As dedicated and as strict attention to detail as back in years we were collaborating on our little ventures. Enjoyed the build. Looks amazing. Enjoy!
@prime1964
4 ай бұрын
Thanks Sega
@yeltsin666
5 ай бұрын
Sweet! I love the fans with the little LCDs on them--way cool!
@prime1964
4 ай бұрын
Very cool
@LiannLee1666
2 ай бұрын
Just built my latest pc in that case. Watercooled and all lianli tl lcd fans ..supercase💥💥💥💥
@Vialli100.
3 ай бұрын
Same as my case, the best out there.. Couldn't afford Lan li uni fans, so I got TZMRIT copies and they are brilliant.. £23.99 Amazon UK for pack of 3.. Great build and so easy in the Evo..
@Big_Swanga
2 ай бұрын
Strimer cable going over the top of GPU and running through back grommet would show more of the RGB cord and less attraction on the non rgb portion. All in all a beautiful build this is exactly the build im doing this summer for my first personal build. "The Dream PC" as they say. Great content bro, im now a subscriber..🔥👏👍🏻
@the_dude_plays4711
Ай бұрын
really nice build
@TheAngry-AmericanGuy
Ай бұрын
YOU NEED A VERTICAL MOUNT DUDE, ALMOST GOT IT RIGHT! : ) That cable is dragging and does not look good like that!
@leciovmb
Ай бұрын
Good job, the assembly was amazing. I have a question about the case... If I want, can I push and pull on top? I intend to buy this case and do a similar assembly, but I wanted to use the watercooler on the top using push and pull.
@prime1964
Ай бұрын
@@leciovmb you can do a push pull configuration on top. The case has an option to install the motherboard to a lower location, but the top part of the motherboard and a part of the upper fan in the back will be partially blocked from view.
@leciovmb
Ай бұрын
@@prime1964 It makes sense. I hadn't thought about that point. It may be better to assemble it in the conventional way, because push and pull doesn't make much of a difference in terms of temperatures. Thanks for responding.
@Michael-pm7nu
6 ай бұрын
Awesome Buld Prime19
@prime1964
4 ай бұрын
Thanks!
@unmaykr1434
Ай бұрын
Nice build Between lancool 3 and evo rgb which one has the better temperature? Especially for gpu
@prime1964
Ай бұрын
@@unmaykr1434if i recall correctly, the gpu temps for both cases weren’t that much different; However, the Lancool 3 had the better CPU temps
@unmaykr1434
Ай бұрын
@@prime1964 I think its better to go with lancool 3 i want the best airflow for all of my components i would've chosen fractal torrent if i was going to do air cooled build Do you have any suggestion besides lancool 3? Also i watched your lancool 3 build video and i didn't know you could remove ssd mounting plates on the side bracket Thank you for amzing detailed video
@prime1964
Ай бұрын
@@unmaykr1434 i actually have the fractal torrent for my other pc and it’s best for both cpu/gpu temps.
@unmaykr1434
Ай бұрын
@@prime1964 How much a difference is there between lancool 3 and torrent? Is it negligible?
@prime1964
Ай бұрын
@@unmaykr1434 2-3 deg for both cpu and gpu temps, in favor of the Fractal Torrent with both using stock fans. But if you did what i did with the Lancool 3 with the same number of fans, it should be better in temps
@mstr2e
3 ай бұрын
Love the build. I have the same case but for some reason I can’t change the LED by the motherboard software (I have asus z790)
@hankypancake
18 күн бұрын
Hello, where did you purchase the GPU support bracket that screws into the motherboard? I am looking to buy one for my PC build. Thanks.
@prime1964
18 күн бұрын
@@hankypancake it came with the case.
@ItWasBrilliant
3 ай бұрын
Does Lian li 011 Dynamic Evo RGB (Black case) have tinted glasses? I saw that case with tinted and clear glass?
@prime1964
3 ай бұрын
I’m not sure if the new dynamic evo RGB have tinted glasses. I think you’re referring to the O11 Vision Chrome
@HEROYT49007
2 ай бұрын
Which aio cooler is that ? Btw love the pc build ❤️
@prime1964
2 ай бұрын
Thanks. The aio cooler is the LT720 from Deep Cool
@kyLiedub
4 ай бұрын
👏👍
@DylanTVI
2 ай бұрын
Just to double check because I am about to basically do this exact case and fan set up. The bottom 3 fans and the vertical fans on the right are reverse blades for intake… and the AIO and single rear fan are exhaust. Correct?
@prime1964
2 ай бұрын
@@DylanTVI that is correct
@DylanTVI
2 ай бұрын
@@prime1964 thank you for the timely response!
@StevenKhoo123
4 ай бұрын
May I know whats the name of the GPU holder and where can I get it? Thank you
Smudgy and greasy hands, I think you should wash your hands and not touch any greasy surface such as your face&hair or any dirty surface until you finish the build, and then use isopropyl alcohol and a microfiber towel to clean afterwards to make sure, You can use gloves as well, but that still doesnt guarantee no-smudge at all, youd still need to wash your hands and not touch anything greasy&dirty until you finish the build
@ffblegend
2 ай бұрын
Link to that screw driver?
@prime1964
2 ай бұрын
@@ffblegend a.co/d/a4ikYSw
@ffblegend
2 ай бұрын
@@prime1964 thank you !
@spanolorenzo5809
2 ай бұрын
@michael19857
4 ай бұрын
Temperatures more positive or negative?
@prime1964
4 ай бұрын
With 6 intake fans and 4 exhaust fans, it is more positive
@michael19857
4 ай бұрын
@@prime1964 better than lancool 3? I also have Lancool 3 and I'm thinking about switching to evo, but I'm afraid of the temperatures
@prime1964
4 ай бұрын
I was getting better airflow and temps with the Lancool 3, because of how that case was designed and with the 12 fans i used in it. But ive been using the evo daily and i had no issues with temps
@Ne314satel
2 ай бұрын
Why 9 fans? If you don't have water cooling for your 4090 (the noisiest place in PC). And the software from Lian is terrible)))
@prime1964
2 ай бұрын
Why not 9 fans? I had i think 10-12 fans in my previous build. For the Lian Li software, yes it took me a few minutes to figure it out but that was it, havent had any need to look at it again, been working fine since then
Пікірлер: 48