You are not only amazing at your craft, you're really good at teaching & making tutorials!
@LittleWindowsResin
9 жыл бұрын
jacintamrsdarcy Wow, thanks so much for your glowing feedback! That makes me want to start the next video right away :) Best wishes with all you do, and have fun creating!
@AlottaBoulchit
9 жыл бұрын
Oh WOW I bet these would make really pretty suncatchers in a window or on a porch! SO PRETTY!
@LittleWindowsResin
9 жыл бұрын
AlottaBoulchit That's a great idea! Thanks :)
@nytflyt7
9 жыл бұрын
OMG,OMG...I just rec'd my treasure chest of supplies from Little Windows and WOW...did it get here FAAAAAASSSSTTTTT.....seriously!!! Thank You Miss Fran and I'm a little intimidated so give me time to "create" and then I'll post a pic of those GORGEOUS earring set on your Facebook!! LISTEN UP ALL U "TUBERS".....this is one of the most FRIENDLIEST owners I have EVER dealt with....I went to her website and had a question about what I should order as a "beginner" & BAAM, I had a response in my email with a snap of a finger.....GREAT, GREAT CUSTOMER SERVICE AND COMMUNICATIONS!!! So, if you're watching and watching her fabulous videos & not quite sure....take it from me THIS IS THE REAL DEAL!!!!! Luv ya, Lynda A
@cynthiacarr3294
4 жыл бұрын
I agree my Spring Drill Arrived so fast I was shocked and very happy and the handwritten Thank you on back of envelope made me feel Special! Thank you I'm looking forward to ordering again and watching these Fantastic Videos!!😁💯❤👏🏽👏🏽
@vonnie4781
2 жыл бұрын
WOW, Fran! This is one of my favorite projects, and that’s saying a lot! Thanks, you’re the best!
@moonbeamsdream1155
4 жыл бұрын
I love that that are beautiful I have been doing resin and I find it absolutely calming and soothing I hope to sell some of my pieces I also resin over my paintings and it adds so much life to them ,I’m definitely gonna try these earrings so glad I found your channel!!!
@aimeequantumcreator9826
6 жыл бұрын
You’re an excellent instructor! Love your page!!
@soulenergyartsartistmariam8086
4 жыл бұрын
Awsome tutorial! Beautiful pieces!
@vonnie4781
2 жыл бұрын
I just noticed that this was 7 years ago!! How the heck did I miss it?!?
@benicio1967
6 жыл бұрын
These are SO beautiful!!! I loved this video!! Thank you so much!!!❤️
@MichellesHandmadeCreations
9 жыл бұрын
How cool is that! Good to know it can be formed at a certain point. Like deco ideas, but don't think I'd wear these swirls. TFS!
@Zac400ex
9 жыл бұрын
Plastic rap would work too under the tape. Thanks for the inspiration.
@lucykubinandvaleriekessler7620
9 жыл бұрын
You are a very good instructor, I have watched most of your videos, I would buy almost everything in your shop if I could afford it. Alas I will have to settle for piece by piece. I cannot wait to try out my mold and doming tray. I think I will have to get the starter kit and dichro kit next! This has given me an idea for something I would like to try, I hope I can find time to make it happen!
@cynthiacarr3294
4 жыл бұрын
Ah! Very Beautiful!😁💯
@abigailgonzalez74
5 жыл бұрын
Beautiful beautiful beautiful👌🏻👌🏻👌🏻✨these are unique looking‼️ Never see this before😮😍, I Love them as a necklace😍 Great job👍🏼👍🏼 your very Talented. I hope you’ll do More tutorials For I seen U do them 1-2 x’s a year barely. You have a lot to show people‼️👏🏼
@LittleWindowsResin
5 жыл бұрын
Thank you Abigail! I appreciate your feedback and I'm working on more! Stay tuned and check out our project center in the meantime :) - Fran www.little-windows.com/pages/new-project-ideas-and-how-tos
@smitamukne6473
Жыл бұрын
Very Nice
@spencer4hi
9 жыл бұрын
Absolutely beautiful.
@MustaffaCuppa
7 жыл бұрын
Lovely ideas, well-presented.
@LittleWindowsResin
7 жыл бұрын
Thank you MustaffaCuppa, I hope you get a chance to make some of these yourself, it's such fun and they really sparkle in the light :)
@anna-nn4ix
6 жыл бұрын
you can probably wrap them into the desired shape by covering with some cling wrap .. love them
@LittleWindowsResin
6 жыл бұрын
Hi Anna! Yes you could, just be sure it's the thicker kind and avoid any wrinkles because they show up on the surface of your resin :)
@dawsie
6 жыл бұрын
You could also use cling-wrap as well as it sticks to itself as well ☺️
@helkatww3992
5 жыл бұрын
Fran, you are a genius!
