That sound at the end actually gave me a heart attack lol.
@anthonycopter1068
2 ай бұрын
Me too. The noise was worse than I thought it was going to be
@sethjansson5652
Жыл бұрын
"I'm good to turn around? Okay." *Turns into tractor*
@RodknockRhett
Жыл бұрын
I needed this laugh.
@yorselrus1996
Жыл бұрын
Lol
@dexterlewis20
10 ай бұрын
😂
@elleo3475
9 ай бұрын
I was moody then loled at this comment. I feel better driving my tractor now
@tramendous1985
9 ай бұрын
😂😂😂😂🤣🤣🤣🤣!!!
@s33j4y8
27 күн бұрын
Turned into an Abrams Tank in the end 😂
@mikefoehr235
Жыл бұрын
That is the sound of GM quality. The heartbeat of America
@rollinontwojohnny3586
Жыл бұрын
It’s a Dodge.
@mikefoehr235
Жыл бұрын
@@rollinontwojohnny3586 same 💩 different pile
@ep9372
5 ай бұрын
Nahh more like the sound of ppl not taking care of they car
@ElTartaz.35
3 ай бұрын
Ford guy huh?
@AfarikanMan
Ай бұрын
GM is quality
@lucoff732
4 жыл бұрын
My Silverado just started this today. I thought it was coming apart! Literally crawling beside it expecting to see a gremlin beating a steel bar with a wrench.
@lithiumlounge6731
4 жыл бұрын
lucoff did u find out what it was
@lucoff732
4 жыл бұрын
Lithium Lounge replaced inner and outer tie rods. Nothing. Passenger inner tie rod had an unattached boot but that wasn’t it. I can hear it coming from the transmission/transfercase/driveline. I seen that you said yours was a cv joint at the driveline. I’ll look into that.
@lithiumlounge6731
4 жыл бұрын
lucoff send ur email so I can send u a photo of what it is... I forgot what the mechanic called it but it’s in the drive line axil .
@tuckerjones_427
Жыл бұрын
@@lucoff732 u joint! Or cv!
@Fr3sh-Kush
Жыл бұрын
Tie rods. Chevy has the weakest ones in the industry.
@patsplace752
3 жыл бұрын
Same thing was happening with my truck I immediately turned it off and had it towed to a mechanic and it ended up being the wheel bearing
@giveme10feet
3 ай бұрын
That was my guess as well!
@Andy-lw8ex
Ай бұрын
So bad wheel bearing cv joint /ball joint can make the same sound then ??
@patsplace752
Ай бұрын
@Andy-lw8ex sound is most likely the wheel bearing assembly but could also be tie rod too only way to find out is check
@giveme10feet
Ай бұрын
@@patsplace752 wheel bearing pops when moving....tie rod clunks and causes front vibration when moving...cv axle pops when turning! You MUST learn all three of these young Jedi 😂!
@reefegaming559
2 күн бұрын
@@Andy-lw8exmy car sounded the same when the cv shaft broke
@smoothpotato957
Жыл бұрын
Cv axle for sure with the acceleration
@michaell3711
18 күн бұрын
No way...... That is not a CV axle. A loosen control arm or a shock without a rebound rubber.
@ControlAllDa1337
3 жыл бұрын
Sounds like a CV joint but might as well just replace the whole axle
@Looneytokk
Жыл бұрын
You should educate yourself because you don’t just change the joint. You change the entire axle. This is an IFS front end 😂
@Raii_Chu
Жыл бұрын
@@Looneytokk ? maybe you should educate yourself so that you know how to read. They said "replace the whole axle"
@beautifulbarbrah2215
11 ай бұрын
@@Looneytokkyea n learn how to talk to others instead of trying to act superior. They said replace the whole axle but even if they didn't you don't talk to ppl like that. You coulda just said hey it's the whole axle and gave some links on where to do research. Stop being an asshole 😂😂😂😂 at that
@JdmgjnFjahgks
5 ай бұрын
@@Raii_Chu Why is it always the most stupid that tell others to educate themselves? Dunning Krueger effect I guess
@eviljesus6111
4 ай бұрын
@@JdmgjnFjahgksI LOVE FREDDY KRUGER
@Dnasty1
5 ай бұрын
lol that thing sounded like a horse drawn carriage
@bostownent4816
2 жыл бұрын
I'm sure he's fixed it by now but for anyone watching this. Don't waste your money guessing. It's very difficult to determine between CV and Wheel bearing by sound only. A visual inspection and checking for play and in which direction if there is play. Do what you can to get as close to each part, as possible. Don't play the part swapping game and if you take it.somewhere it's still best to know what it is or you might be up sold on a whole new suspension. Good luck!
