I appreciate you leaving out the monologue. This is exactly what I need.
@ChrisAsipyan
2 ай бұрын
You're welcome
@i_Gotcha_
Жыл бұрын
Dude thank you so much not too many videos on this kind of thermocouple. Thank god I came across yours! 🙏🏻
@ChrisAsipyan
3 ай бұрын
You're welcome
@user-qu2us6lf1d
8 ай бұрын
My burner exactly the same. I replaced it and it worked like a champ. TY so much
@ChrisAsipyan
8 ай бұрын
You're welcome!
@everythingismediocre
6 жыл бұрын
Great tutorial! No fluff, no fat.
@SimplePleasuresMTB
6 жыл бұрын
Ryan Lynch no shitty music 😓
@i_Gotcha_
Жыл бұрын
Also thanks for putting the link to it in the description you’re a savior!
@ChrisAsipyan
3 ай бұрын
You're welcome!
@julieking4035
6 жыл бұрын
Thank you so much for posting this video! You were a life saver. Your video is the only one I've found that shows the AO Smith and Honeywell combo that I have. I followed your instructions and everything worked perfectly and it was quick/easy. The hardest part was finding a pluming supply store that carried the replacement thermopile. ;) Thanks again.
@isaiahutley3475
2 жыл бұрын
Where did you find it
@tonyalvarez352
Жыл бұрын
Great video!saved me from calling a plumber and a lot of money thanks
@ChrisAsipyan
3 ай бұрын
You're welcome!
@unrulysimian3897
5 жыл бұрын
Have had problems with these Honeywells. Thanks for the vid!
@maschngon
2 жыл бұрын
This is exactly like my mine. I found the part calling the number on my water heater
@i_Gotcha_
Жыл бұрын
We’re you successful?
@i_Gotcha_
Жыл бұрын
Currently installing mine and afraid when the pilot flame lights up lol looks like it’s burning inside.
@maschngon
Жыл бұрын
@@i_Gotcha_ yes.
@i_Gotcha_
Жыл бұрын
@@maschngon I had a thermocouple issue on the old one. And I tried cleaning it with emery cloth and was able to fire the pilot and get a flame. But the flame was out of control and too big so I had to buy a new assembly of the thermocouple. So I’m hoping it’ll work. Was it as easy as it looked after watching this video?
@maschngon
Жыл бұрын
@@i_Gotcha_ the warranty send me new everything I unscrewed it and replaced all new updated. New burner and thermocouple. And it was very Easy
@RealtorinCalifornia
5 жыл бұрын
Thanks for the video. I didn’t trust the amazon part which wasn’t exact so I went with the part matched for the model from Sears parts direct. It came in 5 days. I used the old pilot tubing because some reason when I put on new tubing it leaked gas.
@mattodrums
3 жыл бұрын
Inspect and be aware of tears in burner screens! Whirlpool/AO Smith has known issues w/ burner screen ruptures and Honeywell Gas Valve replacement (to help detect burner screen tears).
@ChrisAsipyan
23 күн бұрын
Good to know! Thanks for the insight.
@48Marlon
6 жыл бұрын
Your video makes it really simple, thanks for the refresher course
@joeschmid6028
5 ай бұрын
Nice Job - - Thanks -
@ChrisAsipyan
4 ай бұрын
You're welcome!
@edilitonamit1321
5 жыл бұрын
Mine went out ( no stays light)today..I was about to replace the thermocouple..... Am glad I called the manufacturer and help me troubleshoot it...he told me to reset the tiny black button an d it works again
@vickyiannucci6630
5 жыл бұрын
How did you reset it?
@edilitonamit1321
5 жыл бұрын
@@vickyiannucci6630 from the gas valve on the right there's a white and red wires follow down and you'll see a solenoid ..there s a tiny button ..push it.
@dragonfly1414
6 жыл бұрын
Great video Chris, Ok now I remember gas furnace video they sand it and it work without replace a new one. I'm going to try tomorrow to sand thermocouple and see if it work but I do need to get a brand new one just in case.
@ChrisAsipyan
6 жыл бұрын
I'm curious... Did sanding it work?
@jfarinacci0329
2 жыл бұрын
This is a really good video. Thank you.
@ChrisAsipyan
2 ай бұрын
You're welcome
@sa-wp2sk
3 жыл бұрын
Great job, perfect explanation
@ChrisAsipyan
23 күн бұрын
Thank you!
