A lot of people say that Spydercos are ugly but to me I think they look great. I think it's the functionality and the feeling of quality that makes them look good to me. It would be kind of nice if Spyderco would do what Hoag does and include a high quality zipper pouch. That would kind of off set the box and somewhat high price.
@MattRoseKnives
2 жыл бұрын
To each their own!
@lenaguilar501
3 жыл бұрын
Nice review and comparisons, Sir. I just bought a spanking new PM2 a few minutes ago. I was torn among the Benchmade 940, PM2, and the Griptilian. Since I already have a Kershaw Funxion EMT, I needed a flat blade; thus, the PM2. I spent 3 hours at the store comparing various knives. I think I made a right decision with the PM2.
@MattRoseKnives
3 жыл бұрын
Great choice man! I have a 940, they're both great. Pm2 is a far superior slicer though. Not a huge fan of the Grips, don't live that plasticy handle lol
@tonyochoa7097
3 жыл бұрын
@len,I have all three,and you really can't go wrong with a pm2,(the grip and the 940 have certain standout qualities also)for general edc
@Elecerv
5 ай бұрын
I have a PM2 cruwear micarta, an old Military 2, a PM2 Maxamet, and i just recently purchased the blacked out Salt PM2 with Magnacut and milled g10 handles 👌 out of all the knives out there i will always rather have a PM2 in my pocket
@LurkingFear87
3 жыл бұрын
I've owned a para 3 for a few months and I love it I decided to get a pm2 also and got a good deal on a s45vn version with camo scales and after handling the pm2 I think I might like a little more than my para 3
@MattRoseKnives
2 жыл бұрын
I need to check out the s45 version. Heard it's great!
@devon08059
3 жыл бұрын
The Rat 1 has more screws and non milled liners. The PM2 is U.S.A. made and a lot went in to making it tough and light weigh.
@majormassenspektrometer
3 жыл бұрын
Light weight yes, tough not so much. Cold Steels are made tough.
@MattRoseKnives
2 жыл бұрын
Agreed!
@devatwell334
Жыл бұрын
Rat 1 is tested and tried and they are insanely tough probably tougher than the pm2 or pm3 honestly
@mendoafgoo420
2 жыл бұрын
The 940 looks good but it is a bad cutter and to thick behind the edge. I think the pm2 is a far superior blade shape and the utilitarian design makes it so much more versatile imo. You have the thickness for a hard use knife and you also have the insane grind they do with that wicked tip that makes it excellent for fine detail work. I love benchmade axis lock but the only knife I’ve ever had from them that cuts worth a damn right out the box is the 535bk-4 Bugout with the m390 and aluminum scales. That drop point blade and hollow grind make it such a better cutter than their flagship griptillion or is Osborne (940). Granted not all knives need to be laser beams but I want something that can both slice and handle everyday tasks with ease. For me the materials used, type of grind, the thickness behind the edge and how thick the blade stock is makes all the difference for true edc for me. The 940 just falls short in to many areas and I would never buy a Ontario rat 1 or rat 2 knives lol. The para 3 and para 2 from spyderco have insane laser beam blades with the blade stock to be beat to hell aside for the tip. The shaman is even better and can do even more imo. For me the carbon fiber and s90v Bugout or the aluminum and m390 Bugouts are right there with the pm3 and pm2 and look more visually appealing imo. They just don’t cut as fine or as precise compared to the spydercos. I only am mentioning these knives since you feature them in this video. I think the lynch or mxg clips are far superior and let the spydercos deep carry much better and no hot spots in the hands. The normal bugouts feel cheap but they are not and can take a massive beating.
@stinkstank5177
2 жыл бұрын
Spot on Captain, I agree with everything you mentioned. I have a 940 and it’s nice, but it just doesn’t slice with precision.
@jimdandy8603
Жыл бұрын
The msk Doug Ritter ,(basically a grip with flat ground 20cv blade,and g10 scales blows the pm2 away in every category,except weight,it weighs 4.6 oz.I edc mostly a kapara-if u ever handle one,you will know why
@Felix_love_watches
Жыл бұрын
Amazing review my friend one of the best I have seen on the pm 2 , specially beneficial for people like me new to the world of blade
@brianp602
3 жыл бұрын
Nice desk! Great video man. Looking forward to more.
@MattRoseKnives
2 жыл бұрын
Thanks bruhhhhh!
