I have a very hard job. When I get off work, I relax and watch your videos and it feels like I'm watching asmr. You deserve more.
@TheProvokedPrawn
8 ай бұрын
Glad to be able to help you relax!
@jeffreyracho2591
3 ай бұрын
What's your job
@elletSetteSellaDomoU
2 ай бұрын
He is paid a lot to do that. Not a hero.
@nakowtf
26 күн бұрын
Let me guess you just worked 20 hours at McDonald’s soy boy
@AuF5guy
8 ай бұрын
Just want to say, thanks to you and your videos, I was able to research and build my PC. They were super helpful. Much thanks and love from NY, USA.
@TheProvokedPrawn
8 ай бұрын
Glad I could help! Hope that means you're subbed too!
@AuF5guy
8 ай бұрын
Subbed for sure!@@TheProvokedPrawn
@MrSirZa
8 ай бұрын
I can't wait for my Evo RGB to arrive. Definitely coming back to this video when the time comes! Thank you so much for this!
@TheProvokedPrawn
8 ай бұрын
Hope you enjoy it!
@KaraboMokhutle
4 ай бұрын
I have a plan to build my dream PC very soon. I will come bakc to this vidoes for intruction of the TL LCD Fans and the Dynamic Evo RGB case. Thank you so much!!. This has been very helpful.
@TheProvokedPrawn
4 ай бұрын
Glad to help. 👍🏼
@Salvaj3
6 ай бұрын
I bought this case and I could say without a doubt that it's the best damn case I've ever built in, it has so much room, it's amazing I love my case and my RGB fans Lian Li outdid themselves and this video was spot on thanks for sharing the build :)
@TheProvokedPrawn
6 ай бұрын
Glad you liked the video and the case!
@AM-hm5eq
9 күн бұрын
Yep, I have the black version and the amazing thing about this case is you can place a push pull on an Arctic 420. Just remove the brace find a skinny phillips screw driver screw fans to the radiator (topside) and screw the fans to the top of the case. I replaced the bottom fans with the 140 BeQuiet Pro and top fans for now Arctic 140's. It was a test, I will purchase six Artic 140 max and replace the current setup. I love the case.
@TheProvokedPrawn
8 күн бұрын
Thanks for sharing
@DenHvideHund
6 ай бұрын
First time watching your videos. But I'll be back to see more. You are relaxing to listen to, extremely thorough on the details. I'm a fan 100%
@sherlyslife8729
24 күн бұрын
Thank you so much for this detailed guide! I feel a lot more comfortable building my own pc! so excited now to build my dream build. Thanks again provoked prawn. I've been watching this over and over till my pc parts arrive lol
@TheProvokedPrawn
23 күн бұрын
Thanks for watching! You might also find some useful tips in here: How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@ryanvicksell7266
8 ай бұрын
I'm building a new PC in this case this weekend with Lian Li infinity fans (some LCDS) and this aio! This video, as well as your ones on Lian Li fans will definitely save me time and frustration! Thanks!
@TheProvokedPrawn
8 ай бұрын
Hope it goes smoothly. Thanks for watching!
@mincraftandmore4325
7 ай бұрын
I love how informative this Chanel is, and you can almost find a review for every pc part😊.
@TheProvokedPrawn
7 ай бұрын
Thank you. Appreciate it
@Prince-mp1sk
8 ай бұрын
NEEDED THIS. I'm literally waiting on my case to start my 1st ever build. It arrives tomorrow!
@TheProvokedPrawn
8 ай бұрын
Best of luck. Take a look at this playlist too. It might be helpful - How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@Prince-mp1sk
8 ай бұрын
@@TheProvokedPrawn definitely will 🤙 thank you
@nongmech8521
17 күн бұрын
i loved how detailed your videos
@TheProvokedPrawn
16 күн бұрын
Thank you!
@draxuss4205
2 ай бұрын
Now I know why my case rgb didn't work properly for me. Thank you for this video. 👍
@TheProvokedPrawn
2 ай бұрын
Glad it helped
@I3lackI3lock
8 ай бұрын
I am waiting until this case and fans become available in my region to upgrade to this build, cant wait !
@TheProvokedPrawn
8 ай бұрын
Hope you don't have to wait long
@evanstout5071
7 ай бұрын
What an awesome build guide! I pulled the trigger on a very similar build this week and I love it! Thank you for your guidance and expertise!
@TheProvokedPrawn
7 ай бұрын
Thanks for watching and good luck with your build
@evanstout5071
7 ай бұрын
@@TheProvokedPrawn Quick question on the Lian Li LCD screens. I have everything running but the LCD screens are out of order. For example when I run the rocket animation the top screen shows the bottom animation, middle screen shows top animation, and bottom shows middle animation. Any idea how to reorder them? I tried rearranging the fans themselves and no change. LConnects currently doesn’t seem to have a way to rearrange the order of the screen displays. Thank you!!
