No more Cali emissions No more egr You’re like a free man now😂😂
@WBodyTech
4 жыл бұрын
Free as a bird!
@truevision004
7 жыл бұрын
well I tried to tackle this project based off this install alone and I encountered some huge issues that they didn't really get into. they skipped the part of fighting with the trans dipstick all together. then these headers have a clearance issue with the O2 sensor before the cat near the firewall. also they don't tell you you have to put the trans dipstick back in before the cross over pipe. In this video he already had work done to his cat and the flange bolts were easy to unbolt, but in reality you may be like me and get stuck with bolts that have welded themselves on. I had to grind them off now having to figure out how to put holes back in flange in order to bolt up new down pipe. love this video but just warning everyone....it's like they said 5 hours or more based on NO complications.
@tatialo37
3 жыл бұрын
I've always liked the 3800! Esp in a pontiac or chevy!
@AyeSupQT
4 жыл бұрын
Them Osiris tho. Feels like high school again man
@Highlander1432
4 жыл бұрын
Very cool video. Seems like an all day job even for experienced wrenchers.
@rudygarcia9170
7 жыл бұрын
great video, very detailed. i just ordered my SDs headers this morning. what size clamps will i need to replace the ubolts they come with?
@AJ-ox2gb
4 жыл бұрын
Thanks for the video. Looking forward to the new header video.
@WBodyTech
4 жыл бұрын
This is a very old video and at the time we were just showing quick bits, not the how-to videos that we are currently recording now. A new header video will come soon.
@bryanscarz7457
2 жыл бұрын
Love that color
@dwighthicks53
7 жыл бұрын
I have a 1996 Buick Riviera Supercharged where I'm putting a set of these on. When going catless, will I throw a service engine code? Or will I have to get it tuned for the converter not being there.
@zacharyjoseph4960
10 жыл бұрын
What other mods were done to this besides, of course, the headers you installed? Seems damn quick!
@thebubblemeister
9 жыл бұрын
it looks like a smaller pulley, cai, and the motor mounts.
@jasonpurcell9897
8 жыл бұрын
will day fit on 2004 grand prix gtp speed daddy header
@prestonboling1427
2 жыл бұрын
how the hell did you get to the bolt in the rear manifold closest to the egr? i cannot get a socket on it no matter what i try
@Pontiacs4life
10 жыл бұрын
What's the easiest way to take off the rear header?
@VQ_rafa
3 жыл бұрын
whats all done to the gtp smaller pully intake and headers?? what else
@braddishner8597
4 жыл бұрын
Is this car lowered? I'm buying the zzp lowering springs but I've been told that they will make my headers hit the fan...
@conradtestamark6142
6 жыл бұрын
@WBodyTech! if I want to change the 3800 to a 4800-5500 or a5900? how can that be done. and also can i revers the engine from sideways to Lenthway?and if the is front wheel drive can that also be revers, did you ever done any modification like that before.
@AZTechLabs
10 жыл бұрын
Deja Vu, nice vid. thanks guys
@Numbfoot
10 жыл бұрын
How long did it take to install these? I have the same set and you all made this look easier than it seems.
@WBodyTech
10 жыл бұрын
Took us about 5 hours give or take with breaks.
@ebonbaum8632
3 жыл бұрын
Definitely watching this later
@coreyconner8418
9 жыл бұрын
Did you keep the speed daddy flex or get the zzp?
@rodneysanchez1379
4 жыл бұрын
How did you get cross over bend to fit ?????
@jakeymon22
10 жыл бұрын
Half way through this video I realized that I now own that snout and pulley haha
@jerriabarton
4 жыл бұрын
I have a 03 gp gtp im trying do the same thing
@smg7244
3 жыл бұрын
Hey just for next time you do one of these its alot easier to get the header in from the bottom it slides right in😉
@manwell8082
3 жыл бұрын
Is that your power steering pump??
@BackyardBandits
10 жыл бұрын
my 3.1 cam right out after i removed the bolt that holds it into the block
@MagicAce711
10 жыл бұрын
Did you guys have to do any modding or welding or did these just bolt directly onto the OE exhaust?
@WBodyTech
10 жыл бұрын
We bought them as is but we do other vehicle modifications on the side.
@cocodog85
5 жыл бұрын
why do you want shorty engine position dog bones? what are the advantages over stock?
@Doing150s
5 жыл бұрын
Mainly clearance for headers. Also it positions the motor closer to the front of car and better for take offs and also less pressure on CV axles when car is lowered
@dougbarnhart4947
Жыл бұрын
Use Doug Thorley headers
@Kibbl3znBitz
5 жыл бұрын
Do you know what size socket I should use on the exhaust manifold down pipe?
@WBodyTech
5 жыл бұрын
Depends , some are 13mm and others are 15mm.
@luispina317
4 жыл бұрын
Did you notice a big power increase.