@lithiumlounge6731
2 жыл бұрын
Driveshaft cv joint
@jakobsmith3772
Жыл бұрын
I feel like a wheel bearing wouldn’t be that loud…. Unless she’s been ignoring it for months😂
@jovonstergarcia2705
7 ай бұрын
Drive shaft cv joint
@castlebilliards8712
5 ай бұрын
Driveshaft cv joint
@gabrielplaysguitar7728
3 күн бұрын
I think it might be my cv it turns a lil to the right when o accelerate
@CJ-fh5xq
2 жыл бұрын
CV joint! Our 2006 Toyota Sienna had our driver CV axle boot completely blown out and it would make the loud click screeching noise when you turn the wheel in a sharp turn. I would replace it ASAP because our unfortunately blew completely in a parking lot and you could see the ball bearings all over the ground.
@901champcity4
26 күн бұрын
Bro y'all are my heroes. Thank you I was about to buy a Rotor 😂 that's definitely the noise I keep hearing on my Lexus.
@gabrielplaysguitar7728
3 күн бұрын
Soo what did it end up being the problem ? Mine does the exact noise
@901champcity4
3 күн бұрын
@@gabrielplaysguitar7728 My passenger side hub fail off 😂😂😂 now the rear hub is bad. I changed my front hubs and control arms. 4 weeks ago. I was told to change all hubs then. But we all aren't millionaires lol. I spent 1000 on my car already. It's a Lexus so it's high maintenance but it's worth it.
@jerrymeeuwse4957
3 жыл бұрын
CV Joint. Constant Velocity joint. Short shaft side I think.
@What6918
Жыл бұрын
I don't think that truck has a CV joint 😆 CV axles are only in front wheel drives I thought
@justyn2400
Жыл бұрын
@@What6918 durangos are 4wd bro
@smokeythehuman3596
Жыл бұрын
@@justyn2400 not all Durango's are 4wd , they're rwd or 4wd but that suv does not have cv joints....
@damon323
Жыл бұрын
@@smokeythehuman3596 Can you explain the difference on a cv joint vs axle? I’m just trying to learn.
@brianpresley9745
11 ай бұрын
@@damon323A CV joint is typically found on the front end of vehicles. It has a rubber boot usually close to the tire that protects it from contamination. A CV axle is typically found on the rear of vehicles. It's fully metal and completely slides into the differential. It also 90% comes attached to a new hub.
@techseth
2 ай бұрын
That sounds like a drive shaft screaming for help. Check the front drive shaft, I just did mine on my 2002 Dakota and I had a similar sound.
@kawijedi4043
3 ай бұрын
Kinda sounds like the splines in your wheel hub rattling
@user-nb6ri6hw3s
8 ай бұрын
Wheel bearing or cv axle
@havelpants5248
Жыл бұрын
You know you can find out a lot by lifting the car and shaking the parts, spinning the tire etc.
@JUNEBUGLLC
2 ай бұрын
Not everyone got a lift bro 😂
@shidfard
Ай бұрын
@@JUNEBUGLLC Floor jack, goofy
@gabrielplaysguitar7728
3 күн бұрын
I lifted mine and the noise is not there anymore 😂
@wulf_senft4069
12 күн бұрын
CV Axle, Tie rods, Ball joint kit comes with tie rods usually
@anthonyslayton5851
Жыл бұрын
Sounds like a CV axle I just replaced mine today
@basedaudio1
7 ай бұрын
How much did it cost?
@helenposee2508
6 ай бұрын
Cost ?
@eviljesus6111
4 ай бұрын
@basedaudio1 it will cost you your whole soul
@tonytheslobgod5591
2 ай бұрын
@@helenposee2508When I did it the part was $90, only took me abt 45 mins!
@wulf_senft4069
12 күн бұрын
@@basedaudio1 takes about 200 for full kit but maybe 90 for just control arm, needs tie rod tuneup with cv axles. always replace wheel parts and sometimes cars just wear them like pants
@restlessdaydreamer
7 ай бұрын
@lithiumlounge7631 did you ever figure out what the noise was? Wheel bearing? Axle? CV joint? Differential joint? how much was the repair cost? it's happening to me too
@mark7362
7 ай бұрын
In another comment they said it ended up being the CV joint... Idk if its 4x4.. I've heard driveshaft U-joints make very similar noises before falling out
@mxji4271
8 ай бұрын
It Didn’t really do it too much while it was turning so I think it’s your sway link bars connecting the sway bar and the suspension together😊 only because if your ball joint was damaged to where it sounds like that then it would have snapped already or it could be the wheel bearing
@oldrango883
Жыл бұрын
Sounds just like mine before our left front CV Axle completely disintegrated lol. I have the same Durango and it’s an easy fix. Even roadside like we were.
