This is a parent. Thank you for video, Great help!!
@fredmac1000
3 ай бұрын
Thank you 🙏
@gcasillas1980
9 жыл бұрын
Thank you for this video!
@samvsound
5 жыл бұрын
Thanks for the easy to understand video... How do I add another entry/exit door to the system. Currently, its just my front door, and I want to be able to leave / enter through my back door.
@kimgeurts7004
3 жыл бұрын
if I get a new replacement window sensor, do I need to do anything with this panel also, or am I good
@suyoungjang9461
3 жыл бұрын
I have a same keypad. Recently zone 6 light been on which indicates basement. But all windows&door are closed. How can I fix or turn off light from blinking?
@Xx_eeveemocha_xX
2 жыл бұрын
I just bought the house and I didn’t have any code , so how can I disarm if the alarm is on ?
@orihillel4210
5 жыл бұрын
The alarm card for this sample stopped working suddenly, from where I can order a new one from Israel.
@zohazoah8481
4 ай бұрын
never heard of israel, you’re most likely talking about occupied palestine
@MWD1991
3 жыл бұрын
I’m trying to replace a saw sensor that is corroded using my NX-1324 Keypad / NX4 System. When I press *8, all of the lights begin to flash. When I enter 9713, they continue to flash. I’m assuming that means that the programming code is wrong. I do however know the master code. Could you explain how I can add/replace the sensor? Thank you.
@mangochampagnelasssi9028
Ай бұрын
My issue is that I have a service light on that flashes orange but no other light no power nothing light. A bit ago we got robbed and they ripped the panel off
@framejia123
9 жыл бұрын
I made the mistake of pressing the stay button and then open the front door to see if it work. well....it did. The problem is I don't know the code since I just moved to this house and the alarm was disconnected. Any ideas? I was thinking about getting a new board since this one might not have a chance without a the original code. I bought a foreclosure so no chance to ask the old owner.
@Rolhypno
7 жыл бұрын
Was wondering how you resolved this issue. I have the exact same problem...
@Xx_eeveemocha_xX
2 жыл бұрын
Did you guys fix the problem? I need help too
@hotrodhotrod-wc3bu
5 жыл бұрын
hey i have a 15 year old networx alarm system .but the problem is im not hooked up to a monitor system or land line or computer .all i want to do is set my alarm so when i leave or am at home if someone enters my alarm will go off .But asg will not give me the master code how can i reset tje master code m
@MasterOfMinecraft385
Ай бұрын
1234 should be the default master code. If that code doesn’t work then try turning the power off for about 1 minute and turn it back on. Hopefully this works
@JUKE179r
7 жыл бұрын
Thanks!
@Xx_eeveemocha_xX
Жыл бұрын
How can I turn off the alarm when I don’t know the code? The company who install this system is no longer in service… what can I do ??
@MasterOfMinecraft385
Ай бұрын
Try the default master code 1234. If that code doesn’t work then you will have to unplug the ac power and disconnect the backup battery (if it has one) once the alarm powers off try restoring power to the alarm. It should reset to the disarmed state
@lam03v00j
7 жыл бұрын
Can anyone explain why this guy says at 5:30 when entering a new user to the system he says, and I quote; "now we can go ahead and enter in the FOUR DIGIT number for user two", and then he proceeds to enter in a FIVE digit number? He makes no attempt to explain this.
@MasterOfMinecraft385
Ай бұрын
That is weird because my grandmothers alarm is the nx4 and every user code needs 4 digit codes. I wonder if you can set a 5 digit code on the nx6 and he meant to say 5.
@mikeb4722
4 жыл бұрын
dont have the master code to even change it so how do i reset it
@davidmcintyre9138
5 жыл бұрын
WE HAVE THE CHIME BUTTON ON OUR SYSTEM AND I WISH TO TURN IT OFF FOR GOOD ,CAN I JUST PRESS THE CHIME BUTTON AND THAT WILL NOT SET THE ALLARM OFF
@MasterOfMinecraft385
Ай бұрын
Turning the chime button off means that when you open a door/window the chime won’t sound. It shouldn’t affect anything with arming or disarming the system
@kennethvoocheehow9452
6 жыл бұрын
can anyone teach how to set phone number for NX-1448E thank you.
@jadebradley3188
7 жыл бұрын
how do i wire it
@hotrodhotrod-wc3bu
5 жыл бұрын
its a ge
@maiag7905
8 жыл бұрын
How do you turn the service light off on the key pad?
@AJforce92
2 жыл бұрын
Did you ever find this out? I have the same issue
@Matt-zs6qx
9 жыл бұрын
When i depress the stay button twice it does not activate the instant feature, any idea why or what can by done to remedy this?
Пікірлер: 31