@MegaChang9
2 жыл бұрын
It is really well made! Thanks
@ChrisAsipyan
2 ай бұрын
You're welcome
@chamuko999ify
Жыл бұрын
You forget something real important, if you see the green staff on the burner screen is mod you need to clean it with a wire brush otherwise the light indicator will tell you to replace it the burner
@ChrisAsipyan
3 ай бұрын
thanks for the additional insight!
@johnombogo276
3 жыл бұрын
Good job
@ChrisAsipyan
3 жыл бұрын
Thanks
@rickcrawford7307
4 жыл бұрын
Where is the part # located. Great video. Can you just replace the thermopile? Thanks
@deepthoughtsradio
2 жыл бұрын
Very much appreciate this video.
@ChrisAsipyan
2 ай бұрын
thanks
@pl9742
4 жыл бұрын
If the pilot flame is on the side, it would not be easy to light up the main gas nozzle. Why the pilot flame is not near the main gas nozzle in the middle?
@alpinehs
5 жыл бұрын
Great and helfull video
@Redraven059
6 жыл бұрын
great video. Thanks
@ddneb
3 жыл бұрын
Great Job!!!
@ChrisAsipyan
14 күн бұрын
Thanks!
@OLDSKLCHEVY
7 жыл бұрын
Great video, thanks.
@michaelgaines190
5 жыл бұрын
Thank You
@renemacias1956
4 жыл бұрын
me ahorre tiempo en buscar en Amazon. El número de parte del termocopler y problema era de a 90 grados o más temperatura afuéra está el boiler y se apagaba en tiempos de Verano en California thank.
@CliffColburn
7 жыл бұрын
Thanks! Great video!
@rj5822
3 жыл бұрын
Pilot lights up, but not status light comes on, and pilot turns off when black knob is released.
@BradyFish
8 ай бұрын
That means the thermocouple needs to be replaced.
@ChrisAsipyan
14 күн бұрын
Thanks to the very helpful KZitem community for all the knowledge being shared!
@tonybruno9897
5 жыл бұрын
This water heater does not have a thermocouple. It has a thermopile!
@ffinkral
4 жыл бұрын
Lol. They actually have both. Thermopile is the energy source of a water heater and the thermalcouple tells the gas to keep flowing because it detects the heat source from the pilot light.
@chadmcgovney2721
3 жыл бұрын
Thermopile is just 2 thermocouples boys
@jamesmoore7484
4 жыл бұрын
there are two red and two black wires coming out of my natural gas reliance 606 hot water heater and there is only 2 plug-in spots on my Honeywell gas control valve where do these wires hook in
@VvXXXvV
5 жыл бұрын
how do you unplug the red/white wires that go into that black plastic box? 0:41 seconds in and it just disappears without explanation.
@RealtorinCalifornia
5 жыл бұрын
it pulls out...the whole plastic housing. just gotta wiggle it a bit. I used some needle nose to grab the plastic. little tugs and it came out. I was hung up on that at first too.
@i_Gotcha_
Жыл бұрын
My flame in the background looks super red and burning the back part? But not burning it just super red flames when turned to hot or to A & B
@ChrisAsipyan
3 ай бұрын
We're you able to get more insight about this?
@morenolocot
5 жыл бұрын
Thanks for the video chris
@user-sq3ps3md8j
11 ай бұрын
Where did you buy the right replacement?I don't see it on Amazon.
@ChrisAsipyan
3 ай бұрын
Hi, I have linked the part I used on Amazon in the description of the video. However, you may not have exactly the same heater as me. It would be best to get the model number of the part you need and search for that exact same one you need.
@jstsumguy29
6 жыл бұрын
My water heater don't have those sensor wires you unplugged?
@williamkeith8944
3 жыл бұрын
Just think about all the crap they force us to learn in high school when we should be learning things like this and other life skills issues. I told my friends Sons and Daughters to go into the trades, don't get a bunch of college debt. Look at how much a plumber makes per hour!
@ChrisAsipyan
23 күн бұрын
I agree!
@pl9742
4 жыл бұрын
what’s the name of this type of burner? the nozzle is different from the disk burner which is inside underneath , in the center of the tank.
@yolanda9730
Жыл бұрын
I cannot find the same control valve case even with the same model, serial and so on #'s The temp sensor connector won't fit or there is not spot for it. I wish I could send a picture. I have searched high and low for a matching part or even an adaptor. Can anyone help please?