@Screaming_GOAT_HD
8 ай бұрын
Great video! I'm currently working on the same build, just with a MSI RTX 4080 Super when it releases. Thanks for all the tips!
@TheProvokedPrawn
8 ай бұрын
Glad I could help!
@bulufish8208
8 ай бұрын
Finally a simplified video 📹 how to assemble the product 🙌 👏.
@TheProvokedPrawn
8 ай бұрын
Finally?
@bulufish8208
8 ай бұрын
Many other channels edit their way thru and not showing every detail thats what i meant................@@TheProvokedPrawn
@z1my247
5 ай бұрын
Thanks for the video.I learned something and relaxed when im watching.I will be here now.
@TheProvokedPrawn
5 ай бұрын
Glad you enjoyed! Thanks for watching
@slipnin2darkness121
5 ай бұрын
When I put your build into pc part picker, it reads a USB 3.2 gen 2 to usb3.2 gen 1 header adapter is required. What does this mean?
@MrRayr1953
7 ай бұрын
Great job in explaining the whole process.
@TheProvokedPrawn
7 ай бұрын
Thanks
@samturner3478
8 ай бұрын
Can you plug the RGB strip into the Lian Li fan hub?
@Daniel-ur3mw
8 ай бұрын
Truely excellent video ! I like how you break it down !!!
@TheProvokedPrawn
8 ай бұрын
Thanks Daniel. Hope it was helpful
@gmee123
6 ай бұрын
Need a second opinion on the fan setup Sir. I was at a local shop yesterday and I had in my cart enough fans to do this exact setup you have, however the tech told me I didn't need the single fan in the rear exhausting air and that it would create negative air pressure.
@alejandroreza6593
3 ай бұрын
Very well explained. Thank you very much.
@TheProvokedPrawn
3 ай бұрын
Glad it was helpful! Hope you enjoyed enough to subscribe 🦐
@AceDotBoogie
8 ай бұрын
Right in time, all my parts just arrived 🫡
@TheProvokedPrawn
8 ай бұрын
Nice. Enjoy!
@narutoparker1
16 күн бұрын
What about the case lights how to they work and where to plug in
@Vialli100.
6 ай бұрын
I had some old magnetic filter in an old case, so I fitted those on the side panel o11 Evo..
@TbirdThunderHD
2 ай бұрын
Love your wall art!
@TheProvokedPrawn
2 ай бұрын
@@TbirdThunderHD thanks. They're from Displate
@Mark__A
7 ай бұрын
Nice build but I managed to do a much better cable management in the same case.
@TheProvokedPrawn
7 ай бұрын
good for you, I wasn't trying
@MrGobaz
Ай бұрын
What do you think about using two 140 LCD fans on the side instead of the three 120 fans? Would it look bad or whats the main reason you did not?
@GanJosie
5 ай бұрын
I hope lian li will release evo xl rgb. I have both xl and original evo, but xl much better.😅
@allenaraujo4473
7 ай бұрын
I need an update on this....I recently saw another video apparently u cant connect the LCD and other fans to the same controller...you need to use the controllers that come with the fans...
@TheProvokedPrawn
7 ай бұрын
You can connect the to the same controller. As long as it's. TL controller
@LV--rd6cm
8 ай бұрын
Great vid. It would be nice a side by side comparison with the Vision
@TheProvokedPrawn
8 ай бұрын
Alas I can't do that but there's this kzitem.info/news/bejne/1JulmKuKgoKml4I
@CrisCheese_
3 ай бұрын
its a shame lian li dont have any aios with the tl fans, id buy them in a heartbeat
@TheSjuris
Ай бұрын
They do now.
@Varowo
4 ай бұрын
Hi, could you confirm me if the horizontal anti-sag bracket accessory is included in the O11D Evo Rgb case pls? Btw I think I told you in another video but your voice is soothing and you explain things very clearly. I love it :D Thank you very much!
@CYONX-BUILT
5 ай бұрын
No Rotten Tomatoes. 2 Thumbs 👍👍 up. 👌
@samisaykali6391
2 ай бұрын
What do the rgb settings look like for your fans and case?
@Improvement-it1gy
3 ай бұрын
do the side fans (which you have with the display) have to be reversible? I wanted to take the regular ones and put them on out-blow, would that be right? and another question is, should pumps look towards RAM if possible, or is this also not necessary?
