HOW TO FIT A CARRON BATHROOMS BATH
Measure:
Measure the space in your bathroom and choose a bath that fits best. At Carron Bathrooms we have a wide range of baths in all shapes and sizes to best fit in your bathroom.
Choose:
If you need help choosing your perfect bath, use our bath guide at www.carronbathrooms.com to help you identify which baths could transform your bathroom.
--------------------------
Fitting Your Bath:
In this video our expert fitting team will show you how to fit a Quantum Integra, Carron Bathrooms bath expertly in your own bathroom.
What you’ll need:
- Carron Bathrooms Bath
- Tape Measure
- Pencil
- Ruler
- 900m Spirit Level
- Waste
- Screwdriver
- Power Drill
- Spanner
--------------------------
Step 1
Remove all packing but keep the polythene in place to protect the bath.
Step 2
Turn the bath upside down. We recommend doing this with the help of a friend to keep your bath in pristine condition.
Step 3
Check the bath for any damage, scrapes or dents. All Carron Bathrooms baths are finished by hand and Made in Britain
Step 4
Lay out your Carron Bathrooms fitting kit. Check all parts are present and in tact.
All our baths come with a fitting kit as standard. Our Quantum Integra Fitting Kit contains:
- Instruction Booklet
- 12 x Wall Plugs
- 16 x Pozidrive Screws
- 4 x Threaded Rods (Incl 3 nuts per rod)
- 4 x Clip-on feet
- 4 x Plastic Legs
- 3 x Wall Brackets
- 2 x Channels
Note: Kit Contents Vary by Model
Step 5
Your bath should be upside down. On the bottom of the bath mark the channel positions.
Step 6
Carron Tip: Our bath screws have pozi heads. Remember to set the correct torque level on your drill as the wrong setting could damage the bath.
Screw in the channels, fit the threaded rods and the plastic legs. Tighten the bolts and click on the feet using your hand
Step 7
Check the height of the panel, making sure it’s level and measure in the height for the bath edge. For the Carron Bathrooms Quantum Integra this bath is 515mm.
Carron Tip: Measuring and leveling the bath before pulling it in position will make the fitting process easier.
Step 8
Drill pilot holes and screw in the panel clips. Remove the polythene and give the bath a final click
Step 9
Fit the waste according to the manufacturers instructions and you’re now ready to fit the bath.
-----------------------
Watch this video and find out how easy the fitting can be. All Carron Bathrooms baths come with a fit kit as standard. For more information on any of our baths please contact of our team using this contact form or by calling us direct on +44 (0)1324 638407.
Негізгі бет Video: How to fit a Carron Bathrooms bath - Quantum Integra
Пікірлер: 1