@ChrisAsipyan
3 ай бұрын
That's unfortunate, were you able to find it?
@ldragon76
6 жыл бұрын
where can I get the complete part for ao smith 40 300 thermocouple? i bought one on ebay, but it does come with the electrical wire thermocouple like on this video. please help.
@ddallyfrmwestvalley6125
Жыл бұрын
How important is the chamber sensor when replacing the gas valve regulator
@ChrisAsipyan
3 ай бұрын
I'm unsure, perhaps someone can chime in on this?
@jkll888
7 жыл бұрын
Good job very good video
@saundrarobinson3071
7 жыл бұрын
jose lepe .
@chris9131980
6 жыл бұрын
What was the initial problem with the water heater? Mine does not flash any lights or anything. Do you think this is my problem. I was gonna change the whole gas valve.
@chris9131980
6 жыл бұрын
maddhattery562 no sorry, I haven't called anyone out. But as soon as I do find out something I'll leave a comment here. Sorry I couldn't be any more help at this time. Hi f you get any information before I do, could you leave a comment? Thanks!
@wilherald8982
Жыл бұрын
Would there be or some type of white substances like cement PVC cement or glue or corrosion where you unscrew the lines from
@ChrisAsipyan
3 ай бұрын
I'm unsure
@harryl8234
2 жыл бұрын
I have the same type of burner assembly you have for your water heater. I have an issue removing that burner assembly after the 2 screws were removed. Seems like the assembly if catching onto something preventing it from sliding out. Any ideas?
@ChrisAsipyan
2 ай бұрын
I know it's been a long while since you posted this comment.. curious... were you able to remove it?
@harryl8234
2 ай бұрын
@ChrisAsipyan I was never able to slide out the burner assembly. It was caught on something inside, I assume. Seems like the manufacturer did a terrible job assembling this water heater.
@TheClavo223
5 жыл бұрын
Is there a trick to re-threading the pilot tube and gas tube -- I am having a hell of a time getting them to re-thread!
@Christina926-
2 жыл бұрын
I'm having the same problem. Any suggestions?
@TheClavo223
2 жыл бұрын
@@Christina926- I started to reverse the threads and felt the fitting seat. Then I immediately threaded the fitting into place . tightly. I hope this helps 🙂
@allenkinchen
6 жыл бұрын
Such a shame that Honeywell builds such trash , Brand new unit installed and failed the first day . No voltage from Thermopile . I look at the design and it is horrible . Such a critical part of a Water heater and poorly designed . And I have talked with many guys whom have had the same problem . Naturally Mine happened the last days of December , Hard work for an old man to bring a Water heater up into his Attic and change it out . Disgusting to say the least . So now I go to Lowe's and buy a new Thermopile if they have one . The Unit would run a while and shut down , I watches as I lost voltage from the Thermopile , now zero Voltage, naturally the status light will do nothing . The igniter works fine and it did produce Hot water for an on and off period , then finally quit . Makes me so angry that America is producing such garbage by the thousands .
@clintwilliams9424
5 жыл бұрын
Man. You saying that naturally the status light will do nothing cuz the thermopile is bad!!!!! Made sense since it cant get any voltage to power the status light!!!! Now I know what to buy. Was worried it was gas valve. Thank you. That helped me mote than anything cuz my main concern was that damn light not working and was thinking it was gonna cost 150 vs the 31.99 for the thermo assembly!!🙏🙏🙏🙏
@IntelligentElephant
4 жыл бұрын
It's HONEYWELL, they're bit really an American company anymore. But they're easy to fix
@IntelligentElephant
4 жыл бұрын
Also you can clean thermopiles sometimes it'll work again
@darthpaul8761
4 жыл бұрын
Where did you get the part. I can’t find one for my model heater
@stevepattyson7556
7 жыл бұрын
Thumbs up video thanks
@mckenziestolarczyk1011
5 жыл бұрын
i cannot break loose the manifold tube. it feels like if i turn too hard, i will break the control panel. any suggestions?