@504YoungCity
6 жыл бұрын
Whr did u get the pipe couplers from...and what size
@apr86usa
6 жыл бұрын
Midnyt Customs you can get those from a local parts store their called band clamps. They are in long black and red boxes or get them@zzp, I still recommend silicone in the connections in the pipes themselves preffered high temp rtv. These headers require 2.25" (x2) and 3" (x2) band clamps.
@kennycreager9850
9 жыл бұрын
I got stuck on the rear header. I was told to drop the subframe. Will that help
@pjboulden9
5 жыл бұрын
No
@illyrian4life
8 жыл бұрын
how on earth did you install the rear header? i have no room. the video did not show the actual install.
@collinklitz7434
4 жыл бұрын
I have looked at one on a lift and it seems that installing the rear header from underneath the car may work better.
@ethanwpope99
6 жыл бұрын
Is this pretty much the same process to put headers on a supercharged Bonneville? I've been hearing that if I'm going to put headers on I'm going to need to pull my engine in order to do so. Thanks in advance.
@WBodyTech
6 жыл бұрын
Ethan Pope it all comes down to clearance, it's the same engine, supercharged or NA. I'm sure you can make them fit, what year is the Bonneville?
@ethanwpope99
6 жыл бұрын
2002, not too serious about headers quite yet but just trying to get a little info before hand so I know what I'm dealing with
@WBodyTech
6 жыл бұрын
Ethan Pope I would think you would have more clearance being a G Body and all. Pulling the engine for headers sounds a bit over the top of you ask me.
@ethanwpope99
6 жыл бұрын
WBodyTech That's what I was thinking too. It's hard to find someone that's actually helpful in the forums nowadays haha I'll do some more research and see what I can come up with. Thanks for your input though man, appreciate it.
@american16
6 жыл бұрын
Sounds like power steering was low also when you started the car
@apr86usa
6 жыл бұрын
Mike W I always thought the pump was bad, believe it or not that was a bad idler pulley on the supercharger belt.
@repnatl
8 жыл бұрын
Still running a stock pulley seems really slow?
@sellinsizzurp
5 жыл бұрын
That was a quick LITTLE burnout boy
@Siviqs
3 жыл бұрын
Do you have a link to where you bought the headers?
@WBodyTech
3 жыл бұрын
I don't remember where we got those, it's been so long. However, a google search will turn them up, I've seen them on eBay and even Walmart!
@antonwilliams4370
5 жыл бұрын
Can I get this install in my 97 Grand Prix 3800. I don't got the supercharger
@Adamz678
5 жыл бұрын
yes you can, but the hastle isn't worth it. best off to leave that alone, even with a super 38 I'd be on the fence unless I was into modding super 38s and it was on the end of it's bucket list to just bring KR's down.
@Scrwhead_louieGSVic
6 жыл бұрын
What kind of downpipe is that from cause zzp said there dowpipes don't fit the speed daddy headers?
@cameronmarshall9918
6 жыл бұрын
Scr3whead_louie2004GS Vic just seen one of your vids earlier lol
@JasonBohl
8 жыл бұрын
What size was seal clamps did u use on the crossover pipe? I bought 2.5 but they seem too big and I have a bad exhaust leak there.
@vaughnm0156
7 жыл бұрын
2.25 i believe
@goofyexponent
7 жыл бұрын
Jason Bohl downpipe is 3". crossover is 2.25"
@gilbertwheeler160
7 жыл бұрын
Frank Castle so how many of what size ... I was told I need 3 ... is that 2 -2 1/4 and 1 - 3? or is it only 1 of each
@goofyexponent
7 жыл бұрын
Two 2.25" and two 3" is what i needed
@gilbertwheeler160
7 жыл бұрын
Frank Castle thank you ... I put in the order
@lawadm1
5 жыл бұрын
You skipped over shoving the new rear header down behind the engine.
@saucegucci1987
2 жыл бұрын
Does all gp make that whirring noise?
@WBodyTech
2 жыл бұрын
The supercharged ones do.
@subwayguy1610
8 жыл бұрын
What makes that whine noise when you first start it up, towards the end of the video?
@TheGBprogamer
7 жыл бұрын
Power steering fluid is low
@reddfigga80
5 жыл бұрын
Lmmfao it's supercharged man not low on ps fluid
@braddishner8597
4 жыл бұрын
Lol
@Hoodie-xj2iv
3 жыл бұрын
@@reddfigga80 you’re dumb, sc shouldn’t sound like that. Unless it’s got bad bearings. Literal dumbass
@thebigtarver
10 жыл бұрын
need help i have a 2002 gtp getting poor fuel milage even after cat i think there a problem with either map sensor or fuel pump
@WBodyTech
10 жыл бұрын
Have you done any mods to it?
@mrincredible5492
5 жыл бұрын
Trouble codes?
@jerriabarton
4 жыл бұрын
Question how long did it take you to install that
@WBodyTech
4 жыл бұрын
Few hours.
@melissascribner3160
6 жыл бұрын
I’m trying to get the manifold off the motor. I cannot reach the bolts. Any suggestions?
@WBodyTech
6 жыл бұрын
Melissa Scribner remove the top engine mounts, get a rachet strap and use it to pull and hold the engine forward. It will give you plenty of room to get those rear bolts.