@Ze_Moose
11 ай бұрын
Did you put some grease on it?
@joerez5172
2 жыл бұрын
Flux capacitor.
@lithiumlounge6731
2 жыл бұрын
Bingo
@pinkymanjezi8149
Жыл бұрын
😂😂
@brandoncody85
Жыл бұрын
Definitely the flux capacitor. Anyone with half a brain should know this...
@Elite_Employee
8 ай бұрын
It’s for sure either gingivitis or your chinchilla malfunctioning
@sirdanger8344
Ай бұрын
Yep. Ram out of prefabulated amulite.
@lorenzovillegas2457
11 ай бұрын
Sounds good
@Moochi4
3 ай бұрын
Lower and upper ball joints on my dakota snapped and gotta replace the axle 😮☹️😞
@321homewrecker
Жыл бұрын
What was the problem? I got a 02 SL Saturn and it's doing this, but i don't have to turn for it to pop and screech. It's loud, but I'm not sure what it be.
@dorianpeeden
Ай бұрын
I’m having a similar sound in my mercury sable 3.0 v6 only when I accelerate in gear don’t do it in park replaced cv axles nothing replaced lower motor/trans mounts didn’t fix the problem does it going straight and turning
@DeeperSpiritualSign
Ай бұрын
That’s VERY specific sound initially def an inner tie rod
@eamar8264
2 жыл бұрын
I had same problem before and I thought exactly same as you guys but was wrong, that noise comes from gearbox, unfortunately...
@thedisservip1091
Жыл бұрын
It’s ball joints
@eamar8264
Жыл бұрын
@@thedisservip1091 It was in the gearbox in my car..
@n54bry
Жыл бұрын
@@eamar8264 no
@Dixie_Normus
2 жыл бұрын
Cv, ball joints and tie rods probably lol
@user-ww8wt9nz1x
4 ай бұрын
Wheel bearing hub assembly for sure!
@littlemisssav4162
2 жыл бұрын
Ball joint
@FlatWHDF
11 ай бұрын
Ok. 🗣️now you CaN BACk IT uP!!!!! 😂😂😂😂
@lenniamartin
3 ай бұрын
Yep that’s what mine sound like right now
@p.capes1
2 ай бұрын
Fix it
@user-zp7oi6op6t
11 күн бұрын
Cv axle? Not sure 🤔
@EchavarriaJr
9 ай бұрын
Grinding sounds like the hub assembly.
@makeupwithmichelle7524
11 сағат бұрын
lol this helped thanks
@NJMuppet
Жыл бұрын
It's the wheel bearing. the same thing happened to me. Changing the wheel bearing fixed it
@idonotknowanynames
2 ай бұрын
Or CV or whole axle need replacing
@gabrielplaysguitar7728
3 күн бұрын
Ima try wheel bearing first mine is bad
@dronesharassingus8564
9 ай бұрын
Did you fix it ? What it was ?
@charliebrown316
Жыл бұрын
Sounds like it could be the differential going out
@techseth
2 ай бұрын
Very possible. I thought it was a completely worn front drive shaft, as my Dakota made a super similar sound and a driveshaft later I was good.
@jeremygonsalves2075
Жыл бұрын
Take it in asap. Happened to my car today and now the tire is engulfed in the fender. Gonna be 💵
@benjaminfreel7995
2 жыл бұрын
I have a 2001 Ford Expedition. It’s making this same noise but the only difference is it’s an AWD and the previous owner removed the cv axles so this can’t be my issue. I would assume it’s the wheel bearings in the hub assembly. Can anyone confirm?
@jhoncaponeofficial4407
Жыл бұрын
Yessir my 2001 monte carlo is in need of a wheel bearing fix asap . If he removed the axles it's definitely your wheel bearing. Ita terrible noise.
@natashaprevost4524
Жыл бұрын
My BMW sounds just like this right now, took it in and it’s the control arm bushing
@jakobsmith3772
Жыл бұрын
At least that’s what they told you😂 bmw dealerships are the biggest crooks out there!!😂
@davidmorales8644
3 ай бұрын
Ouch ! 😬
@dustincunningham3796
3 ай бұрын
Thats a shot cv boot and bearings
@toxicspider_yt9640
8 ай бұрын
That noise just started I thought it was my exhaust dragging but did u ever find out what it is I keep getting led to believe is a wheel bearing
@fvictor77
4 ай бұрын
Was it your CV joint
@johnphilly987
Ай бұрын
Sounds like it's dragging a hydraulic jack.