@sakitlikod1
5 жыл бұрын
Yes it is very tight,I did mine yesterday and I used a small pipe extension to break it loose. Put your other hand holding the gas valve while the other hand loosening the manifold nut. I hope this help
@sakitlikod1
5 жыл бұрын
Option 2 is that you can spray some wd40 around the thread first then use my procedure
@recipientsnotnamed
6 жыл бұрын
Hi - I am trying to replace the thermocouple on an old gas water heater. I am having difficulty removing the burner assembly from the thermostat/gas valve fixture on the outside of the tank. I can't get the bolt on the pilot tube loose. The bolt seems to be a soft metal and now has a bunch of nicks, etc. from me trying to remove it. Questions: 1) Can this be a "left-handed thred screw" situation where you must turn the bolt CLOCKWISE to LOOSEN? 2) Should I be using a FLAT adjustable wrench instead of toothed adjustable wrench? 3) Is there anything that the pros use that would help "grab" the nut better and leave fewer nicks - something like a kitchen jar gripper comes to mind. Thanks so much for any help you can provide!!!
@user-ke9jk7rb5w
6 жыл бұрын
6 flash error means burner fail. after replace burner assembly , water heater start work but fail again after 3days. Could you tell me what is wrong?
@TheErwin68
5 жыл бұрын
Need new themostat
@larryb883
2 жыл бұрын
Am I missing how to pull the red and white wires? You don’t seem to have them. Mine are to the right on the module in the input that is empty?
@ChrisAsipyan
Ай бұрын
I might be using a different model heater
@willr.1192
4 жыл бұрын
Have a question about this, I did all the steps as explained. But when I turn it into in the temperature to hot. ( not A B C VERY HOT) it’s turns off. Normal blinking just once. when I restart it same thing. What could be the problem?
@lawofattraction420
5 жыл бұрын
Ok...I have a brand new (installed yesterday) water heater with this valve that will not light the main burner. It has 2 flash thermopile,low voltage code. I replaced the brand new pilot assembly with a brand new pilot assembly and it still won't light the burner. Pilot works fine. What's up with that?
@A72CUTLAS
7 жыл бұрын
Excellent video. More like this and I'll be a plumber. lol
@youngforever4888
7 жыл бұрын
can i replace (or bypass) this electric thermocouple with the old thermocouple? my home depot only has the old ones... thank you
@michaelmcfeely6588
3 жыл бұрын
I am about to replace my 18-year gas water heater. I prefer the old reliable gas valve, not the new fancy electronic valve. I know not to put gasoline in the basement, so I have never had a fire or explosion. The new fancy valves will cost more and will be less reliable. This is not progress.
@ChrisAsipyan
23 күн бұрын
Thanks for the insight!
@clamato422
6 жыл бұрын
why didn't you show how the red/white wire clip comes off?
@ChrisAsipyan
6 жыл бұрын
Camera malfunction :)
@ademiranda2
6 жыл бұрын
good video, a bit laborious. How much on average will a plumber charge for doing this job?
@ChrisAsipyan
6 жыл бұрын
+Alejandro De Miranda ..but, what's the fun in that?
@mileech2107
6 жыл бұрын
When I google estimates for labor ranged from 125 to 150 for an hours work.
@Isaiasdiaz10
2 жыл бұрын
Do I have to take out all the water before doing this?
@ChrisAsipyan
2 жыл бұрын
Nope... Just turn off the supply going into the tank by closing the valve nearby
@Isaiasdiaz10
2 жыл бұрын
@@ChrisAsipyan Thank you 🙏
@ChrisAsipyan
4 жыл бұрын
Replacement part here: amzn.to/2n7WdFW Some of you may have this one: www.supplyhouse.com/AO-Smith-100281571-Thermopile-Assembly
@LG-nh4bs
4 жыл бұрын
That's not the replacement thermopile as shown on your video. The one on the link has a cord to the switch. Yours in the video does not have a switch.
@LG-nh4bs
4 жыл бұрын
Your link is incorrect. The thermopile in your link is for a burner with the switch. Yours in the video does not have a thermoswitch. Wrong link.
@jburkett83
2 жыл бұрын
This part isn’t an exact replacement, but it will work. You just need to cut off the two connectors on the end of the red wires and splice the two ends together. I soldered the wires together, but a simple wire nut will work just as well. I did the install this morning and the pilot stayed lit on the first try.
@user-sq3ps3md8j
11 ай бұрын
@@jburkett83Thank you for the information, I am going to try to see if it works.
@keenankong8537
6 жыл бұрын
What was your original problem? I have 5 lights flashing which means sensor failure. Not finding much info on the web about my issue. Any help would be appreciated.
