When i saw the mask i realise that this video is very recent 😆 , nice build.
@Basstaco69
3 жыл бұрын
I said the exact same thing 🤣
@dessancoleman1355
3 жыл бұрын
Fr 🤣🤣
@UncutNinjaDope
4 жыл бұрын
Keep it up loving the videos much in-depth
@BoBuilds
4 жыл бұрын
Thank you!
@codysmith3857
3 жыл бұрын
Good video buddy 👍 keep up the good work and hope all is well with you and your family and keep living life to the fullest
@mr_lite_
4 жыл бұрын
Now we're cooking! Glad to see it back brother
@rebelmadesaint3118
3 жыл бұрын
Sick flames bro
@Hohmies86
2 жыл бұрын
Like the pause for effect beer opening lol
@martinduraie3316
2 жыл бұрын
Why is it so slow @16psi? What size turbo are you using?
@throughmyeyesmedia6492
4 жыл бұрын
Keep it up with the sohc bro! I want to boost my D16z6 later on when I get a chance. And that’s cool you can tune your own car.
@whyumadtho355
3 жыл бұрын
bro u can tune your own car by yourself too! this isnt rocket science. Pick up a textbook and start reading. You essentially want to just richen the car and monitor knock as you slowly lean it out and pull some timing as well as monitoring the air fuel ratio. Try it brotha you can do it too.
@8ballskater123
3 жыл бұрын
@@whyumadtho355 preciate the motivation, gonna save me the $400 tune
@lamella64
3 жыл бұрын
do you need hulog as well to datalog? i want to budy an ostrich but i'm not sure what i need.
@shawnhelzer874
4 жыл бұрын
Nice!!!!!!!
@goodvibesonly1920
3 жыл бұрын
Badass build bro, recommend for budget build for bottle end for boost?
@majorkin19
4 жыл бұрын
Good shit bro, how did you manage to blow your turbo??? aren't you running a oil restrictor??
@t.kickstartbun1e797
4 жыл бұрын
Hey dude where did you get the gauge holder like around your cluster
@Svmbah
4 жыл бұрын
Blox Racing 96-00 Civic Gauge Cluster this is on k series parts
@MultiCandyman1
3 жыл бұрын
What clutch are you running
@MapleSyrup89
4 жыл бұрын
pulls hard
@sr420det
3 жыл бұрын
Use the felpro non-vtec 95 civic thsts composite. Head lifting issues solved
@hatchbacklover3965
3 жыл бұрын
Sir, what did you modified for engine? Only the piston? I'm kinda interested to put a turbo on my D16.
@syrthdr09sybr34
3 жыл бұрын
There's a lot more to it if you want to do it right, and want it to last. If you do it cheaply it will never run right and blow up just like every other boosted honda on youtube.
@keeplearning4L
3 жыл бұрын
what turbo kit is it?
@mr_lite_
4 жыл бұрын
Btw your afr readings will be slightly skewed because of that coolant combustion leak
@propertarian485
3 жыл бұрын
Newbie question but will a d16y8 swap into an 8th gen civic? I have the d17 motor but there are no pistons or aftermarket support for it really. Will a d16 run on the obd2 computers?
@BoBuilds
3 жыл бұрын
Once you start modifying a d16 you need an obd 1 ECU anyway. Just grab d16y8 harness and typical obd2 to obd1 ecu adapter
@propertarian485
3 жыл бұрын
@@BoBuilds so it’ll have to be chipped at that point right?
@UNEEK_LOGIK
4 жыл бұрын
As cold as the Rocky Mountains 🏔
@BoBuilds
4 жыл бұрын
Hell yeah brother
@Ruckley69
2 жыл бұрын
What do you recommend I do to my d16y8(bone stock) to make it handle 18-20 psi at 350-400 whp, I already have the turbo and everything for it, just looking for more info on what I should do to the motor so it doesnt blow on me
@Andrew-ni4vh
2 жыл бұрын
You’ll get head lift all stock won’t even hold 10 psi from a t3t4 needs arp head studs block guard (helps with head lift) and I built my bottom end
@Jakethysnake93
2 жыл бұрын
Rods pistons, arp head studs, turbo kit, good tune
@jayd9271
3 жыл бұрын
bro i live down the street from baybrook lmfao. got a d16y8 that ima turbo too
@arlinhuynh336
2 жыл бұрын
Woah, you work at Lexus in Bay Area? Webster?? Tx??
@dannyjr7997
3 жыл бұрын
I couldn't find an EK or EG so I bought a 06 Acura TSX. Anyone want to trade?