@ucNguyen-tl1zs
8 ай бұрын
can you please give me more information about PSU regulator because i did not see any review about them and they did not list in PSU tier list as well. Thank u very much :D
@Victorious8966
8 ай бұрын
Great video! I am getting this case next week, also running with a 4070 ti AERO which actually comes with the support bracket but after watching this video I think going with the Lian Li one may be a better option. I am a little concerned with my PSU as its the Corsair switch model, meaning it has the modular plug coming from the front instead of the back on normal case setup. My concern is that with the recess that this case has for the PSU and with the switch version, the cables will actually be coming from the top. I think it may especially using this video as a reference but we shall see. White infinity reverse fans are incredibly hard to come by today so I ended up going with the SL120 which is okay as I already have them in my current build though they are v1 and these new ones are v2. I am not using the Lian Li controller as I use signalRGB to control my rgb and the controller causes latency. To get around this I have the Razer Chroma Controller which works great but needs cable adapters. Thanks for the great setup walkthrough! Very well done!
@TheProvokedPrawn
8 ай бұрын
I used the Switch in a previous build in a Lian Li case and it was fine. you should be good.
@justatim8143
8 ай бұрын
I like the anti sag bracket but not the color as a all white case should have all white components.
@HarryPotter-xr4ss
3 ай бұрын
Sorry if this is a stupid question but, would I need to order extra cables, or will everything I need be included in all the ordered parts? I got a bit lost in all the information. Great video btw!!
@adrewdh98
5 ай бұрын
Bro said screw the cable management and slammed the back pannel LOL
@rajibtechbd3070
Ай бұрын
my dream
@TjTjTEADGE
6 ай бұрын
Which item does the fan controller come with? Also ur so underrated. I dropped a sub!!!
@TheProvokedPrawn
6 ай бұрын
Triple pack fans
@TjTjTEADGE
6 ай бұрын
@@TheProvokedPrawn thanks
@TjTjTEADGE
6 ай бұрын
@@TheProvokedPrawn what’s the mobo?
@scpmusic1225
6 ай бұрын
Are the fans at 26:33 the reversed or normal version? Thank you so much for this detailed video!
@TheProvokedPrawn
6 ай бұрын
Those are the reverse blade ones
@scpmusic1225
6 ай бұрын
@@TheProvokedPrawn Thanks! Just to make sure, reverse blades are for air intake and the normal ones for outtake?
@paarinshah2924
6 ай бұрын
if my motherboard doesn't have 3 pin argb 5v connecter, will the RGB not work for the fans/case
@Espon123
7 ай бұрын
Hi, I connected the pwm cable from the controller to an NZXT Kraken elite fan connection. However NZXT Cam doesn't see/set the fan speed. I assume it's not possible with these fans?
@AviFN.1
4 ай бұрын
i am using the same mobo and case as you but on pcpartpicker it says that I need a A USB 3.2 Gen 2 to USB 3.2 Gen 1 header idk what to do with this
@Divyam4070
2 ай бұрын
How do u chnage the direction of fan throwing air
@mattsvanengelenburg8050
Ай бұрын
I have a question about the fans. Are the aio and rear not reverse fans and the bottom ones reverse blade fans? Do I need a extra usb hub for the fans on the motherboard?
@venomvenom6971
8 ай бұрын
beautiful chassis! i have a question though for the evo rgb, is the vertical gpu mount possible for a reverse setup, and if it is, would it sag since there wouldn't be anything to actually hold it like in the standard build style.
@KevinNguyen-zx2px
4 ай бұрын
So if I'm NOT using an AIO, and my CPU heatsink uses 2 fans - would it be right to buy 12 of those Lian Li fans that fit together (UNI fans)? or 9 and 3 different ones for the heatsink and back exhaust
@rkashsggeggr6285
8 ай бұрын
What if I have an older board from am4 that uses the old front panel connectors?
@Jlongoria_04
8 ай бұрын
Is there other psu that I could use that’s basically the same they don’t have the one you used in the U.S
@TheProvokedPrawn
8 ай бұрын
Sure. Most ATX PSUs should fit. kzitem.info/news/bejne/xYSpy4quqqOSpWU
@markhalstead2386
8 ай бұрын
Have you tested cooling with the GPU vertical vs horizontal?
@Ikaeuosmou
27 күн бұрын
Does anybody know if the tl lcd fans include a controller?
@TheProvokedPrawn
27 күн бұрын
If you get a triple pack, yes. kzitem.info/news/bejne/yKx6vJ2gj2aiqYo
@Planehazza
8 ай бұрын
Wish I could find these fans in stock! Any ideas when Lian Li will ship them to UK??
@TheProvokedPrawn
8 ай бұрын
They should be available from Overclockers
@marv8686
8 ай бұрын
Will the lcd fans be a possibility if one is thinking of a 4080 super i wonder.
@jonathonbaker4039
6 ай бұрын
Is it possible to sync all fans(control hub),case rgb and Lian li strimer if your motherboard has 2 5v argb header.
@flaccus123
7 ай бұрын
Would the Corsair RMX Shift work in this case. Concerned the 15mm of extra psu space at back of case might block the psu connecters. Thanks.