@fredrickwashington1678
6 жыл бұрын
khanghis Keenan I think this one is for 2 flashes
@yolandahacker262
3 жыл бұрын
what was that green stuff on the burner screen? Mine looked the same except upon igniting the burners it sound like that green stuff was dripping on the burner screen and sizzled. I thought my tank was leaking water. It must be coming from the center vent hole of the tank. Can anyone shed some light in this issue? It also clogged my screen causing the system to shut down.
@williamkeith8944
3 жыл бұрын
Condensation as the tank starts to heat, it drips and is normal. The green is mineral build up from water boiling off when it hits the burners, all normal. You can take vinegar and scrub brush and clean it off if you like. Dry it off afterward.
@yolandahacker262
3 жыл бұрын
@@williamkeith8944 Thanks Keith. This must be the most expensive burner out there. This type burner should be used in a temperature controlled space that is above 32 degrees to avoid constant condensation dripping on the burner. Had to remove and clean five times during the winter.
@ChrisAsipyan
14 күн бұрын
Thanks to the KZitem community for all the insights!
@ediwudgo
7 жыл бұрын
Chris, please let us know where you bought the parts from?
@ronaldromero6772
2 жыл бұрын
Hello Edward, has Chris told you the part number and how he purchase the part?
@davidwark9971
2 жыл бұрын
It’s a thermopile, a thermocouple has a capillary tube not wire and it’s smaller….
@ChrisAsipyan
2 ай бұрын
Thanks for the additional information 👍
@jaxon112
7 жыл бұрын
I have the same looking water heater with the honeywell assembly. My pilot lite won't stay on. Gonna call the 1800 number tomorrow unit is only 4 years old. Great video what was your original problem...
@LG-nh4bs
6 жыл бұрын
Jack Gilbert i think I'm having the same issue as u. After the pilot lights and the gas valve blinks, i turn the nob to hot. It turns on for 30 sec then die. What was ur problem?
@jaxon112
6 жыл бұрын
The thermocouple. Depress the button on the rear to reset it
@dgweaver91
6 жыл бұрын
Jack Gilbert Did you replace the thermocouple?
@isayyo6857
3 жыл бұрын
The water heater I have doesn’t have a thermos witch but the thermopile assembly I bought has wires for thermoswitch.. can i still use it .. o what I do with the wires for them I switch
@ChrisAsipyan
23 күн бұрын
Unfortunately I wouldn't know. It's best to get the exact part you are replacing
@johnhagi7073
6 жыл бұрын
had to like and history when i will need it thanknyou
@youngforever4888
7 жыл бұрын
also is that a thermocouple? or a heat sensor? i thought new units didn't use thermocouple...
@dragonfly1414
6 жыл бұрын
I hate this kind of cheap build thermostat within 2 years it just doesn't light up, the square metal one last for a long long time. Now home depot don't carry it no more.
@klaybeck8518
6 жыл бұрын
Sos pls!where do you buy this part?i need it asap.
@michaellow4368
5 жыл бұрын
Shareing my experience and frustration. brand new AO Smith gas water heater purchased on 13May2019 from Lowe's model # G12-UT4040NVR 400 serial 1910113979916 Manufactured 03/05/2019 after installation each time burner kicked in loud scary noise occurred, and burner even shut off. turn out to be a defected burner. since under warranty A O Smith Provide two Pumbling company to contact which they have service contract. 3 days later replacement burner installed no more noise. than on 25May2019 noticed small gas leak from honeywell control valve at the top of the plastic box. gas company technician detected the leak even sniffer alarm didn't sound off. however technician still red tagged and turn off the gas supply to the tank. due to long holiday weekend our family without hot water until Tuesday as A O Smith provided replacment part# 100093971 and warranty labor reference work order # unfortunately technician not available until Tuesday 28May. sincerely hope no more additional issue with this A O Smith gas water heater.
@sheriluchene8901
6 жыл бұрын
I hate that your watching and then it jumps to the fast forward of what was going on, or onto the next step. its like wait....what happened...good video but i would have liked to seen it all...struggles and all to know what to expect.n No need to try and make a perfect video everyone knows some things are not that easy, This would have and could have shown how the struggle is but to keep going. Thank you for the video though
@YearVeteran
4 жыл бұрын
Are they really going to leave it on 'C'??.
@AtariBorn
4 жыл бұрын
I'm sure "C" is just to heat the water up quickly. "A" is almost too hot.