@turing2376
3 жыл бұрын
Interesting to hear your take. The video did leave me wondering what it is about tip down carry you dont like so much but sounded like maybe just didn't feel right to you for some reason, not sure. As a side, I had the RAT knife and it did not hold up to what I would consider moderate use. I could be forgetting but dont think I tried prying with it or anything and the liner lock still basically broke, got jammed over and didn't really work right. Anyway, thanks for the video.
@MattRoseKnives
3 жыл бұрын
That liner on the rat isn't the strongest! So yeah, I can totally see that. As far as tip down carry, it just feels like more of a natural draw doing tip up
@adammcguinness9950
3 жыл бұрын
The first thing I do when I buy a Spyderco, is buy a Spyderco sheath for it. The boxes are very ordinary but it is what it is. Cool review.👍🏼
@MattRoseKnives
2 жыл бұрын
Gotcha! Thanks so much!
@jaredkinzel7604
29 күн бұрын
It weighs 3.9 pounds.
@waldopepper4069
20 күн бұрын
yep, i thought the same. thats one heavy solid knife. 2 kilos.
@alcodie1558
2 жыл бұрын
FYI , the standard one is not a Para Military , its called just Military . I almost bought one but went with the Native Chief .
@vgman94
2 жыл бұрын
How is the Native Chief? I handled it in a store and felt a bit too long for me. What is your experience with it in terms of size, maneuverability, durability, edge retention etc?
@alcodie1558
2 жыл бұрын
@@vgman94 I find it really light for maneuverability . I don't know how durably it is . I don't really want to push it to hard since it doesn't have steel liners and the tip on it is like a needle . They say its strong enough but still I wish it had liners . I would imagine the edge retention would be the same as my PM2 because they have the same steel CPM S30V. But the Chief seems sharper to me though . I carry both . The Chief cuts only food items and the PM2 cuts everything else . To tell the truth if I had done my research better and had known about it not having liners I would have went with the Military or the Manax XL
@vgman94
2 жыл бұрын
@@alcodie1558 The Manix line is very well designed. I wish I could love the Military, but I’ve read several stories of liner locks failing and cutting the user recently and it makes me avoidant of them. I’ve heard not all liner locks are equal, so some knives might not be as risky, but I don’t know what makes a difference in the lock mechanism’s quality. Lock backs, compression, ball bearing all seem much more reliable.
@alcodie1558
2 жыл бұрын
@@vgman94 I guess it all depends on what you're doing and how you do it . I think the main problem is when people do things with jack knives that would be better done with straight blades . I do like the chief . The blade shape is why I went for it . But I wouldn't try gouging with it , not with that needle nose . But as far as slicing its a champ . I think the toughest lock right now is from Cold Steel , the Dead Bolt . Only problem for me is I like my knife to be light and Cold Steel doesn't do light : )
@Abaddon5850
2 жыл бұрын
So many Spydercos are beautiful
@MattRoseKnives
2 жыл бұрын
Ehhh some are! But ya know, to each their own
@Abaddon5850
2 жыл бұрын
@@MattRoseKnives lol
@Abaddon5850
2 жыл бұрын
@@MattRoseKnives especially when they're black they look like a gaunt creepy raven thing that really speaks to the goth kid in me.
@fesi1370
Жыл бұрын
thank you! greetings from Slovakia
@MattRoseKnives
Жыл бұрын
For sure!
@chimchu3232
2 жыл бұрын
I agree with you about the tip. Made me nervous when I first started carrying it, although I've found through using it that it's actually very sturdy, you'd really have to misuse it to break it.
@MattRoseKnives
2 жыл бұрын
Agreed!
@kenanmammadov7281
6 ай бұрын
It's definitely personal because I think all Spydercos are beautiful! (except for ones like the chef lmao). The moment I saw my first one I knew I needed one(and more haha)
@majormassenspektrometer
3 жыл бұрын
Compression lock extra push of strength? That's true for the Tri-Ad lock but the compression lock? Not really.
@THExDUDEx8624
3 жыл бұрын
On my old para 3 I would agree. I got a pm2 on s45 yesterday and the lock stick is insane. I have 2 press super hard. Tried using sharpie and graphite and that didn't work. Hoping it breaks in over time.
