Today we're bringing you the Wyze Cam v3 Firmware Fix.
Did you try to install the Wyze LAMP SOCKET using the app, and the longer power cord, (from the Wyze Cam v3) instead of the provided cable, with the triangle end? If you were using the Wyze app to install, it didn't warn you of the difference, but the Quick Start Guide, was VERY clear to ONLY use the "special cable" that came with the Lamp Socket. If you used the app, despite updating the firmware, you won't see the light, or any of its settings. Worse yet, the Wyze Cam v3 may not even work at all. If this sounds familiar to you, we have the fix. Rennie will walk you through it step-by-step, and you'll find the links for the files listed below.
Are YOU a member of our Smarthome Riggs community? Of the 51.2K views and 3.4K Watch Hrs. we've had over this past year, only 5.3% of you are Subscribed to the channel. This means 94.7% of you are watching and sharing our videos, without supporting the channel with a "SUB". We appreciate you visiting, but if this isn't your first time here, please Subscribe & join the Smarthome Riggs community, by clicking here. kzitem.info... It only takes a second and it really helps our channel grow.
We try to post videos each week, and you won't want to miss what's coming up. So, don't forget to "Ding that Bell".
Stay tuned to Smarthome Riggs for more Smart Home solutions you can use in YOUR home.
--------------------
Flashing Firmware for Wyze Cam v3
--------------------
1.) Wyze Cam v3 files can be found on the Release Notes page.
support.wyze.com/hc/en-us/art...
2.) Download a specific version of firmware
For Windows 10: Right-click on the folder and select extract all.
For Mac: Just drag and drop the folder, put it on the root directory of your microSD card.
For both Mac and Windows, rename the file to "demo_wcv3.bin".
This is different from the Wyze Cam v2 & Wyze Cam Pan which rename the file to "demo.bin" only.
3.) Power off your camera and insert your microSD card.
4.) Hold the setup button, plug in your USB cable, keep holding the setup button for 3-6 seconds until the light is solid purple, then release the button.
Note: For "Solid Purple" both the blue and red LEDs will be on at once, making it appear to be a solid purple.
5.) Wait for 3-4 minutes. The camera will reboot and change the light status during this time.
6.) Once this is done, your camera should be functioning with the original setup. No need to re-setup your camera!
for more instructions, go to Wyze's URL:
support.wyze.com/hc/en-us/art...
--------------------
TIME CODES FOR THIS VIDEO
--------------------
INTRO: [00:04]
SLASH SCREEN: [00:18]
BRICKING YOUR WYZE CAM V3 & STEPS TO FIX IT: [00:24]
THE FIX: [02:46]
Steps to flash firmware & where to get files: [02:56]
Firmware Fix, (pause video & take picture if needed): [03:00]
Walking through the process, step-by-step: [03:10]
Loading new firmware: [04:57]
After the flash: [05:52]
Success: [06:18]
Reboot after Lamp Socket Firmware 0.9.0.7: [07:11]
Turning Lamp Socket off using "lamp icon" in cam feed: [07:57]
Testing & changing Detection Settings: {08:28]
Note regarding the Triangle cable: [09:00]
FINAL THOUGHTS: [9:12]
OUTRO: [09:37]
SOCIALS: [09:46]
There are links below, for the items we used, shared & discussed in this video. They don't cost you any more money if you use these links, but they help the channel. Thanks for checking out another of our Smarthome Riggs video.
Smarthome Riggs - Helping your Smart Home tech work for You
--------------------
LINKS and PRODUCTS used:
--------------------
WYZE STORE on Amazon: amzn.to/3CAIJno
Wyze Cam v3: amzn.to/3qt7H5f
Wyze Lamp Socket: wyze.com/wyze-lamp-socket.html
Wyze Bulb WHITE (4-pack): wyze.com/wyze-bulb-white.html
Wyze Switch (3-pack): wyze.com/wyze-light-switch.html
Wyze Solar Panel: wyze.com/wyze-solar-panel.html
Wyze Cam Floodlight: wyze.com/wyze-cam-floodlight....
Wyze Light Strip Pro: wyze.com/wyze-lightstrip-pro....
Wyze Outdoor Power Adapter: wyze.com/wyze-outdoor-power-a...
--------------------
SMARTHOME RIGGS - SOCIALS
--------------------
KZitem: / smarthomeriggs
FACEBOOK: / smarthomeriggs
TWITTER: / smarthomeriggs
PINTEREST: / smarthomeriggs
INSTAGRAM: / smarthomeriggs
And you can always support the channel by donating here.
PAYPAL: www.paypal.me/sriggs747
We couldn't do what we do without our subscribers, so thanks again for supporting the Smarthome Riggs channel
Smarthome Riggs - Helping your Smart Home tech work for You
--------------------
#Firmware #Fix #WyzeCamv3 #LampSocket
Негізгі бет Un-Brick Wyze Cam & Bring it back to life!
Пікірлер: 61