Let's hear your thoughts on the benefits of 6in props; I love a good quadcopter think piece
@argyleskyfpv461
Жыл бұрын
Great video. Nothing beats the ethix k2 props performance and SOUND!!!! Although the Azure Power bsp 6145 props are ridiculous. Short flight times, Monster punch outs and some serious speed. But nothing compares to the k2 with that perfect freestyle EFFORT-LESS feel.
@TimmyRC
Жыл бұрын
Thanks! Still waiting for a prop that can dethrone the K2!
@Robocopter_fpv
7 ай бұрын
I run a 5.5 inch quad and love it. Just wish there where more 5.5 inch props out there
@TimmyRC
7 ай бұрын
5.5inch is definitely slept on
@samuelepaganoni9741
Жыл бұрын
Thanks timmy, i build a similar 6" 4s setup but at 520g AUW (i'm using a 30g action cam). I tried the Gemfan 6030 triblade but they produce too much jello as they are made of a very soft material that bends too easily. I reverted to ethix k2.
@brandonwoodford579
Жыл бұрын
These props fluttter so bad at anything above 75% throttle with axisflying c246 1850kv on 6s. changed to hqprops and flutter, and vibrations are gone.
@brandonwoodford579
Жыл бұрын
Honestly ive been trying pretty much every prop for 6inch on axisflying c246 1850kv on 6s. Im persionally waiting for the HQprop V2 6x3.5x3, for now the 6x3x3 hq props with the thinner blade design like those 2.5" pitch hqprops. Personally the K2 sound like they are gonna rip apart at full throttle on the c246 1850kv. HQ 6x3.5x3 V2 (not available yet to public) are the way to go.
@antoineozaneaux6881
Жыл бұрын
great work .
@TimmyRC
Жыл бұрын
Thanks!
@KonstantinFPV
Жыл бұрын
Biblades are greate. Show me how to build tubular frame (motor mounts/main body mount).
@kaikkimeni2519
Жыл бұрын
I fly Gemfan 6030 because it's the best 😁
@TimmyRC
Жыл бұрын
I will have to try those
@oddworld1328
Жыл бұрын
if you're looking for best freestyle prop, probably look at something smaller than 6"... I would recommend you to try 5.5" tri blades from gemfan :) also aren't your motors getting overloaded with 6" props ? That would lead to increasing amp draw but no extra thrust around 100% throttle
@TimmyRC
Жыл бұрын
I've tried 5.5 inch triblades and they have the same characteristics I personally dislike about 5 and 6 inch triblades. I would give 5.5 inch twin blades a try if you know of any good ones. The motors are not overloaded; they keep making more thrust all the way up to 100% without excessive amp draw. I think the lower max rpm of the relatively low 1922KV helps prevent the motor from oversaturating.
@Finnv893
Жыл бұрын
In the video, the low pitch 6 inch props felt under-propped to him for the motor size.
@oddworld1328
Жыл бұрын
@@Finnv893 yes, because that prop might be more ideal for lighter weight builds
@Finnv893
Жыл бұрын
@@oddworld1328I meant the 2205.5 motors (stator volume 2089) have too much torque for the mild pitch 6 inch blades, they were over spinning but still struggling to generate enough rpm that those props required for proper lift; if anything contrary to your claim of his motors being underpowered, I believe they got enough torque on 6s to spin some 7 inch light pitch biblades for casual flights.
@drillzoom668
Жыл бұрын
What Range has the Spektrum DX8 can you fly long Range with it?
@Robocopter_fpv
7 ай бұрын
Have you tried the azure 5050s? I know they are only 5 inch but man they feel good on a light 5.5 inch.
@TimmyRC
7 ай бұрын
I have not
@chrisbee5481
Жыл бұрын
Have you tried the gemfan 6032? Those 6" tri blades you tried herr are pretty low pitch. The k2 prop has quite a high pitch. Personally I have a hard time tuning 6" bi blades.
@TimmyRC
Жыл бұрын
I have not, but I have a feeling the 3.2 pitch probably wouldn't be fast enough for me. Tuning 6 inch twin blades is slightly harder, but I haven't a single tuning issue with 6 inch twin blades since rpm filtering was introduced.
@chrisbee5481
Жыл бұрын
@@TimmyRCjust give the 6032 a try. I own and tried every 6" prop and looked for your advice here as well. Those hq you tried and DAL are really low pitch
Пікірлер: 24