@KernowEDC
Жыл бұрын
I enjoyed this. Think I’ll go for the PM3 personally. Thanks for the help!
@MattRoseKnives
Жыл бұрын
Happy to help! Enjoy the pm3
@jasonmiller9495
3 жыл бұрын
Just bought this fro DLT in S45. I’m a Cold Steel nut so this will be my first Spyderco
@MattRoseKnives
2 жыл бұрын
I'm a Cold Steel nut as well, good first choice on the spyderco!
@shamitoson
2 жыл бұрын
After this, you will never buy a Cold Steel again. Beware the Spydie addiction.
@littlerougue
2 жыл бұрын
I am with you they aren't good looking but I got a pm 2 on the way just because I want a compression lock in my collection
@MattRoseKnives
2 жыл бұрын
Still a great choice, looks aside!
@whatittooye
3 жыл бұрын
Does the black G10 get easily dirty? (kinda like how fast black cars/trucks get dirty is what i mean)
@MattRoseKnives
2 жыл бұрын
Nahhh not in my experience
@Xanduur
2 жыл бұрын
If you’re that fidgety and use your knives to act as fidget toys, just get a balisong
@cintage
Жыл бұрын
Which is totally illegal to own here. Great idea. And trainers are not knives.
@CharlieMander843
Жыл бұрын
I feel there less useful PM2 is awesome to fidget and for heavy folder use.
@FRAME_ITT
3 жыл бұрын
Great review ! If you don’t mind me asking did you recently purchase the PM2 ? If so, what website did you order from. I’m trying to purchase one at the moment.
@MattRoseKnives
3 жыл бұрын
I got it on a knife forum on Facebook, but Amazon, Smoky Mountain Knifeworks, Blade HQ, all good spots!
@rickybristersmusic3658
3 жыл бұрын
@@MattRoseKnives what did u pay for it
@MattRoseKnives
3 жыл бұрын
@@rickybristersmusic3658 only 100$ but it was used. They go for around 150-160 new for the stock satin version in s30
@FRAME_ITT
3 жыл бұрын
@@MattRoseKnives thank you ! I ended up ordering a para 3
@kid5Media
2 жыл бұрын
Check out the tip drop test on this knife at Project Farm. No damage.
@MattRoseKnives
2 жыл бұрын
Impressive!
@nolanfoster2551
3 жыл бұрын
I just ordered my first pm2 and my one only worry is the FFG
@troyounce3295
3 жыл бұрын
Full flats are the best all around grinds and easy to thin when it gets beefy behind the edge through many sharpenings
@nickallen8333
2 жыл бұрын
It’s a knife not a pry bar
@flyguy7836
8 ай бұрын
I hear you on tip down it's dumb good way to get cut. And it's called a spyderco military and now they make a version that is like the pm2 it can carry all four ways but it's priced to high for me. I've had the original spyderco military and I hated the tip down carry it was ridiculous for spyderco to make it tip down carry.
@13irishsailors
3 жыл бұрын
Does your pm2 have a sharpening choil in it? If so Did you or the previous owner put it in?
@MattRoseKnives
2 жыл бұрын
It does! And yes the previous owner did!
@JimC121
3 жыл бұрын
Nice knives. Also nice precision bass behind you.
@MattRoseKnives
2 жыл бұрын
Haha indeed! Going to pick up a Gretsch g2220 here soon
@BLACKOPS6391
3 жыл бұрын
it's funny when you wanna buy a knife you been thinking about getting for a while but oh ya they don't exist anymore... kinda like ALL OG Italian stilettos smh
@MattRoseKnives
2 жыл бұрын
Lol true m8
@andyhayward1261
2 жыл бұрын
Damn I never knew the pm2 weighed 3.9 pounds!
@MattRoseKnives
Жыл бұрын
Yeah it’s a little known fact 😂
@ryangames1708
2 жыл бұрын
spyderman cracked me up 🤣
@MattRoseKnives
2 жыл бұрын
🤣🤣🤣
@bhilton5898
3 жыл бұрын
YOOOOOO what it doo sauce!
@firstlast2514
3 жыл бұрын
I just picked up an all black S45VN PM2. Love it. Also, how's your novel going? I'm honestly interested in it. You said it's Sci-fi fantasy? Or science fantasy?