@smugbiz
8 ай бұрын
I like the QOL improvements on this case but I hate how empty this case looks. i think i’ll be staying with my evo. 140mm fans are not a solution, this case look goofy as they don’t even properly fit the side mount. another deal breaker for me are those hideous cable grommets, they’re grey and just too big for no reason. imho i’d rather take the OG Evo with its support bar over the RGB
@presscovfefe
7 ай бұрын
If I wanted to do this same case, fan setup, and aio setup, but adding the Lian Li Strimer cables (one 24 pin, and one dual 8 pin) how might you go about doing that if there aren't enough USB headers on the particular motherboard?
@halacron1
7 ай бұрын
On my motherboard, ASUS Rog Strix X670E-E, the manual says it supports 6x USB 2.0 ports on the headers. I'm not sure if that means a total 6 or 6 per header. So solution is simple, buy a 4 port internal USB 2.0 hub.
@kamerontranter1169
6 ай бұрын
My aio lights up and mobo and my GPU and my ram and 24 pin strimmer on but rest of my fans 6 LCD are not running what so ever and I've got no display either not sure what's gone wrong
@inmitch
8 ай бұрын
I too plan on building next month with this case, TL-LCD fans on a side mounted radiator and SL-INF fans everywhere else. I'm curious whether TL-LCD fans will pull enough air though a radiator and whether I'll have to run two Lian Li controllers, one SL and one TL. I may have to run the rad at the top, but apparently that is louder and not as efficient as a side mounted radiator.
@TheProvokedPrawn
8 ай бұрын
Yeah unfortunately I don't know whether they will. I'm not sure I'd trust it
@Greatsword77
3 ай бұрын
개인적인 컴퓨터 부품추천해봅니다. 부품추천 01 01 CPU 라이젠 AMD 5600G 또는 AMD 5600X 버미어중에 택1 (내장그래픽만 쓰려는 경우 5600G세잔 추천) (처음부터 외장그래픽카드를 쓰는 경우 5600X 버미어로 추천) 02 CPU쿨러 PCCOOLER 팔라딘 400 WHITE (AMD AM4) (증정되는 무뽑기 방지킷 확인하기 !!!) 03 써멀구리스 ARCTIC MX-4 04 메인보드 B550 D4 (M보드 풀사이즈 관계없음) (바이오스 업데이트 확인 필수급) (B450 D4에 바이오스 업데이트 해서 사용가능) 메인보드 브랜드는 개인적으로 아수스 TUF, STRIX,PRIME 추천 05 램 (메모리) 삼성램 DDR4 3200Mhz 8기가 2개 16기가 (DDR4메인보드와 DDR5램 호환안되고 DDR4램과 DDR5메인보드 호환안되니 크게주의) 06 SSD 하이닉스 P31골드 1테라 (SSD에 운영체제,시스템,게임 등등설치위주) 07 하드디스크 3.5인치 500기가 ~1테라 제품 (하드디스크에 자료저장위주) (개인적으로는 도시바,WD 제품위주로 추천) 08 파워서플라이 내장그래픽카드를 쓰다 나중에 외장그래픽카드(4060또는 4060TI) 추가하려는 경우 마이크로닉스 WIZMAX 750W 80PLUS SILVER ATX3.0 PCIE5 등등 그래픽카드 권장사양W이거나 그 이상 ATX 3.0파워 서플라이추천 추후 외장그래픽 카드 추가계획이 없는경우 일반 ATX파워 600W ~ 700W추천 (예시 마이크로닉스 클래식2 600W 풀체인지 80PLUS BRONZE 230V EU 등등 구축하는 컴퓨터사양 호환문제 없는 제품 09 케이스 앱코 G30 트루포스 화이트 또는 앱코 G40 시그니처 화이트 중에 택 1 추천 10. 