Mike Blake I'm from ny too. highly modified 03 monte. long island ny trying to find a good tuner. the first place i went to is closed and the second guy was horrible. anybody you recommend?
@SG_Acid
9 жыл бұрын
Thanks, Helped me with my supercharged Bonneville.
@massivesaint1415
5 жыл бұрын
I was just gunna say the same thing
@frankthatank6716
10 жыл бұрын
Nice cant wait to put my 60s in
@Evillt1
4 жыл бұрын
Really good video! Thank you!
@rcharne
6 жыл бұрын
Great video! You covered everything well!
@BassManBobBassCovers
Жыл бұрын
That's crazy a bad injector would cause a stall. I usually try to check the ohms once and a while too.
@arnoldmoreno6518
6 жыл бұрын
Do you pull a fuse out to depressurize the fuel line?
@BakariHernandez
9 жыл бұрын
Good video man, real easy job. Thought it was harder then that. But with upgrade do you have to reprogram the computer?
@WBodyTech
9 жыл бұрын
Bakari Hernandez Yes you will need a tune, find someone that has HP Tuner or DHP tuner
@BakariHernandez
9 жыл бұрын
Thanks..
@Kushdaddylove
6 жыл бұрын
? Will the zzp 1.0 upgraded ecu be enough or tune also? Thanks man
@snutmeez
5 жыл бұрын
@@Kushdaddylove You just have to let ZZP know what modifications you have before you get the PCM so they tune it for you.
@jri1ez
5 жыл бұрын
Thanks for the videos guys. I got an 02 Regal GS, plugs keep getting foul and have really bad starting issues and misfires. I have done EVERYTHING except injectors
@WBodyTech
5 жыл бұрын
I'm glad we can help and feel free to join our group on facebook.com/groups/1445257962355080/
@matthewhartman950
4 жыл бұрын
Where did you get the injectors from? I have been looking online at different places but I haven't had much luck finding something less than $400.
@FireEater
6 жыл бұрын
Great video bet you could do it with your eyes closed. Thanks for posting it.
@RobertOrtega
6 жыл бұрын
Mike Blake some people need videos on brushing teeth lol.
@jessiewing8199
8 жыл бұрын
with stock fuel injectors do u still need tune?
@Basskilz15
Жыл бұрын
Did you notice any difference after repalcing the 33# stock injecters for the 42# ones? And did you get a pcm update from zzp?
@WBodyTech
Жыл бұрын
The car ran a 13 in the 1/4 later that evening, We will never use a ZZP tune in our vehicles, we do our own tunes.
@IceTrey98c
5 жыл бұрын
Ok.. so can these run with the stock fuel pump and fuel pressure regulator? Or do I need to upgrade those to run the 45lbs?
@lawrence1986ify
2 жыл бұрын
the stock pump can hold 300hp if its a good pump with Stock PR even if you go zzp 380 you can still run FFPR now like a Walbro 450 you would need aftermarket and just grab the 42lbs injectors and install them like he is you need a tune for sure dhp or hp can do it
@prestonboling1427
2 жыл бұрын
are you using the 2bar map? i have a top swap as well but was told to keep the same map sensor and as of now it just sitting on the top of the blower
@WBodyTech
2 жыл бұрын
You have to change your map as well. You can’t use the N/A map unless you want issues.
@prestonboling1427
2 жыл бұрын
@@WBodyTech ah man i may have to find someone else's that can tune in the 2bar. i planned on doing that in the first place but the guy over at sinister performance told me to keep the na map sensor
@WBodyTech
2 жыл бұрын
@@prestonboling1427 you don't have to tune the map, you need a stock GTP tune and modify for what you need or leave it stock just to drive the car.
@Dreadpiraterobbers
7 жыл бұрын
Quick Question, are these the same injectors as the 3.8 with no supercharger?
@jerryhanson3903
4 жыл бұрын
I have a supercharged series 2 and i need a fuel pump at 51 psi, fuel pressure regulator at 51 psi, and fuel injectors at 51. I went to the parts store and couldn't get any information about most of the parts so I went to the shop that works on my car and they said when you buy parts buy them from the dealership. They said parts stores even though it says on their computer the part fits your car alot of the time it doesn't depending on the part and the car. Like for instance I bought a fuel pump from a popular parts store, it said on the computer it fit my car But it doesn't, the fuel pressure is off and now it's throwing out a lean code, the psi didn't mach the ACDelco part i should have got. So don't make a mistake like I did, if your going to buy aftermarket parts at least call the dealership first and get one OEM info first then see if it matches the aftermarket part
@tonyszman1
8 жыл бұрын
what vehicle did you get the injectors out of? iv got a 97 gtp
@apr86usa
8 жыл бұрын
they are out of a ford svt cobra or ford svt lighting pick up. their 42.5lbs
@B-S1999
3 жыл бұрын
On my 06 Pontiac grand prix NA on of the fuel rail bolts broke so I only have 3 of them holding it down, will that cause a problem or will 3 nuts be good enough
@WBodyTech
3 жыл бұрын
you're going to want to try and remove that stud and replace it. It may be ok for now but eventually it will cause a vacuum leak.
@B-S1999
3 жыл бұрын
@@WBodyTech I know I gotta extract the stud but it's small and its broke flush off and dont wanna destroy anything. You got any pointers or ideas
@WBodyTech
3 жыл бұрын
@@B-S1999 Replace the intake manifold if you cannot get the stud out. you can get those all day at the junk yard and it would be a good time to upgrade the gaskets to the metal AC Delco 89017825 Ones if you haven't yet.
@B-S1999
3 жыл бұрын
@@WBodyTech just replaced all that, that's how I snapped the stud off for the fuel rail
@jerriabarton
4 жыл бұрын
? What all can I do to make my 03 gp gtp fast.
@WBodyTech
4 жыл бұрын
Invest in a good engine build, avoid shady places that offer cheap prices and cheap tunes.
@lilredd1991able
7 жыл бұрын
Don't you have to depressurize the fuel line first?
@RobertOrtega
7 жыл бұрын
Two3 DoubleH yes, always and remove the negative battery cable before messing with anything electrical or fuel related.
@lilredd1991able
7 жыл бұрын
Robert Ortega do you know how to depressurize the line??
@RobertOrtega
7 жыл бұрын
***** use a towel and a small screwdriver, carefully depress the release valve into the towel till no more fuel is in the line.
@NordicChilll
6 жыл бұрын
Pull injector relay and crank the engine for 5 seconds to decompress the fuel line.
Пікірлер: 46