Step by step guide for using the Smithers script on a Mr Burns vertical RetroPie image on an Arcade1Up vertical mod.
This is for changing the Mr Burns vertical Retropie image that can be found on Arcade Punks to work in Emulation Station and support favorites rather than making you scroll through 800 games to find what you want. It also optimizes the Carbon theme for vertical screens and sets the screen orientation properly for an Arcade1Up cab so that you do not need to physically rotate it. It assumes you have already modded your cab to use a Raspberry Pi and downloaded the Mr Burns image and burned that image to an SD card.
It as easy as dragging one file to the boot partition, unzipping, and then running a couple commands with a keyboard.
Get the script from: hammertechnolog...
Flash Mr Burns, remove and then re-insert the card.
Copy the zip to the boot partition.
Unzip it by double clicking on it.
Eject the SD card, put it in your Raspberry Pi, after booting and assigning buttons, exit to the command prompt.
Then type:
cd /boot/smithers_v1.6 (or the directory name you used)
sudo chmod +x smithers.sh
sudo ./smithers.sh
It will run and reboot when done! There is also a readme file inside the zip.
Visit my Facebook page at: / texashomearcadeservices for more modding information.
Негізгі бет Using the Smithers script on the Mr Burns RetroPie image
Пікірлер: 62