사용하다 고장난경우 저장장치에 있는 데이터 자료들 전부 백업 이후 운영체제 교체로 대부분 해결 그래도 안되는 경우는 고장난 부품만 찾아서 제조사 AS받거나 스펙 호환및 실제 조립 작동에 문제없는 부품으로 교체 TIP 외장그래픽카드 추가려는 경우 3060또는 4060 또는 4060TI 추천 외장그래픽카드 추가 계획이 없거나 3060 그래픽카드 추가시 ATX파워로 선택 4060,4060TI 그래픽 카드 추가시 ATX 3.0파워로 선택 (개인적으로 그래픽카드 회사는 기가바이트,사파이어,아수스 추천) 개인적으로 외장그래픽카드를쓰는경우 5600G 세잔 대신 내장그래픽 기능없는 5600X 버미어 추천 모든 부품은 개인적으로 추천하는 예시 제품 이외에도 스펙호환뿐만이 아닌 실제사용에 무리없는급 사양 제품이면 다른 제품으로도 교체 호환 사용가능 02 개인적인 고사양 및 하이엔드급 컴퓨터 부품 추천해봅니다. (이 댓글의 모든 해당자료는 2024년도 글작성시점 기준 자료일뿐이니 참고) 고사양 7800X3D 7900X3D는 스스로 대장급 공냉중에 순위권, 또는 순위권 3열수냉 선택필수 (대장급공냉 누수우려 완전해결) 순위권 3열수냉쿨러는 대장급공냉보다 더 뛰어난 쿨링으로 인한 더 안정적인 성능기대치 (개인적으로는 3열수냉을 더 추천) 부품추천 7800X3D 또는 7900X3D 공냉 부품추천 02 - 01. CPU RYZEN 7800X3D 또는 7900X3D 중 택1 02.써멀구리스 Arctic MX-4 03.CPU 쿨러 3RSYS Socoool RC1900 WHITE AMD AM5 소켓 04.메인보드 B650 또는 X670E추천(대장급 공냉쿨러 이므로 풀사이즈 보드(M보드가 아닌)이고 SSD슬롯 바로 아래에 그래픽카드 슬롯이 있는 제품위주로 추천 = 스펙으로는 메인보드,큰 듀얼타워 CPU쿨러가 호환되도 실제 직접 조립시 공간간섭으로 조립안되는 문제가 있을 수 있으므로 확인필수)메인보드는 개인적으로 기가바이트 AORUS 시리즈 추천 (B650 , X670) (최신 바이오스 업데이트 확인필수급) (DDR4메인보드와 DDR5램호환안됨 DDR5메인보드와 DDR4램호환안됨 크게 주의) 05.램 DDR5부터는 반드시 전문가와 상담 이후 구매 추천 (스펙표시 DDR5 몇 Mhz라는것이외에!!! 실제 호환성,실제조립이후 성능확인,4개사용시 Mhz저하,공간간섭 등등 확인필수!!!)개인의견으로 흔히들 상담할만한것이 하이닉스 DDR5 5600Mhz A다이언락 호환성일듯 싶으며 게임용으로는 16기가 + 16기가 32기가 또는 32 + 32기가 64기가 추천 (DDR4메인보드와 DDR5램호환안됨 DDR5메인보드와 DDR4램호환안됨) (개인적으로 오버클럭은 권장하지않음) 06.SSD 하이닉스 P41플래티넘 1테라 또는 SSD슬롯이 PCIe 5.0인경우 마이크론 크루셜 T700 SSD 1테라추천 (SSD에 운영체제,시스템,게임 등등설치위주 추천) 07 하드디스크 3.5인치 500기가 ~1테라 제품 (하드디스크에 자료저장위주 추천) (개인적으로 도시바,WD 제품 추천) 08.그래픽 카드 기가바이트 라데온 RX 7900 XT 시리즈 또는 기가바이트 4090중 택1 09.파워서플라이 마이크로닉스 WIZMAX 1200W 80PLUS PLATINUM 풀모듈러 ATX 3.0 (PCIE5) (추천제품이외에도 ATX 3.0 규격 그래픽카드 권장사양 W제품이거나 그보다 약간 더 높은 W제품이면 호환가능) (플래티넘,골드,실버,브론즈,스탠다드 = 에너지 효율등급 관련) 10.케이스 앱코 P3000 제우스 ARGB 미들타워 PC케이스 화이트 11. 케이스 추가 쿨러 6개 상단 3개 3RSYS SILENCE SE 140[시스템쿨러/140mm] 파워서플라이 커버 장착부 제품설명 5번위치 1개 (파워서플라이 바로위에) 3RSYS PF-12025 WHITE 시스템쿨러 (120MM) 1개 측면 2개 3RSYS PF-12025 WHITE 시스템쿨러 (120MM) 2개 3+1+2 = 6 TIP 사용하다 문제생긴경우 데스크탑 저장장치에있는 자료 백업이후 운영체제 재설치로 대부분해결 그래도 안되는 경우 고장난부품만 제조사AS보내거나 호환되는 다른 제품으로 교체해결 주기적인 써멀구리스 관리 숙지 (고성능 CPU에 공냉쿨러 이다보니 써멀구리스가 굳어서 컴퓨터가 느려지기 이전에 미리 재도포 개인적으로 ARCTIC MX-4로 2년에 1번 재도포 추천) 추천제품들 이외에도 스펙호환 및 실제 사용에 문제없는 제품들이면 다른 부품들로도 사용가능 02 - 02 7800X3D, 7900X3D, 7950X3D 수냉부품 추천 01 CPU RYZEN 7800X3D, 7900X3D, 7950X3D 중 택1 02.써멀구리스 Arctic MX-4 03.CPU 쿨러 DEEPCOOL LS720 WHITE 3열수냉(AMD 소켓 AM5) 04 메인보드 B650 또는 X670E (M보드 또는 풀사이즈 관계없음) 개인적으로 기가바이트 AORUS 시리즈 추천 (최신바이오스 업데이트 확인 필수급) 05.램 DDR5부터는 반드시 전문가와 상담 이후 구매 추천 (스펙표시 DDR5 몇 Mhz라는것이외에!!! 실제 호환성,실제조립이후 성능확인,4개사용시 Mhz저하,공간간섭 등등 확인필수!!!) 개인의견은 흔히 상담할만한것이 하이닉스 DDR5 5600Mhz A다이언락 호환성일듯 싶으며 게임용으로는 16기가 + 16기가 32기가또는 32기가 + 32기가 64기가 추천 (개인적으로 오버클럭은 권장하지않음) DDR4메인보드와 DDR5램호환안됨 DDR5메인보드와 DDR4램호환안됨 06.SSD 하이닉스 P41플래티넘 1테라 또는 SSD슬롯이 PCIe 5.0인경우 마이크론 크루셜 T700 SSD 1테라 추천 (SSD에 운영체제,시스템,게임 등등설치위주 추천) 07 하드디스크 3.5인치 500기가 ~1테라 제품 (하드디스크에 자료저장위주 추천) (개인적으로, 도시바,WD 제품추천) 08.그래픽 카드 기가바이트 라데온 RX 7900 XT 시리즈 또는 기가바이트 4090중 택1 09.파워서플라이 마이크로닉스 WIZMAX 1200W 80PLUS PLATINUM 풀모듈러 ATX 3.0 (PCIE5) (추천제품이외에도 ATX 3.0 규격 그래픽카드 권장사양 W제품이거나 그보다 약간 더 높은 W제품 호환가능) (플래티넘,골드,실버,브론즈,스탠다드 = 에너지 효율등급 관련) 10.케이스 앱코 SUITMASTER U3000 갤러리 ARGB 강화유리 11. 케이스 추가 쿨러 앱코 엣지 듀얼 140 ARGB 스마트쿨링(WHITE) 3개 측면부착 사용하다 문제생긴경우 데스크탑 저장장치에있는 자료 백업이후 운영체제 재설치로 대부분해결 그래도 안되는 경우 고장난부품만 제조사AS보내거나 호환되는 다른 제품으로 교체해결 주기적인 써멀구리스 관리 숙지 추천제품들 이외에도 스펙호환 및 실제 사용에 문제없는 제품들이면 다른 부품들로도 사용가능