@LittleWindowsResin
5 жыл бұрын
Wow, thanks! I'm having fun :)
@Yargo73
9 жыл бұрын
Congratulations! Thank you so much for sharing so interesting ideas... so the point is "mixing" ...beautiful and versatile Little-Windows Brilliant Resin "mixed" with sparkling Dichroic-film (Dicho-ISH Supplies) and Resin Color Film (Jewel Color or Pale Tints version) ...for a more full sparkling, shimmering... (and all american words ending in -ing meaning light and brilliant!) pendants, earrings, rings and all kind of creations that suggests your fantasy! The possibilities are neverending!
@Yargo73
9 жыл бұрын
@Khushiii2219
3 жыл бұрын
This is so so sooo amazing
@donnaparks1919
5 жыл бұрын
I want something really fancy for peace lilys in clear glass vases
@craftsandbargains
9 жыл бұрын
Love this Thanks for sharing!!
@annamariacastagnetti
Жыл бұрын
Beautiful earrings, but hard to follow for someone like me who doesn't know English. It would be nice to be able to have the eight titles in the tutorial. I don't know for example what kind of plastic sheet you used for the shape. Thank you if you can help me.
@LittleWindowsResin
Жыл бұрын
Hello Anna Maria! I always post complete tutorials for the projects in my videos in the Project Library at little-windows.com, so please follow this link to see close-up photos, find more details and tips for this project, and see a list of links to all materials I used. I hope you enjoy our collection of projects and products made for your resin creating! Thank you for asking :) fran@little-windows.com
@LittleWindowsResin
Жыл бұрын
Here's the direct link.... www.little-windows.com/blogs/project-center/18068893-twisted-resin
@stefanieharbeson5664
8 жыл бұрын
I just started working with resin a couple months ago, and have found your videos are the most helpful for great tips, tricks, and tutorials. Thank you for sharing! I ordered some supplies from your shop and love them, especially the doming tray; a world of possibilities has opened up! My only issue is the sleepless nights-you've allowed so much room for creativity that the ideas don't stop, haha. ;) One question: I ordered polyester resin prior to discovering your shop. Would these techniques translate easily to polyester resin?
@stefanieharbeson5664
8 жыл бұрын
+Fran Valera I tried it with the polyester resin, and it doesn't work for doming. The heat from the resin makes the paper curl, so all my pieces are warped. It's kind of a neat effect, but not what I was going for, haha. Live and learn! I bought some of the Little Windows resin and am remaking my pieces. Love your products! And I can't believe how fast shipping is. Thank you! I'm sure I'll be making purchases regularly. :)
@angelpadua3996
7 жыл бұрын
BEAUTIFUL !!!!!!!!!!!!!!!!
@joyanarqhy
5 жыл бұрын
this is what I need...thanks u so much for ur video... I can see my future success in acc is starting from here.. Wish me luck asap.. Jesus Bless u,, sis...
@LittleWindowsResin
5 жыл бұрын
Very best of luck Joy, have fun creating!
@creativeplanetjanet
3 жыл бұрын
I'm trying to understand why one layer of film is not enough to support the resin. What happens if just one layer is used? Could the film be placed directly on a silicone mat instead of the doming tray for more support? Maybe use some double sided tape to make sure it stays put on the mat while doing the first pour? Then move to doming tray when it's time to pour the other side. Or is a certain thickness needed for a shaped substrate for some reason? Maybe so the resin doesn't run off the edge?
@LittleWindowsResin
3 жыл бұрын
Hello Creative Planet Janet! There are some different pieces in this tutorial, if you use Resin Color Film it can be domed on a single layer, but the Texture Film is just too floppy to support resin in a single layer, so you need to double it up. You can also use clear packing tape to give it more support instead of 2 layers of film. The purpose of the Doming Trays is to support your cut out pieces, while creating a clearly defined edge so the resin knows where to stop flowing. Brilliant Resin is perfect for jewelry and small decorations like these, the surface tension will keep it from flowing over the edge, as long as you have clear edges. If you try to dome anything on a flat surface the resin can't tell where to stop and will flow off and under your piece, not forming the nice rounded edges you get on the Doming Tray. If you have a look at this tutorial it'll make more sense: www.little-windows.com/blogs/project-center/embossed-dichro-ish-film-earrings Let me know if I can be of help in any other way :) fran@little-windows.com
@creativeplanetjanet
3 жыл бұрын
@@LittleWindowsResin Thanks Fran!
@shhhon
Жыл бұрын
Could you please turn the captions on?
