syracuse shops back in the day. You sure do an outstanding job turning out your truck bodies. Great attention to detail if ever I've seen. Thanks for sharing Andy.
@huckelberryauditor5583
6 ай бұрын
Its going to be hard for Nate to beat his original Thought Of The Day. Masturbation never gets out of hand!
@VariableSpring
6 ай бұрын
Truck looks good Andy, now time to get that concrete pad done out the from of the shop.
@randycharest4507
6 ай бұрын
ENJOYED WATCHING THE VIDEO andy 😊
@norman8269
6 ай бұрын
That box made that truck look a 100 percent better, makes it look like a different truck. Another job well done.
@timpriest4373
6 ай бұрын
Another great silage box install, the tailgate lock is simple and works well. The 8130 is looking brand new. When I'm out to that part of the state I stop at byrn dairy and grab a sandwich and a chocolate milk. Keep up the great work.
@patrickerger7271
6 ай бұрын
Great looking box and awesome the way it operates.
@hayman1971
6 ай бұрын
The master at work!!! 👍 If your brothers are as good at there jobs as you are the cows must be major milkers!!! 👍
@desertdweller4951
6 ай бұрын
Sure looks great, thank you for sharing Andy. Looking forward to your next video.
@williammurphy1592
6 ай бұрын
Great job team. 👍🏻 I am looking forward to sitting in the driver’s seat of this in the future.
@jarredholt5037
6 ай бұрын
Nice seeing everything come to fruition…Should start a side gig building forage boxes on HD Truck chassis
@jonathangreenwood6379
6 ай бұрын
Great video Andy box all built you , very talented guy
@markreetz1001
6 ай бұрын
Glad you finished up truck 9. Box looks Great!!
@gilreynolds9282
6 ай бұрын
Great job on truck 9. It will be good to see it in the field.
@jimmclean160
6 ай бұрын
Andy I thought Jarrod sold that MACK truck??
@roba4297
6 ай бұрын
You'll have to give Nate a couple of weeks notice for a thought of the day........at least
@markf350s
6 ай бұрын
Nice job looks good my friend you guys do some quality work and also appreciate all the videos and the time it takes to make them look forward to the next one stay well, my friend
@beckyumphrey2626
6 ай бұрын
Very nice looking heavy duty box. Great video.
@charleslynch7274
6 ай бұрын
Way to go on finishing that truck up I enjoyed watching you work on it
@steveb6103
6 ай бұрын
I wouldn't call what we had here, winter. It we cold for maybe a week and the little snow we did get was gone in days. If it isn't a wet spring, the farmers will be in trouble. The nearby lake looks to be ice-free. The normal ice off date is April 15.
@johnhenderson299
6 ай бұрын
Great job on truck 9 just like a new truck
@garthland
6 ай бұрын
next time you come down to Chuck's try a push-pull out for aluminum.You'll be blown away on how much better it is over a spool gun. I would even let you run my welder-no one else at work is even allowed to touch it,they would get beat like a runaway slave!!
@farmerbill6855
6 ай бұрын
Get somebody to wax that cab when you get a nice day, it'll shine like a new penny. Sweet truck. Best regards from Indiana.
@Skip-z5g
6 ай бұрын
Andy I know you busy you need to paint the rear rim s
@kaldudas9651
6 ай бұрын
Great job Andy on the install of the box and the design of tailgate lock I see Christen working muffler certificate 👍🚜
@desertdweller4951
6 ай бұрын
Sure looks great, thank you for sharing Andy. Looking forward to your next video.
@desertdweller4951
6 ай бұрын
Sure looks great, thank you for sharing Andy. Looking forward to your next video.
@desertdweller4951
6 ай бұрын
Sure looks great, thank you for sharing Andy. Looking forward to your next video.
@desertdweller4951
6 ай бұрын
Sure looks great, thank you for sharing Andy. Looking forward to your next video.
@Mainly-boy-outdoors
6 ай бұрын
Nice job Andy.
@jasonhoffmann7317
6 ай бұрын
Andy, why dont you cut a couple of holes for the hoses to run through for the gate instead of running the hoses over the rub rails? Eliminate the chances of someone rubbing against a wall and wrecking the hoses. Just a thought.
@FarmingFixingFabricating
6 ай бұрын
I’ve done that before
@stephenbradbury460
6 ай бұрын
Andrew why do you have extra axale in front of drive bogies on frame. Only see this in USA
@FarmingFixingFabricating
6 ай бұрын
It’s for heavier loads
@donniehodge2548
6 ай бұрын
Another good Job Andy 🇺🇲🚜🐄👍
@mr.lynnrosaasen8218
6 ай бұрын
You obviously have an in with an engineer to get that tail gate locked with air apart from the hydraulic sestem!
@markgordon6887
6 ай бұрын
How about fenders over those rear wheels? You drive these trucks through all that slop.
@edwhite6250
6 ай бұрын
👍
@MarvUSA
6 ай бұрын
Sounds like your getting stuff done Andy. Good job on mfg. and installing that box and hoist. Thanks for sharing.