@michaelsaucier9790
2 ай бұрын
Sounds like a CV axle
@hilmayea5929
Ай бұрын
So what was the problem my Dakota making same noise
@headjoker6042
6 ай бұрын
2003 gmc Yukon well in Memphis I hit pot holes big ones everyday try the wheel hub since it only happens WHEN THE V IS ROLLING DUHHHHH
@johnchambers12
11 күн бұрын
Unfortunately i have seen backing plates get bent and rub on the rotor making that same noise.
@cloroxlavenderscent4307
2 жыл бұрын
I was thinking it's a bearing based on the noise. If you hear a grinding noise it could be the bearing.
@lithiumlounge6731
2 жыл бұрын
Driveshaft cv joint
@Blademast
3 ай бұрын
Cv or drive shaft?
@nicholasmcdede8893
4 ай бұрын
That was WAY more loud and exaggerating than my car, i still have no idea what's causing mine whenever i make a turn... 😫
@redmamba4695
4 ай бұрын
😂 people be looking
@Offensiveword
7 ай бұрын
That’s exactly the noise my Impreza makes
@danyelleroberson4879
7 ай бұрын
Did you figure out the issue??
@josephflores246
5 ай бұрын
Looking for the paperwork …. Same thing happened to my Jeep commander it wasn’t as bad as they thought it was though
@joshuagarcia6659
Жыл бұрын
Tie rod. Or maybe cv axel? I couldn’t tell if she was turning or not.
@khalilyounger519
11 ай бұрын
She clearly turned a little and you heard it. The turned left a little to go straight. While straight that noise was still there
@MrKL83
11 ай бұрын
Changed my inner and outer tie ends but nope. Still the same noise.
@Bruce_T
Жыл бұрын
Had this exact same sound coming from my bmw. Ended up being a long skinny spring lodged in-between my brake rotor and brake pad. Some how picked it up while driving.
@jjonathanv7963
Жыл бұрын
How did you take it off or where did you go?
@Bruce_T
Жыл бұрын
@@jjonathanv7963 Sorry after reading it again (just now) I was meant to say "... brake rotor and brake dust shield ..." not between my rotor and pad. Took it to my mechanic and they didn't charge me anything because they thought it wasn't worth the 10 mins it took them to tear it apart, drove off noise free!
@kingarthur9157
10 ай бұрын
Did you check the Blinker Fluid levels at all?
@gaming4tacos484
9 ай бұрын
Make sure to check that by unscrewing using a left handed screw driver
@kingarthur9157
9 ай бұрын
@@gaming4tacos484@ gaming4tacos484 Can only go to a regular store and get those. Getting a left-handed screwdriver from the Left-Hand store is the only place they can be found.
@standwithukraine3011
Ай бұрын
Well tbh hearing it really doesn’t help gotta put it up and check it out look and see what’s worn out , but that sounds like grinding wheel bearing broken inside? Idk like I said gotta look at it
@tamareharrison6012
6 ай бұрын
It’s your steering box gear catcher 👍🏾
@ShortsStockton
9 ай бұрын
Wheel bearing or axle
@sklallamghost9188
10 ай бұрын
That's what my father's differential sounded like when his truck broke down, I found a piece of metal in the differential small half circle some kind of sleeve or something I can't figure out where the metal came from? the drive shaft is loose so thats my next venture. I'm guessing a pinion gear. Sounded the same but I also took the whole rear axle apart and checked the bearings they were all good. I may have to check the cv joints after reading the Comments
@Mike-sr6gd
Ай бұрын
That could be the axle clip, and if that's the case that's the only thing that holds your axle in. I wouldn't drive it until you find out for sure
@sklallamghost9188
Ай бұрын
@@Mike-sr6gd I removed both axles and the C clips were fine. It was a thin piece of rounded sleeve type thing almost looked like someone used it as a washer but im thinking it's the differential bearings inside and not the outer axle bearings
@DavidGeter-fx8wp
6 күн бұрын
CV Axle?
@DCBDesigns
3 ай бұрын
u joint,wheel bearing, or pinion bearing
@beaubuterbaugh4197
6 ай бұрын
I would say either a cv axle or a wheel bearing.
@tonyaguilar7403
Жыл бұрын
i worked on a chevy silverado hd 1500 and it is because rim and rotor is not completely flushed against each other due to the fact that it was missing the wheel nuts. which in this case is clear that's the issue
@datboidominican
Жыл бұрын
i counted 3 lug nuts on that driver side wheel 😲
@davidcroix
Жыл бұрын
Hey man did you resolve the issue ? It was the ball joint ?