@chind6
6 жыл бұрын
Like this idea. can you tell me, it looks like you only apply the resin to one side. Can you confirm that is right
@hkreations5108
9 жыл бұрын
Beautiful! Can you use rubbing alcohol to get rid of the scotch tape residue?
@LittleWindowsResin
9 жыл бұрын
+Garden Guru You can try that, if it doesn't work try a bit of acetone on a cotton swab :)
@lwhitt9655
3 жыл бұрын
I love your work especially the earrings. Have you by any chance wrote a how to book? Thank you
@LittleWindowsResin
3 жыл бұрын
Thank you! I haven't thought of writing a book, thanks for the idea :)
@playgrounddolls7766
6 жыл бұрын
Maybe you can wrap them in kitchen cling film?
@pascaletauzin9760
3 жыл бұрын
très joli et astucieux, dommage qu'il n'y ai pas la traduction en Français car je ne parle pas votre langue. Merci pour le partage.
@SuperBotanica
6 жыл бұрын
it is easier if you put glitter into the resin
@donnaparks1919
5 жыл бұрын
Can I make something spiral strong enough to make & hold a vase with a wall support ?
@LittleWindowsResin
5 жыл бұрын
I don't think so, unless you reinforce it with wire as you would to create strong fairy wings. Hope that helps :)
@magikdust2095
8 жыл бұрын
This looks really cool, and I'm wondering if it'll work with the kind of resin that I have. I know that after 24 hours thinner layers are bendable, but after 48 it's hard. I've never tried using it with the iridescent sheets in this video though. I do have one suggestion, that you put a link to where you can buy the supplies you use in your video description.
@LittleWindowsResin
7 жыл бұрын
Hi Magik Dust! Sorry your message was trapped in a holding area. Have you had a chance to try this technique with the resin you have on-hand? Thanks for the suggestion, your thoughts are welcome :) You can find all of the products I use in this tutorial at little-windows.com Have fun creating!
@magikdust2095
7 жыл бұрын
I actually haven't tried this yet. I ment to after I saw your video, but I had completely forgotten that I wanted to try it. I don't have a very good memory LoL. I did do something else with the reason I have that makes me think that it will work for this though, so Thank you for the link :)
@nerdypeachmango
8 жыл бұрын
This is brilliant. M curious can you use cellophane or normal scrapbook paper? If so how would you get the backside sealed so it's not just exposed paper? Thanks!
@nilsnyman6767
5 жыл бұрын
How would you go about doming both sides?
@LittleWindowsResin
4 жыл бұрын
Hello! It's much harder to do this with twisted pieces, because if the first side sets up before you dome the back, it won't be twistable. You could make 2 pieces, stick them back-2-back, then twist or shape them as you'd like, while the resin is still bendable. Hope that helps :)
@raquelscrafts
4 жыл бұрын
Hi Fran can you please tell me if the resin measurement are always the same I am having a hard time with this resin it is clear cast 7050 I bought before I brought your every time it comes out sticky and it don't come out of the mole
@LittleWindowsResin
4 жыл бұрын
Hi Raquel, in case we didn't talk about this via email, since that's not our product you'll need to chat with the maker, but it may not be appropriate for use in projects like this. Every resin has a different chemistry and intended application, you may want to save that for another sort of project, or it may be beyond its shelflife. Mose epoxies have a 6month-1 year shelf life to perform as intended. Our Brilliant Resin is best used in about a year, but will be functional for 3-5 years if stored as directed on the labels. Let me know if I can be of help in any other way :) fran@little-windows.com
@hazielanath
8 жыл бұрын
I did not see the wire ribbon on your site... Where did you find it? Thank you!
@rezvankline2828
7 жыл бұрын
Hi I Love your work and instruction is very clear. I just have a question. I noticed you apply resin only to one side. Do you leave the other side without resin or you apply to the other side as well. Thank you
@LittleWindowsResin
7 жыл бұрын
Hello Rezvan, sorry for the delayed response, you won't be able to do this technique with both sides domed because the pieces will be nice and pliable at about 12 hours, but if you then flip them and add resin to the back, then wait another 12 hours for that side to set up, the first side will then be too hard to shape. I hope that saves you time experimenting :) - Fran
@minlong2321
8 жыл бұрын
Love it. :-)
@Rosie83844
8 жыл бұрын
Hi Fran, these are beautiful and I am going to give them a go. Can you tell me if I get a sticky residue from the tape, what is the best way to remove it. I will order some amazing tape, but until it arrives I will just have to use my scotch tape. Thanks and cheers Rosie.