@qprof
8 ай бұрын
Great in-depth videos, The Provoked Prawn.... How is this compared to the Corsair 5000T you did a deep review last year, would you recommend this over the 5000T after your experience with Lian Li 011D Evo RGB or other case in comparison such as the NZXT H6 Flow you also review, as I am getting second thoughts (already picked up the 5000T case already with 6 AF120 Corsair fans and AIO cooler, extra RBB commander, Meg Ai1300P power supply, Ryzen7950x34, RTX 4090 but not yet started build)?
@TheProvokedPrawn
8 ай бұрын
5000T is a great case. You should be happy with your purchase. I personally prefer Lian Li but only for looks (and possibly this has better airflow due to the bottom fans) but I certainly wouldn't say send your stuff back and buy other things.
@BBDINC1
7 ай бұрын
What are your thoughts on replacing the radiator fans with 3 140mm. I want to mount the radiator on the side with 3 reverse blade 140mm lcd fans.
@TheProvokedPrawn
7 ай бұрын
You couldn't, they would be too big
@Manzo98_
7 ай бұрын
Dude u have a problem with all the TL LCD screens not sinking? Some work, but a couple fans ain’t sinking making it show it’s not plugged in
@TheProvokedPrawn
7 ай бұрын
Apparently if you use port 1 that can be a problem
@murilovieira09
8 ай бұрын
O que eu não entendo, é que posição dos fans inferiores e superiores são as mesmas, então como o superior está como exaustão, se estão na mesma posição dos inferiores ?
@TheProvokedPrawn
8 ай бұрын
The bottom ones are reverse blade
@murilovieira09
8 ай бұрын
@@TheProvokedPrawn Now I understand, that's why I was confusing, thank you very much, good job
@REALTALKEUGENELANE
7 ай бұрын
NICE
@TheProvokedPrawn
7 ай бұрын
Thanks
@minji_
8 ай бұрын
Hey, I'm going to be following this build guide once the case releases here in Australia. Is it possible for me to use the Corsair iCUE H150i ELITE LCD XT and replace its stock fans with lian li's uni fans? If possible, how would I go about doing that? Thanks!
@TheProvokedPrawn
8 ай бұрын
kzitem.info/news/bejne/12uhqoqQppeBjIY
@kimurarin.oceanempire
6 ай бұрын
если вы смотрите этот ролик в переводе ии от яндекса, то просто переключитесь на 18:18. я чуть не умер от смеха, переслушиваю уже раз так пятый
@justpat69
8 ай бұрын
Quick question do you see a drastic change in temps depending on where you mount the ssd's? For example like behind the mother board compared to the fan slot? Im interested in buying this case but i usually run a lot of storage in my pc and this has been on my mind ever since.