@Brian-wy7ts
6 ай бұрын
Quiet achiever and deep thinker, that's my thought of the day about Nathan
@rogerfrank1256
6 ай бұрын
Truck looks nice Andy. You should give the wheels a nice coat of white paint and it really pop
@stevenclaeys6252
6 ай бұрын
Thank you for another great video. Cheers
@Mainly-boy-outdoors
6 ай бұрын
Andy I thought Jared was going to sell the Mack did you talk him out of that?
@JohnR9965
6 ай бұрын
Truck 9 needs some paint on the rear rims….😂😂 lookin awesome Andy….
@petenolte4192
6 ай бұрын
That box will probably outlast the truck.
@alisciamarotta3888
6 ай бұрын
Thanks for sharing. Always enjoy your videos, hell of a box, like the locking idea. It's not done till you put your signature on it (stickers) 😊
@corlehomesteadfarms920
6 ай бұрын
I been installing kits from tractor interior upholstery in a couple of our tractors over the years. I like the quality of them.
@Darren-q3r
6 ай бұрын
Hi
@calvinrhoades4406
6 ай бұрын
Need to zoom in on box decals so we can see what it says!😊
@anthonysmith6204
6 ай бұрын
Truck looks very nice 😊
@farmer_nk
6 ай бұрын
Can you bend the hydraulic cylinders/rear gate if someone tries to open it without unlocking the pneumatic lock?
@FarmingFixingFabricating
6 ай бұрын
No
@pattoohill5307
6 ай бұрын
Lol. Thst was a lot of thinking at the end 😂
@brendon9489
6 ай бұрын
Them back rims could use a paint job
@x_Dude1
6 ай бұрын
"i don't know" Life goes on.
@tiredoldmechanic1791
6 ай бұрын
I don't recall seeing any dogs or cats in your videos. Do you have a dog? I know it difficult to keep a dog when the house and barn are on opposite sides of a fairly busy road. Almost all farms have cats as feral cats just show up where there are mice.
@FarmingFixingFabricating
6 ай бұрын
Yes we have 2 dogs
@kenpalmer1900
6 ай бұрын
If you try to put the tail gate up in the locked does it monkey anything up?
@FarmingFixingFabricating
6 ай бұрын
No it won’t, the relief in the gate valve is set low
@kenpalmer1900
6 ай бұрын
Thanks I could just see someone forgetting to unlock and running the tailgate bending something
@Planeiron
6 ай бұрын
Great Vid👍👍👍👍🍗🍗🍗🍗🍺🍺
@michaelwatson4822
6 ай бұрын
Nathan's thought of the day could be , Andy can I have a day off please he's a hard working person
@johnquinn3899
6 ай бұрын
Lots of engineering and skills with this project Andy.
@strobelightbrian
6 ай бұрын
Nice!
@martinboilard2265
6 ай бұрын
Hi Andy ! Good looking for truck #9 and good job ! Thanks Andy for your time and everybody have a good day at the farm ! 💖🙋♂️
@johnwinslow4503
6 ай бұрын
Sweeeet !
@steveharrington301
6 ай бұрын
👍
@burtzorn4059
6 ай бұрын
Another great truck you guys have put together. Take care and stay warm !!!!
@peteschiavoni
6 ай бұрын
Great job on the silage box Andy!
@charlestallardy5685
6 ай бұрын
I think it might be time for Nate to get his SAG card!
@terrydarow8401
6 ай бұрын
You guys did a nice job on the truck looks great
@alistairholroyd4071
6 ай бұрын
You do do a nice job on those trucks and Nathan cracks me up he’s funny
@nycat7906
6 ай бұрын
Andy have they started to enforce the covered load requirements up your way?
@JonDingle
6 ай бұрын
Top job!
@bobhomestead7396
6 ай бұрын
Looks sweet Andy.
@JoeFoley-s4d
6 ай бұрын
Great job 🚜😄👍
@bobthesnowman8929
6 ай бұрын
Looks good Andy.
@Adam_Poirier
6 ай бұрын
Box looks excellent Andy. You really blow some of these other body companies out of the water. How much money do I have to send you to mail me a Hourigan Welding truck bodies sticker ?
@FarmingFixingFabricating
6 ай бұрын
I’ll get you one
@bradgifford3122
6 ай бұрын
Have you ever thought about cutting a hole where the hydraulic hoses go around the outside of the box and drop them straight through the frame to keep them from rubbing against anything the box might rub against? You could put a rubber boot on them where they go through the slopes plate so silage can’t get into the hole
@FarmingFixingFabricating
6 ай бұрын
I’ve done it before
@lolMyke
6 ай бұрын
The way they are is better for maintenance and serviceability
@bradgifford3122
6 ай бұрын
I bet they would fit inside a 2” piece of tubing you could weld in there… take the hoses off at the fittings and pull them through… that way when the clown that backed into the 4620 decides to back into the side of the bunk you don’t need new hoses
Пікірлер: 84