✈️WANT TO BECOME A PILOT?✈️ bit.ly/474j06T
📗📗📗GET MY NEW BOOK amzn.to/32TH4x7 📗📗📗
📸 INSTAGRAM FLYWITHCAPTAINJOE: goo.gl/TToDlg 📸
🌐MY WEBSITE: goo.gl/KGTSWK 🌐
🛒👕---► T-SHIRT SHOP goo.gl/Svrqmx ◄ --👕-🛒
📖👨 NEW FACEBOOK PAGE: goo.gl/heUKGb 👨📖
▼▼My FLIGHT-KIT I highly recommend for you guys▼▼
MY HEADSET: amzn.to/2CrTrzz
MY SUNGLASSES: amzn.to/2VY6FNo
MY PILOT BAG: amzn.to/2DiWKux
Company iPad: amzn.to/2W1zM2n
▼▼The VIDEO EQUIPMENT I use in my studio and outdoors▼▼
MY CAMERA: amzn.to/2T1VK3g
LIGHTING: amzn.to/2szSRv4
IN-FLIGHT RECORDINGS: amzn.to/2VY7A0g
------------------------------------------------------------------------------------
Today´s topic will be all about Flex Temperature, what is good for and how often do we use it.
Prior to every take-off you need to perform take-off calculations, giving you the speed V1, VR, and V2 and they necessary flex temperature to get the needed thrust setting for the take-off roll and lift off and eventually first climb out.
The flex temperature is a assumed outside air temperature, relatively high, forcing the FADEC ( Full Authority Digital Engine Control)-unit to reduce the thrust output to reduce the engine wear of the turbine in such expected "hot" temperatures. So once applying take-off thrust by setting the thrust levers to the FLX/MCT detent, the airplane will roll down the runway with a lower power setting thus increasing the take-off with higher speeds and decreasing the stop margin available. But you can always gain full available power by putting the levers into the TOGA detent position.
The result of using a high flex temperature is that is the speeds are higher for lift-off, cause the plane won´t accelerate as quickly as it could and therefore using up more runway, resulting in a shorter stop distance and case of a rejected take-off, obviously!
If we would have used a lower flex temperature, the lift-off speed is much lower and the stop distance is much greater compared to the higher flex temperature.
So the conclusion of that is, the lower the flex temperature, so the fake outside air temperature for the FADEC, the more power will be set when applying thrust, so the closer it is to TOGA. The higher the flex temperature the more the engine is derated resulting in longer take-off roll with higher speeds and at the same time reducing the engine wear.
I hope you enjoy the video, I appreciate a thumbs up and a comment.
The videos used in the video were provided by
HamburgvideosHD
/ elbdeichkiebitz
and
MUC_Spotter
/ @mucspotter
Please make sure to check out their channels.
The thumbail pictures was provided by my instagram follower: photoaleksi
Background song, copyright free music: Stellardrone - Cepheid
See you next thursday!
Equipment I use:
Camera: amzn.to/2nEHPDM
Microphone: amzn.to/2nff2oF
Lights: amzn.to/2nEPGkU
Негізгі бет Ғылым және технология What is FLEX TEMPERATURE? Explained by "Captain" Joe
Пікірлер: 1,1 М.