@TheProvokedPrawn
8 ай бұрын
I've not tested that so I can't say I'm sorry
@dimensionpug1419
8 ай бұрын
Just wandering if the way you've put ur fans is right i might be mistaken but arent they all intake?
@TheProvokedPrawn
8 ай бұрын
Bottom and side are reverse blade intake fans. Top and rear are exhaust
@Knowledge021
8 ай бұрын
Hi I had thought the AIO already came with thermal paste on it? So do you recommend still adding thermal paste? Would two layers of thermal paste be better?
@TheProvokedPrawn
8 ай бұрын
It has thermal paste. I've already used this one and needed to reapply fresh
@thesagaofblitz
8 ай бұрын
Would that power supply work for the white asus 4090 oc? Or should I buy a different one? Love your videos BTW. I have the Lian Li rgb case too. Bought it from your videos.
@TheProvokedPrawn
8 ай бұрын
Yes it would
@AnkerAuctions
8 ай бұрын
I can confirm you cannot run infinity fans with lcd fans. You will need two controllers. I ran into this issue since I only had one usb slot left on my motherboard. Lian li sells a splitter for this exact situation but I do have to run two controllers
@TheProvokedPrawn
8 ай бұрын
Thanks for sharing
@AnkerAuctions
8 ай бұрын
@@TheProvokedPrawnthank you for making this video. Can’t believe I basically built this exact PC on Monday. This would have been sooo helpful 😂😂
@Defiansy
4 ай бұрын
do the lcd fans needs to be reverse blade ?
@TheProvokedPrawn
4 ай бұрын
Depends where you're mounting them
@Defiansy
4 ай бұрын
@@TheProvokedPrawn same as yours
@lethalno1
8 ай бұрын
Can I change out the aio fan cable for a single cable?
@TheProvokedPrawn
8 ай бұрын
I'm not sure I get what you mean
@Eden-vm8sb
6 ай бұрын
Hello, does the fan controller come with the case, the fan pack or do i need to buy the fan controller seperately? apologies if this was mentioned in the video and i missed it. Also do i need seperate controller for TL120 uni fans (not lcd) and SL120 uni fans?
@TheProvokedPrawn
6 ай бұрын
With the triple pack and yes, you need different controller for different fans. See here - kzitem.info/news/bejne/yKx6vJ2gj2aiqYo
@sizzly_xd5698
7 ай бұрын
Can someone write to me here which fans were intake and outtake wanna keep it for when this case comes to Sweden
@TheProvokedPrawn
7 ай бұрын
Bottom and side are intake (reverse blade), top and rear are exhaust
@sizzly_xd5698
7 ай бұрын
@@TheProvokedPrawn thank you just ordered the case and gonna be here in a week :)
@TheProvokedPrawn
7 ай бұрын
@@sizzly_xd5698 enjoy
@JoliHomes
8 ай бұрын
Hello thank you for the video. Reference to the TL LCD fans will not be compatible with the Infinity controller. Would you have any links to that? I ordered 4 TL LCD Reverse fans as triple packs are hard to find, therefore I dont have the controller for this model. Looking forward to hear from you. Thankyou
@TheProvokedPrawn
8 ай бұрын
I asked Lian Li directly about it. You can try but I haven't. So I can't speak from personal experience but obviously the TL fans are more complex than the Infinity fans so the controller technology may be different
@sibzy1
8 ай бұрын
I had the exact same issue today on mine, couldn't get hold of a triple pack for reverse blade so purchased them individually. The issue being, you can't get the specific LCD controller separately which is a major oversight from Lian Li. I returned my individual reverse bladed LCD fans and went for an exhaust triple pack instead to get the controller. Not what I wanted in terms of air flow, but my pc has been out of action for 2 weeks now and I'm clucking to game 😂
@Kaiser187
8 ай бұрын
That AIO hose placement gives me OCD just looking at it.
@TheProvokedPrawn
8 ай бұрын
The hoses have adjustable tips on the rad end, so you can turn them and do better than me 😜
@oTheDucky89o
8 ай бұрын
Hi, this is my first time building my own rig.. Do you know if it's okay to guild a rig in top of a marble or ceramic table?
@TheProvokedPrawn
8 ай бұрын
Sure. If you're careful www.wikihow.com/Ground-Yourself-to-Avoid-Destroying-a-Computer-with-Electrostatic-Discharge
@tycoonmaster0909
8 ай бұрын
Does anyone know if lian li has intentions of releasing reverse 140mm infinity fans? I’d love to put them is this case…
@TheProvokedPrawn
8 ай бұрын
I believe it's in the works. Last I heard it was "early" 2024. But not sure when.