@MattRoseKnives
2 жыл бұрын
Thanks for the comment, and sorry for the delayed response. It's going very well! Editing is almost finished on it and I will be sending it to agents soon seeking representation. It is science fantasy, a few books that I could compare it to genre wise would be A Princess of Mars, The Fifth Season, even a bit Star Warsy lol
@jamesfair9751
2 жыл бұрын
I don’t think it’s the hole that makes them look meh it’s the fact they all look like birds and since birds eat spiders yeah that also throws me off. Having said that I have many many many spydercos lol 😂
@murphy4yt
2 жыл бұрын
3.9 pounds for the PM2? I had no idea
@MattRoseKnives
2 жыл бұрын
Surprisingly heavy
@j.wsoutdoors2886
3 жыл бұрын
2:43 he said this knife weighs 3 lbs
@MattRoseKnives
3 жыл бұрын
Well that's because this version does. The liners are made of vibranium, and the scales were forged in the heart of a dying star.
@flyguy7836
8 ай бұрын
Your clip on the pm2 is way off get a star wrench and fix it you will see a difference. Your clip is way off bring it more to the middle it will ride better in your pocket good video man. I've also had several 940s there a good knife for small edc carry
@davidpyper82
3 жыл бұрын
It weights 3.9lb Jeases
@MattRoseKnives
2 жыл бұрын
It's made of vibranium
@devon08059
3 жыл бұрын
I have the Same Star Wars shirt your wearing.
@MattRoseKnives
2 жыл бұрын
Dope shirt!
@d3ltaohniner261
22 күн бұрын
*you're
@indica_daze
Жыл бұрын
Never bought one just simply because they're ugly I just bought my first and I hope I like it I'm a Benchmade super freak man
@cwsmith17
3 жыл бұрын
Good reviews
@MattRoseKnives
2 жыл бұрын
Much appreciated!
@gunner3548
2 жыл бұрын
The blade could be less wide if they would drop that enormous hole and use a thumb stud, and could be longer without that unneeded blade choil and lanyard hole. Good work as always. Best regards.
@MattRoseKnives
2 жыл бұрын
Good point! And thanks!
@olbillyboi1829
Жыл бұрын
They could but then it wouldn’t be a Spyderco
@pintorthepintor3964
5 ай бұрын
RIP at 12:48
@jrex3
3 жыл бұрын
I've been trying to bring myself to want to buy a spyderco despite the fact that they look like a knife that should be sitting next to the register at a hardware shop for 9.99. I just can't wrap my head around a knife that costs over 150$ yet doesn't have thumb tab to open with as opposed to just a hole. It doesn't have assisted opening. The steel doesn't make it that price because you can find better looking knives with the same steel for cheaper. The grip looks literally as basic as you can get, from pictures it looks like the cheapest plastic you could find shaped into a handle. I think I'm just going to get a Byrd Cara Cara 2 and use it for a while and just know that a pm2 is supposedly a fair bit nicer because tolerances and screws tightened in a way that 98% of anyone that ever holds it will never notice and whatever other reason people have to justify the cost.
@evgenybelilovskiy1205
3 жыл бұрын
I do not know what knives you have been handling, but the Spyderco does not look or feel "cheap". The para 2 is not for everyone, but Spyderco definitely has a blade shape that you may like. The "spidey hole" is actually more comfortable than a thumbstud in my opinion as it opens up more deployment options and is easier on the fingers. Obviously you never handled one, so I suggest going to a knife store and playing with one. The so called plastic is G10, which is a very durable material. The second material they use are their FRN (fiberglass reinforced nylon) bidirectional scales. They offer some of the best traction on the market, and are very ergonomic. The Byrd Cara Cara has literally all of the things you complained about, a slightly more uncomfortable hole, an aged lockback system which is neigh impossible to close one handed, and blade steel comparable to AUS-8. If that is all you can afford, by all means go for it. For the price, not a bad knife. If you can though, I suggest buying Spyderco for superior handling and materials.
@jrex3
3 жыл бұрын
@Evgeny Belilovskiy it does look cheap. Plenty of people agree. From just looking at pictures they look like cheap plastic handles. I can see the hole being more comfortable but it is the absence of material as opposed to the inclusion of more material that I am talking about. More cost for less material. No I have never and the closest nice store that would have one is 4hrs away. I want the CC2 to get a basic feel of something made by them. If I am ok with it then I can know that going for an actual Spyderco would only be better. I don't care about the lock back system. The pm2 just moves the stop/unlock from the front to the back.