@michealmontez8832
4 жыл бұрын
Stock rail? What injectors are you using? I'm like mid build and appreciate a link to them.
@h3xd3m0n9
3 жыл бұрын
Get injectors keep everything else stock the rail and the regulator will hold up till 700hp get 750cc or if e85 get 1500 cc
@ethanlindsey
3 жыл бұрын
@@h3xd3m0n9 Not true. You need at least an adjustable FPR when running a high flow fuel pump. I had around 70 psi of fuel pressure at idle on the stock D16 FPR with a Walbro 450, not good. You can do a trick to drill a relief hole in the stock FPR to lower the fuel pressure but it's ghetto and a PITA to drill, you're better off just doing it the right way and getting an adjustable FPR.
@Gamer-db6xp
3 жыл бұрын
Build info?
@Donnythelatemodeltech
4 жыл бұрын
Clutch Video?
@BoBuilds
4 жыл бұрын
Coming up soon, I might yank the motor and trans out with the engine hoist
@speedshop552
3 жыл бұрын
How do you setup that feature when its getting hot ?
@speedshop552
3 жыл бұрын
Nvm i just saw it jajajaja nice build, does that feature is only with hondata ?
@coldcutsfishingchannel9759
4 жыл бұрын
@greasemonkeymods I have a 2001 f150 with the 5.4 I want to put a cam in it what do you suggest my goal is to get it around 500 hp what can I do to get it there on a budget thank you
@JJBanuelos
4 жыл бұрын
He’s going to suggest 1st step LS swap 😂
@coldcutsfishingchannel9759
4 жыл бұрын
Trailblazer Films I want too😂 but I’m 17 and not a mechanic yet I’m going to tech school when I graduate high school but I wanna do it all by myself and I don’t know how to
@justinmcquaid9763
3 жыл бұрын
@@coldcutsfishingchannel9759 1st step: know EVERYTING your motor does( parts) 2nd: keep on keeping on watching, educating yourself within YOUR motor. 3: achieve your goals. You CAN do it, and with the right mindset you WILL do it!!!! Think about an engine as piecing together legos. Can u build a lego house? Can u build a lego mansion?..... Put that same "lego" concept into your vehicle build and you WILL succeed.
@andycapp8505
4 жыл бұрын
nice flooring! how much was a box?
@BoBuilds
4 жыл бұрын
Its like 25 a box. It took 10 boxes to do the whole garage so around 250$
@reedreinier8419
4 жыл бұрын
Be sure to check out M-R-C garage as well giving away a hondata s300 at 200 subs
@Wreckedekcoupe
4 жыл бұрын
Get a je proseal. They call em failpro for a reason.
@WeLoveCars47
2 жыл бұрын
A g8!
@juancruzmagliotti7092
3 жыл бұрын
stock connecting rods?
@BoBuilds
3 жыл бұрын
Speed factory forged
@jdportwerks6795
3 жыл бұрын
12.0 lean??? Shit I run my single cam supercharged vw 13.4 but of course I’m running MS 109 for fuel
@coreys121
3 жыл бұрын
This car speedometer in Kph? 100 and your barley passing people?
@ronelencarnacion8569
Жыл бұрын
Who’s barley lol you mean barely
@californiaracing5099
2 жыл бұрын
Niceee check out my d16z6 turbo 20lbs do work
@jonathanbonilla2555
4 жыл бұрын
Do u have instagram ?
@ghris5242
4 жыл бұрын
What tuning program are you using?
@BoBuilds
4 жыл бұрын
Its in the title! Lol just messing with you.. Its "Honda Tuning Suite"
@ghris5242
4 жыл бұрын
My bad, i probably misinterpreted that, thanks! Keep it up!
@BoBuilds
4 жыл бұрын
Lol no prob. HTS is free and its awesome. Download it and check it out!
@ghris5242
4 жыл бұрын
Thanks man, i've used eCtune for the past times, but i'll give it a try.
@jamesmurillo4463
4 жыл бұрын
How much hp u think?
@BoBuilds
4 жыл бұрын
Maybe 260ish
@jamesmurillo4463
4 жыл бұрын
GreaseMonkeyMods U think with a tune u could push 400? I got a y8 same setup. Idk if I should just build a z6 and be safe
@BoBuilds
4 жыл бұрын
It is tuned. 400 is definitely possible if i had supporting mods. Built head, cam, larger injectors ect. im getting there
@BoBuilds
4 жыл бұрын
Put a z6 crank in the y8 and your golden
@jamesmurillo4463
4 жыл бұрын
GreaseMonkeyMods Awesome bro can’t wait to see u ripping!!
Пікірлер: 77