@leagueaddict8357
8 ай бұрын
I made a new build, in the NZXT H9 flow, I plugged most fans into a corsair rgb hub, think commander pro? but, the other 2 fans that I plugged into the mobo aren't giving RGB so I ordered the commander core XT which is different from the regular commander core, but if I plug the 2 fans into that and just use SATA that should work for the RGB right?
@TheProvokedPrawn
8 ай бұрын
If you have Corsair fans this should help kzitem.info/news/bejne/y6yOqZaksl-EqKw
@ROB-ew6wg
8 ай бұрын
If I got the o11 vision and had a Nzxt kraken 360, would I be able to use that on the back but replace the fans as Lian li tl lcd fans? Goal is to have 3 lcd fans in the back while having kraken lcd on cpu. But I have no idea if this is possible with wiring and controllers compatibility?
@TheProvokedPrawn
8 ай бұрын
Yeah. Just do what I did. Remember the port you connected the rad fans too and then set them up in l connect to respond to CPU temp. Connect the kraken pump to AIO Pump or CPU fan and just leave the fan connectors empty. Use the sata power for the pump though
@ROB-ew6wg
8 ай бұрын
@@TheProvokedPrawn thank you kind sir! I haven’t started building yet but about to press the button on buying the items. In your opinion, the o11 vision or the evo rgb?
@TheProvokedPrawn
8 ай бұрын
@@ROB-ew6wg Evo RGB. Better airflow.
@ROB-ew6wg
8 ай бұрын
@@TheProvokedPrawn thank you again! That sealed the deal. Cheers from America!
@Voltomess
2 ай бұрын
You need more hard drives? someone please give him more!!!
@TheProvokedPrawn
2 ай бұрын
Mostly I'm just demoing how to install them. But I personally use about 4 NVMe, one SSD and a four bay NAS with 24TB of storage 😂
@Bumpyfn250
8 ай бұрын
W
@andrewmarku3987
5 ай бұрын
360 rad in top and low mod mb... Wtf??
@injections
6 ай бұрын
hey prawn, i bought these fans but as you can see at 43:01 your top fans have their own little cycle while the side ones have the red running along the full perimeter. mine are doing this too and i cant find a way to make the red run along the perimeter on both sets of fans. any help?
@sotonglzz
8 ай бұрын
Thank you for this! I'm planning to build with this case in April with a 4090 and 7800x3d. This is going to be my bible.
@TheProvokedPrawn
8 ай бұрын
Thanks for watching and for joining the channel, very kind of you. Hope the build goes well. I've also got this playlist which might have useful nuggets in it - How to build a gaming PC: kzitem.info/door/PLlRFhsGPgCG9yKCHtL2_UnwSGitMqao5z
@Bumpyfn250
8 ай бұрын
I play Fortnite competitive and when i stream my fps is fine but i get a decent amount of inpute delay do you think if i dual PC Stream it would get rid of my input delay and make it feel like im not streaming
@christianzehntner
2 ай бұрын
Hi Provoked! Thank you very much for the video. I've been watching your content for quite a bit on products before I buy them. Did have a question for you however. On the case you mentioned you're able to connect the case lighting to the lian li controller. Could you explain how you go about doing this? I have the case rgb hooked up via the motherboard at the minute, but I'm unsure how to connect to the controller with the cable provided so the lighting can be adjusted via L connect 3. Thank you for your time and your enjoyable content!
@milenkrumov6579
5 ай бұрын
Hello everyone.. I started building a computer but ran into a problem, if you can call it that... I have a Lian Li O11 Dynamic EVO RGB CASE and Lian Li UNI FAN SL-INF 140mm I have a technical question regarding the installation of 3 X 140mm fans which are on the front, i.e. to the right of the motherboard...I can't screw more than 8 screws there because the upright bracket is a bit short. ..On the first and last fan, the upper screws, which are 2 each, have nowhere to screw....The fans I watched a video in which 3 fans of 120 mm fit perfectly and all 12 screws are screwed to them... But for 3 fans of 140 mm something is not right... Does anyone know where I'm going wrong?
@milanhron6765
7 ай бұрын
I have a similar setup, but I don't know how to connect the cables. Anybody got any ideas? O11D EVO RGB + GA II TRINITY with UNI FAN SL-INF + UNI FAN TL LCD Total: 4x 5V ARGB and 3x USB MOBO : 3x 5V ARGB and 2x USB -> Will be hubs working ?
@Divyam4070
2 ай бұрын
12:20 did u put 5 ssd in the motherboard??
@robinenbernhard
7 ай бұрын
wish fans where 120x120 and not 120x124. it wil not fit in some case als rear fan like my NZXT H9
@saipabbala7103
3 ай бұрын
can we intake fresh air from top and bottom and exhaust from side and rear? coz if the radiator is exaust it if feeding on hot air from GPU.
Пікірлер: 255