@evgenybelilovskiy1205
3 жыл бұрын
@@jrex3 I have not seen a single person complain about handles looking cheap. The ergonomics of said handles or even the feel of the material may not be for everyone, and that's fine, but this is literally how most G10 handles look like. The Byrd.knives are a good predictor of how Spyderco's feel. Good luck on your purchase.
@napalmholiday9708
3 жыл бұрын
The hole is objectively better than thumbstuds from a deployment standpoint, the downsides are worse aesthetics and a it results in a design that takes up a lot more pocket space.
@MattH-wg7ou
2 жыл бұрын
We all have our preferences and I used to not like Spyderco until I handled a PM2 and there is just something nice about them something quality. And Im a Benchmade Black Series, Zero Tolerance, Hinderer, and Microtech owner. So no custom crazy stuff but Im definitely acquainted with quality knives.
@wills.8662
2 жыл бұрын
3.9 pounds?! You can also use it as a bludgeon! j/k I know you meant ounces
@MattRoseKnives
Жыл бұрын
🤣🤣🤣
@BrandensOutdoorChannel
2 жыл бұрын
3.9 LBs is heavy!
@MattRoseKnives
Жыл бұрын
🤣🤣🤣
@d-nice8834
11 ай бұрын
They should be ashamed, a buck 60 for a knife with a free standing stop pin. once you have one fail , in an emergency situation, you'll avoid em like a " made in Pakistan" flea market knife. You gotta ask yourself, what's holding that " big ole pin" in place?... probably 2 little screws just itchin to leave you up shit creek without a paddle .
@ttattx
8 ай бұрын
benchmade fanboy... love that butterfly tax, and terrible qc. ok
@Yazid29261
5 ай бұрын
Spiderman
@dinocastagno440
2 жыл бұрын
Screw benchmade!
@MattRoseKnives
2 жыл бұрын
Lol nah I like em’
@MrGarwood420
3 жыл бұрын
Omega springs suck
@MattRoseKnives
2 жыл бұрын
Lol can fully fight you on that one
@MrGarwood420
2 жыл бұрын
@@MattRoseKnives I highly doubt you can. First off your videos show a bunch of knives with almost no wear on them, so I would strongly suggest you don't act like you have really put them to the test because it's clear you haven't. I also have 4 people who agree with my comment. I have broken two benchmade omega springs just opening them. You want a knife with the same action but with a higher quality spring? Get a Spyderco manix 2.
@MattRoseKnives
2 жыл бұрын
@@MrGarwood420 lol I meant *can't* I've broken two. One on a 940, another on a Crooked River. Also, merry Christmas!
@sgtgrantham
5 ай бұрын
Is it a knife review or a review of you opening and closing knives. Stop flipping the knives and show them.
@skankhunt4527
2 жыл бұрын
Fruit
@MattRoseKnives
Жыл бұрын
…vegetable?
@dragon3831
3 жыл бұрын
Stop right there as the pin take the brunt,....everytime you flick that blade out, the pin takes the brunt eversomore messing up the lock. It's a natural occurance when you flick the blade, it hits against the pin messing up the lockup. Everyone does it. And you wonder why you have blade play. Bang, bang, bang against the pin blade play is what you encounter. Man does anyone actually understand shit!
@MattRoseKnives
2 жыл бұрын
No... no we don't
@blackie5551
3 жыл бұрын
spyderco its ugly knives with a hole and a brittle steel
@brandongilbert6488
3 жыл бұрын
The spidy hole us very practical and easy to use tou can flip it out with eaze
@blackie5551
3 жыл бұрын
@@brandongilbert6488 thumb stub is so nice
@MattRoseKnives
2 жыл бұрын
Ugly... yes. Brittle steel? Maybe for a fixed, but not folding.
@johnporterfield7523
Жыл бұрын
I've got a PM2, love it.... Saying that I also love my tenacious.... And Manbug
@rickthompson9946
Жыл бұрын
Good grief! Is it really necessary to flick your knife 327 times in the span of a 15 minute video? Nice video otherwise.
@jimdandy8603
Жыл бұрын
I just cant get past the blade to handle disparity on the pm2I have a very nice o e that I rarely,I prefer my kapara,ikuchi,or even myendura
Пікірлер: 130