@LittleWindowsResin
8 жыл бұрын
+Rosie Donnelly Hi Rosie! You can use acetone, just be sure you have great ventilation - that stuff is stinky and not healthy to breathe. Have lots of fun creating :)
@Rosie83844
8 жыл бұрын
Thank you , I will be careful. Cheers Rosie.
@dnankdanco6916
3 жыл бұрын
Sangat inspiratif sekali
@LittleWindowsResin
3 жыл бұрын
Terima kasih!
@bhromormukherjee5255
5 жыл бұрын
What type of flim is this?Can't understand what you are using here.
@LittleWindowsResin
5 жыл бұрын
Sorry for any confusion, on some I'm using our Texture Film, the colored ones use our Resin Color Film, both can be found at www.little-windows.com/pages/shop
@lorihouse1766
2 жыл бұрын
Where do you get amazing tape
@LittleWindowsResin
2 жыл бұрын
The company that used to make this tape went out of business :( However, you can use our new Resin Backer Film the same way, here's a link: www.little-windows.com/collections/adhesives/products/no-residue-resin-backer-film-12-pack
@aaaamikican
9 жыл бұрын
Sooooooo cute❤️❤️❤️
@pepethepatriot7524
4 жыл бұрын
Please share more about this 3M double sided adhesive you use! What exactly is it called? Do you have a link for it? I'm having trouble identifying which to use on Amazon! Thank you for the awesome video!
@pepethepatriot7524
4 жыл бұрын
Nevermind, found them on your site and just purchased some! thank you!
@playhooky
7 жыл бұрын
Seems to me you could just use Saran wrap (or any other brand plastic wrap) instead of any tape.
@LittleWindowsResin
7 жыл бұрын
Hello, thanks for your comment. You certainly could, but I've found these thin wraps leave wrinkle marks and dents, and they don't have quite the holding power that the Amazing Tape does. So if you don't mind these things you can certainly use what you have on hand, just be sure to wrap it around at least 3 times to give your shape a better chance of holding as it hardens. Have fun making :) - Fran
@playhooky
7 жыл бұрын
ok - thanks!!!
@user-ve8kx7xe2y
Жыл бұрын
Can you twist 2 together?
@LittleWindowsResin
Жыл бұрын
Sure you can! I hope you give that a try and I'd be thrilled if you send me a pic of your creations :) fran@little-windows.com
@whereismymind9429
7 жыл бұрын
cool stuff....could you pull this resin into super fine strings to use as clear liquid strings of saliva on a model and would they eventually set hard? thank you :)
@asidmab6907
8 жыл бұрын
Question can you mix glitter into the resign to use with the colour film?
@LittleWindowsResin
8 жыл бұрын
+Asid Mab Hello Asid Mab, yes you sure can. Before you begin, have a look at this how-to video that's all about glitter in resin. kzitem.info/news/bejne/rqJmzKeDqISLlqA (or search KZitem for Resin Glitter Fun) Have fun creating and let me know how your pieces turn out :)
@raquelscrafts
4 жыл бұрын
Hi Fran long time did not hear from you i am still interested in the larger resin thank you for the information can you please give me the prices for the with shipping cost to i really hope you are fine and your family hope to hear from you soon god bless and take care
@LittleWindowsResin
3 жыл бұрын
Hello Raquel! I'm just following up to be sure you received my email with pricing for our Designer Sets? If not please let me know and I'll be happy to resend. Thank you :) - Fran
@artgrl73
9 жыл бұрын
can you use this process with recycled paper?
@LittleWindowsResin
9 жыл бұрын
Mel M Hi Mel! I'm not sure as I haven't tried it, but I don't see why not. You'll just have to experiment a bit to see what happens to the look of the paper when it's coated with resin, could be awesome!
@grefa9
8 жыл бұрын
What is that drill? where can i buy it? thank you!
@LittleWindowsResin
8 жыл бұрын
+grefa9 Hello grefa9, that's our Spring Drill, which comes with 3 drill bits (1mm, 1.2mm, 1.5mm) You'll find it at little-windows.com
@boedyranma4232
5 жыл бұрын
What film is that, and where i can get it?
@LittleWindowsResin
5 жыл бұрын
Hello Boedy! It's our Dichro-ISH Texture Film and you can find it here... www.little-windows.com/collections/resin-colors-1 Have fun making!! - Fran
@pesto12601
9 жыл бұрын
yikes.. someone has BIG ears to hold those things!@!@
@TheMischiefmanaged
Жыл бұрын
I HATE LISTENING TO THE SOUND OF TAPE
@LittleWindowsResin
Жыл бұрын
Oooh, I know, and I think it gets amplified in the video recording. I've since learned selective volume control, so hopefully you won't be tortured with my more recent videos! Thanks for the feedback :) - Fran@little-windows.com
Пікірлер: 100