@cooldude2245
3 жыл бұрын
From the glass window I see no spark
@ChrisAsipyan
23 күн бұрын
That's unfortunate:/
@dailydriver4833
3 жыл бұрын
Video doesn’t show what part you actually replaced....
@williamkeith8944
3 жыл бұрын
The thermopile. Watch it again
@ChrisAsipyan
23 күн бұрын
I replaced the thermopile
@stevegarwood1382
5 жыл бұрын
Honeywell will be sued for all of the problems these units have.
@jesuleonard5303
6 жыл бұрын
This digital system is a trashed equipment. Thank God a friend tell me about the TITAN water heater factory in Hialeah ( Dade county, Miami FL) and one for ally trouble with this Honeywell digital shit go away.
@albishop4759
7 жыл бұрын
People I had to replace my Sears Kenmore in warranty Gas Valve. Sears wanted to charge me to have a service call to replace this valve that's still under parts warranty of 6 years .I explained to them that I am very handy and would replace it myself, they refused to send the part with out the service charge .I ordered the part paid for it and replaced it myself . So this is why Sears is going out of business they where once a great company years ago but they are to STUPID to understand what they need to do to keep there Customers Happy for return business. People DO NOT Buy Appliances from Sears .I hope Amazon gets in the Appliance game soon and put another nail in Sears coffin .Thanks for reading my review
@boostincrohns
7 жыл бұрын
where did u buy that piece . i didnt see it athome depot
@vaughnross9439
7 жыл бұрын
MAKE MONEY they sell this piece at Lowes.
@ediwudgo
7 жыл бұрын
Vaughn Ross did Lowes sell the whole assembly as shown in the video. I checked their website and couldnt find it.
@JAMESMCOX0756
7 жыл бұрын
Where can someone buy this part?
@walterdavis9969
7 жыл бұрын
James Cox
@Techknowverse
2 жыл бұрын
No fucking way was that nut that easier to loosen. Mine was so tight, I have to put a wrench on the left to keep the control valve module from twisting.
@ChrisAsipyan
Ай бұрын
Good idea about using a second wrench to keep it from twisting!
@clintwilliams9424
5 жыл бұрын
If anyone is freaking out about their status light. Like I was and watched 100 vids. Its the damn thermopile. Thermopile us where the status light gets it voltage from!!!! Its not hard ppl. Just turn off the gas. When u hook everything back up, dont tighten the nuts for the valves too tight cuz then u will have to get a new honeywell piece of shit gas valve!!!
@slidn1
2 жыл бұрын
this is called a thermopile...not the same as thermocouple
@ChrisAsipyan
Ай бұрын
Thanks for the insight!
@KJG-KJV
6 жыл бұрын
Like I said. Everything is on KZitem lol.
@linanicolia1994
5 жыл бұрын
Takes just minutes......
@paladingarcia8251
7 жыл бұрын
so those wires...do I rip them out ?..pry em off?...I watch these videos to get a step by step idea on "how to"...but to skip steps kind of defeats the purpose of the "how to" video....but thats just me...im a complete imbecile who needs step by step verbatim explanation...shouldn't be doing these kind of projects in the first place...lol
@thetyleraugust
7 жыл бұрын
Paladin Garcia any tips on this? Can't get past this step. Don't wanna break the wiring apparatus.
@yertelt5570
6 жыл бұрын
needle nose pliers, grab top and bottom and pull straight out.
@dragonfly1414
6 жыл бұрын
I'm a woman and it very easy for me to tell my 2 years ago they were 17 and 18 sons what to do, now they're both working full time and school, 12 hrs from now I had to go and do it.
@williamkeith8944
3 жыл бұрын
@@thetyleraugust look on you tube for tutorial on unplugging wiring connectors. Use your head and work the problen.
@thetyleraugust
3 жыл бұрын
@@williamkeith8944 haha this was 3 years ago. Everything worked out 💪
@parentconcerned6827
7 жыл бұрын
Thermopyle..
@ChrisAsipyan
3 жыл бұрын
Some of you may have this one: www.supplyhouse.com/AO-Smith-100281571-Thermopile-Assembly
@shanewilson3141
5 жыл бұрын
Around the 4:33 mark you skipped over an entire section of replacement of the thermocouple. What good was this video? What a joke.
@chrisbike
5 жыл бұрын
I think I did alright... Refer to the many people who thanked me in the comments of this video and you might answer your own question.
Пікірлер: 187