Nice dude! I bought a Built by Vanny BnF and I'm going to drop all the components I side this new Vannystyle Pro baby! Cheers yo!
@Smagsfpv
11 ай бұрын
At about 8:07 in you did like a back flip up the building, still continued to go up,backwards and then did like a Matty under the building. That was dope.
@deroskar
11 ай бұрын
Dammn this video hits really nice! I font watch as much fpv content anymore but i alwys love the raw rips! Gotta get this frame somewhere in germany haha
@DanZfpv
11 ай бұрын
Vielen Dank für die netten Worte. I appreciate it. As of now Vannystyle.com offers international shipping from the US. BUT, having a European distributor is in the works. Wanna make it happen for all the incredible rippers that are out there. I wanna rip Europe so bad.
@MurdersFPV
11 ай бұрын
Excellent vid! The "what's up buddeeh" had me dying.
@zacfpv
11 ай бұрын
The coolest socks I've ever seen 😂
@DanZfpv
11 ай бұрын
It’s my sisters face. She gave them to me as a present.
@zacfpv
11 ай бұрын
@@DanZfpv She was loving 😍
@monicazabinski4987
11 ай бұрын
That would have been my actual expression if I was there.
@JDDupuy
10 ай бұрын
Mine arrives Friday. Thanks so much for the 3D Prints. And thanks for taking the time to do this video. New Sub!
@DanZfpv
10 ай бұрын
Cheers! I hope you enjoy it as much as I do!
@JDDupuy
10 ай бұрын
Just finished the frame following your video. Excellent step by step build which has a few new twisst on construction I had not seen before. I have some new AOS motors and an F7 flight controller with ELRS receiver to go on board. Avatar V2 VTX with the Pro camera.Thanks again!@@DanZfpv
@parkswreckfpv3547
11 ай бұрын
That durability test looked way better than it sounded 😂🔥 awesome vid
@DanZfpv
11 ай бұрын
Cheers. Thanks dood. It was fun ripping with ya.
@DRONEPOISON
10 ай бұрын
Looks like a solid quad, need to get me one to drop some Poison on. You slaughtered that spot Z
@francecorre
11 ай бұрын
🔥🔥🔥🔥
@baggszilla
10 ай бұрын
DanZ is a straight ripper!!!
@phonic6161
11 ай бұрын
Good rip.
@bandoslayer
11 ай бұрын
Polish "Maluch" Car... he would like to fly too ;)
@DanZfpv
11 ай бұрын
It’s my dream to have a Maluch here in the States. And I want it on a monster truck chassis.
@FlyZoneFpv
11 ай бұрын
Awesome assembly video my dude . Dan more toungue next time 😂😂😂🙌
@RemcosFPV
10 ай бұрын
Dude ... that was sick
@MrBlonde5k1
9 ай бұрын
Sick flying!
@Oxtailgraavy2023
7 ай бұрын
Mine gets delivered today... Im itching to throw out that speedy frame
@Todd_G_FPV
28 күн бұрын
Ill take the speedybee frame lol
@MikeDuranFPV
11 ай бұрын
love it my dudeeeeeeeeeee
@RCRitterFPV
11 ай бұрын
boom boom done... there ya go...
@CaptainKazi
11 ай бұрын
That pack was metnal dude!
@Smagsfpv
8 ай бұрын
@Dan Z The frame comes with regular screws and titanium screws,what are the titanium screws for? I'm not sure which ones to use for what. Thanks.
@austinspired
11 ай бұрын
Dude our benches look strangely alike lol
@DanZfpv
11 ай бұрын
I’ve been sneaking in and shooting videos while you sleep. 🤫
@FPZzzz
8 ай бұрын
Some real nice flying! What are some of the other components of your build may I ask? Flight stack and motors? Your using the built in ELRS on the Boxer?