@melissascribner3160
6 жыл бұрын
Ok thank you!
@leslesywilliams4371
5 жыл бұрын
Did you have to modify that crossover pipe? Mines don’t line up
@WBodyTech
5 жыл бұрын
We didn't have to modify the pipes. they fit
@javiermontes3777
4 жыл бұрын
you can send me a link where I can buy everything
@kylielarock3840
4 жыл бұрын
Just an fyi if you havent ordered yet just know alot of them come with issues of the manifold flange being warped from getting hot while welding and you need to have that fixed before instal by either getting a sanding belt machine or whatever its called or sending it out..not all are like this much alot are
@kinggg313
7 жыл бұрын
How did u change ur speedo needle.
@ECKO147
10 ай бұрын
How much more power u get from this mod
@WBodyTech
10 ай бұрын
it was noticeable, we ran a 13 at the track that night lol. idk it was better.
@ECKO147
9 ай бұрын
@@WBodyTech nice I just got the same header need to go slap them on I didn’t get the gasket with mine tho and u did a egr block off
@benwilliams7012
2 жыл бұрын
Would those headers fit a gt
@WBodyTech
2 жыл бұрын
Yes, they will fit any 3800 wbody.
@crzzymnn911
2 жыл бұрын
There's really no reason to do that on an N/A. Reaaon why is because without a blower or turbo you're not going to exceed to the flow capacity of the stock manifolds.
@trevorhonl
5 жыл бұрын
How are these holding up?
@WBodyTech
5 жыл бұрын
We got our money worth but upgraded for tuning purposes.
@trevorhonl
5 жыл бұрын
Should I get a set or just do it right and get a more expensive set?
@zstrode.8953
8 жыл бұрын
What if my throttle body is missing?
@vaughnm0156
7 жыл бұрын
Then you probably don't have a running car.
@mclovin27777
6 жыл бұрын
Thinking about getting these headers for my car, a shop said it would be 450 for install does that sound good and would I need a tune with them, and would they burn out the old cat
@sellinsizzurp
5 жыл бұрын
Diy
@Chevyboyzd
8 жыл бұрын
what size are the crossover clamps?
@mmdinvestments
10 жыл бұрын
What did u do with the dipstick I have a Bonneville ssei 02 but my transmission dipstick is blocking it
@WBodyTech
10 жыл бұрын
We had to order a custom one for the GM 4T60, 4T65, 4L60 & 4L85 Trans, its a flexible dipstick tube.
@benjaminbaird1978
7 жыл бұрын
what did you gain by taking all the emissions shit off
@tuddyjohnson488
4 жыл бұрын
💯💯💯💯💯💯💯💖💖💖💖💖💖💖💖💪💪💪💪
@aaroncastanon7396
7 жыл бұрын
Did yours hang low from the downpipe?
@mistress313
7 жыл бұрын
Aaron Castanon they do hang very low at the flex pipe at the front
@254967conwell
7 жыл бұрын
Kick myself in the ass for not going this route on my 2002 Regal.....have front and rear Plog and 3" downpipe and full catback. I should just trash both Plog and DP and start over. Rear exhaust manifold not nearly as restrictive as the front
@kxngearner698
5 жыл бұрын
The W Body Were Such Great Cars Only Thing I Hate Is That They Were FWD Especially The 98-03 Grand Prix Coupe & 2000-2007 Monte Carlo & Also The 2004-2008 Grand Prix 2006-2016 Impala FWD Ruins Everything
@leslesywilliams4371
5 жыл бұрын
The rear header suck ass I cannot get it unbolted
@joeyfoureyes98
4 жыл бұрын
Speed Daddy headers are trash. Had them on my GtP and they weren't bent right from the factory and didn't seal on the front head. Also, the o2 sensor port is aimed at the firewall so you have to bash it in to get the o2 sensor in.
@Andrew-bv6qc
11 ай бұрын
Anyone wanting to do this don’t, I installed these on my 04 intimidator and they suck the v band is built like garbage and the u bolts/clamps do nothing but leak just go with zzp power logs or your factory exhaust
@WBodyTech
11 ай бұрын
Never had any issues with this and we did this back in 2014. Anyone that knows better won’t use the ubolts. Sorry you had issues with your install but I refuse to promote zzp trash here.
@Andrew-bv6qc
9 ай бұрын
@@WBodyTechafter looking into it more it wasn’t the u bolts that were leaking. My egr was leaking and no matter what I did the v band would leak I feel like it was just machined poorly
@WBodyTech
9 ай бұрын
I've heard from others that the quality of these headers has gone down since I posted this video. @@Andrew-bv6qc
@user-sh1yv3gp6p
10 жыл бұрын
These cars are so terrible to work on
@ninjaryohazuka
4 жыл бұрын
They are not. I own a 2000 Pontiac Grand Prix and repair and modify it. There's plenty of room in the engine bay and it's a pushrod engine. There should even be mechanics out there who will tell you the same thing.
Пікірлер: 117