@Timetravel1111
9 ай бұрын
Yeah, what the heck? Where is the solution?
@raymondcurrie4955
7 ай бұрын
Did you ever find out that noise? Dealing with the same thing
@bobbyfrieson4641
Жыл бұрын
I thinks it’s probably a bearing maybe? Possibly
@jarrellfernandez9341
9 ай бұрын
So what was it ?
@Denzar007
3 күн бұрын
Cv axel. Or your wheel bearing.
@JFrostDevelopment
8 ай бұрын
Need a new axle unit on that side. While doing that, replace both inner and outer tie rods as well to be safe.
@takeemoutdoors3489
Жыл бұрын
Sounds like $1000 boss
@AyoBaby
Жыл бұрын
🤣🤣🤣🤣
@nicolehustles
6 ай бұрын
this was my bearing when this happened to my 05
@FreshBeatsification
3 жыл бұрын
Cv joint broken clanking around when the wheel turns
@justmythoughts6030
3 жыл бұрын
That was it most of the time? Everytime I back out or am turning my wheel after backing, it sounds so loud, clank, Pop.. 😦
@raulgonzalezzepeda3201
Жыл бұрын
@@justmythoughts6030 so what was it?
@TonyTheTruckGuy
Жыл бұрын
Sounds like wheel bearing or CV axle to me. Would need to jack up the front end to check for play.
@coty9626
3 ай бұрын
Could also be a wheel hub/ bearing
@jrockaz548
Жыл бұрын
99 percent sure it's the cv axle as the noise increases with speed
@xreaper9889x
Жыл бұрын
Those are the wheel bearings that happened to my Tacoma and the bearings were shot
@jrockaz548
Жыл бұрын
No bearing Ive ever heard sounds like that maybe just never heard a really bad one
@MasonLomax16
Жыл бұрын
Shit ,sounds the same as my truck started today i am wondering what it is whether a cv axle or ball joints.
@joshuacampodonico6554
9 күн бұрын
So that can be a few things that could be a wheel bearing ball joint could also be stabilizer end links I would have your entire suspension rebuilt thing about heavy trucks and cars once you put pressure on the one part they all start to fail after each one so to just fix the entire problem 1 time and not have to deal with it again replace the entire suspension system the truck is old enough so it’s not out of expectation to have multiple parts fail.
@binaryglitch64
7 ай бұрын
Sounds like it's probably one of your CV joints.
@TexasMade-mn1ff
11 ай бұрын
i have a 2007 Honda Civic that’s makes this noise towards the front right wheel when going over bumps , i was told it was my cv axel so i replaced it and it still makes this noise can someone please help me ? it sounds like my wheel is about to fall off
@BowedUpWitMike
11 ай бұрын
Tie rod ends sound like large steel banging together when turn the wheel all the way. That sounds worse then my tie rod end issue
@TherealSkilzVr
2 ай бұрын
Could also be bad u joints had this problem on my truck with the exact same sounds both u joints on my front drive shaft we’re shot so as it was slowing down it was bouncing around
@javiercoronel1169
Жыл бұрын
Good lawd
@beingabenitez8621
7 ай бұрын
Ours was making that it was the wheel bearing on our 2010 Toyota Camry's rear wheels
@thesinnermanRT
2 жыл бұрын
All of the above .....and some lol
@marsisacrazypandarivera9028
Жыл бұрын
🤣🤣
@lforce1298
11 ай бұрын
Fire rod 'n maybe cv joint... Not lubed and frozen that's why the heavy creaking
@Eccjx001
3 жыл бұрын
Just changed the wheel bearing/hub on mine yesterday for the same reason. Not impossible to be the cv, but more likely to be the bearing.
@lithiumlounge6731
2 жыл бұрын
Cv joint
@x6King6x
10 ай бұрын
If it’s in 4x4 most likely it’s the front driveshaft.
@oliviabell6414
10 ай бұрын
Its a "Do not drive" is what it is 😂
@taylorshea6856
19 күн бұрын
This is what my car currently sounds like, someone please help me
@oliviatate7647
Жыл бұрын
Would anyone know why a 2007 Mazda RX8 (RWD) be making this noise?
@ramonowens8957
9 ай бұрын
I’m glad idk what it is cuz that just means I haven’t experienced it so far
@al-bp1pi
Ай бұрын
To know exactly you need to jack the truck up and put it on stands, to rule out the issue.
@rubyhannah-5916
3 ай бұрын
Maybe put more than three lugs on and make sure it’s tight sounds like metal shearing
Пікірлер: 450