@DanZfpv
8 ай бұрын
Thanks! For my builds currently I'm using the following: *VSPro Frame *Gemfan Sbang Props *Diatone Mamba F722 Stack w/50A BL32 ESC or *Aikon F7 V2 FC w/Tmotor 50A BL32 ESC (So far I feel like stacks are pretty interchangeable as long as they're quality) *ELRS Receiver protocol *DJI O3 *Motors I'm in flux on. Historically it's been the Xing2's on 1950KV. But lately I have a build with the Slatts from TMotor and that is my favorite flying proxy quad.
@FPZzzz
8 ай бұрын
Thanks so much for the feed back. I was having trouble with the ELRS and the SB F405 fc with BLS esc. I was thinking that this stack is not very compatible with the ELRS Boxer. I think I should pick up a more up to date F7 BL32 stack. Any thoughts? @@DanZfpv
@DanZfpv
8 ай бұрын
@@FPZzzz I feel like you should be able to use it just fine on that stack. I will say the ELRS does not have a super friendly/easy user experience. You have to be certain that your settings are correct. I also did have an F7 FC that would not work proper on the recommended UART. When I changed the UART everything started working again. My recommendation is to go over everything again. Make sure everything is working as it should.
@FPZzzz
8 ай бұрын
I got it working on uart2 which is the only uart it will work on but the tune is so bad. Motors make grinding sounds. I moved the master slider in BF pids. I quited them down but now it flys so bad. This same stack and build flew no problem with the DJI2 controller and link but I wanted the Boxer up grade. Night and day difference with the boxer. Hoping to find a good match. @@DanZfpv
@nappyfpv
11 ай бұрын
It was soooo easy except those 2 front camera cage “keys “
@DanZfpv
11 ай бұрын
I’ve heard this a couple times. It’s what gave me the idea to make the video.
@nappyfpv
11 ай бұрын
@@DanZfpv good idea. I thought it was an arm key like the og Vanny or something.
@heavenxnorxhell
11 ай бұрын
Dang that thing looks like it flies smooth!! What parts did you chuck in it?
@DanZfpv
11 ай бұрын
ESC/FC are pretty interchangeable from rig to rig. I’m not particularly precious about it. I run BF 4.3 and blheli 32 ESC’s that are north of 50amp rated(Foxeer reaper, Tmotor Pacer, or Mamba). My go to motors are the xing2 2207 @ 1950kv. For more “budget” motors. The Tmotor Velox v2’s have been working pretty well for me. Other than that. It’s a culmination of years of trying to not suck as much as I do.
@heavenxnorxhell
11 ай бұрын
@@DanZfpv Thank you very much!
@allanfolkes6019
3 ай бұрын
I would love to build on but I wouldn't be able to afford it 😢 from Trinidad and money here is 7 to 1 and at 138. For just a frame no tpu just frame stand offs and screws. By the time that frame and parts get to me I'd spent like 6000. TT dollars if anyone wanna send me a squashed x that would be the only way I could have one honestly
@Rocketfpv
11 ай бұрын
Great video!! Does it come with the 3d prints ?
@DanZfpv
11 ай бұрын
It does come with a couple of basic pieces. Camera Cage mount and the tabbed GoPro mount thing. If you’re in need of parts I’ve posted a variety on thingiverse: www.thingiverse.com/thing:6237294
@Rocketfpv
11 ай бұрын
Thank you so much .
@DGFPV-fx4oe
7 ай бұрын
what are some good props you would recommend for it
@DanZfpv
7 ай бұрын
Depends on a few different factors. If you’re flying a session or action 2. I’d recommend something like the Gemfan Sbang or Gemfan 4937’s. If you’re on a Full-size GoPro or Mini I’d recommend something like the Gemfan Freestyle4S.
@DGFPV-fx4oe
7 ай бұрын
Awesome thanks! I have the action 2
@willbrown8928
11 ай бұрын
I still need to upgrade but damnit I'm broke lololol
@DanZfpv
11 ай бұрын
Sounds like you have a hobby that is an eternal flaming money pit. I’ve got one of those too.
Пікірлер: 55