I fitted gas supports with struts downward, then just lifted up and down like Umair said and it worked, thank you Umair
@AG-qo5fq
4 жыл бұрын
Thank you for the marvellous tip! Just go on top of mattress one at each side and at same time lay down! It worked for us! The Gas piston you put it in wrong way.
@umairkhan5157
7 жыл бұрын
I was having the same issue and here is what you want to do; 1) Assemble the bed according to the guide which is given and assemble the struts as you normally would. 2) once finished assembling Place the mattress on top of the mattress support frame while its upwards/Tilt. 3) After putting the mattress wait for 15-30 min. then Push the frame up really hard and pull it down again HARD (don't worry it won't break) keep repeating it until the struts are down. Note: the struts has gas trapped inside so it needs some sort of HEAVY and even weight on them. Hope it helped :)
@zedits1307
7 жыл бұрын
UMAIR KHAN thank you!
@umairkhan5157
7 жыл бұрын
Zainub Khan my pleasure
@tjnadah
7 жыл бұрын
dude struggled with this for 3 years!! quick search today and see this and has totally sorted it thanks so much I love this global village! best wishes
@robertthompson3741
7 жыл бұрын
Yeessss. Thank you!
@audreymles
6 жыл бұрын
UMAIR KHAN THANK YOU SOOOOO MUCHHHH!!!!!!!!!
@DJBeckert
7 жыл бұрын
To anyone else struggling, see Umair Khans comments with instructions. This actually works! I thought my bed was faulty until I read the comment.
@snugglepuzz007
6 жыл бұрын
Hi I had the same problem with my bed for ages and first you need to put the bigger end at the bottom then with the mattress on top you need to pull it down but have someone on the other corner pushing it down at the same time firmly and not to fast then it should just go. I tried many times to do this on my own and could never get it working by myself so I think when it’s pushed down it needs to be level in order to work 👍🏼 good luck
@auroragold799
6 жыл бұрын
It was sooo hard trying to get this bed down but all i did was put the mattress back on top of it told my 100 pound sister to lay on it went to the foot of the bed and pushed it down and it went down...it workd so perfect and easy
@seghechannel177
7 жыл бұрын
I watched your movie and I have the same problem. What did you do at the end?
@caroleburrell3040
3 жыл бұрын
Hi if you are having this problem with your bed, put the pistons on the bed have one person either side of the bed and push it down together in the middle of the bed, do this 2 or 3 times then you should be able to do it yourself from the bottom
@DunePanda
2 жыл бұрын
the strutts are pre charged to counter the weight of the matters and the frame. so once you have it installed. you need to release the pressure just enough so it lets the mattress down. it will be at a float point so you can lift the mattress again with less effort.
@mathsdebater
8 жыл бұрын
Hi Edgar, Did you manage to get this to work? Thanks for posting the video. We had the exact same problem as you were having with the struts - where it did not move in and out. But, we managed to fix it yesterday. We initially thought the struts werent lubricated correctly but we took it to the local hardware store, the guys placed the struts in a metal device. Picture two metal plates with a lever to turn which moves the metal plates closer together. Its a basic device and most hardware stores should have it, its nothing complicated. The guy at the hardware store placed the strut between the plates and turned the lever which put quite a bit of pressure and the strut ended up moving inside. After this, I attached it to the bed as you did and with a bit of force the bed moved up and down. I dont think you can move the strut with your hands, it needs a lot of pressure, especially since you are using it for the first time. I think the problem is that the struts stay in stock for a long time and need A LOT of pressure to move it inside and outside. I also think thats why the youtube link you posted below helped some people, once you attach it to the bed and you put a lot of pressure on the bed the angle at which you are applying pressure adds a lot of force to move the strut inside and outside. Hope you managed to sort it out. Good luck!
@ewetubaful
8 жыл бұрын
Ok, I had a similar problem, skin went to the local bed showroom to see how they had one set up. I put the Pistons the other way round on mine, and the best advice I got was to stand at the foot of the bed in the centre, then pull down (took a bit of effort the first time) - works fine - hope that helps.
@ik-yn3zo
8 жыл бұрын
Thank you so much it worked. :-) :-) :-)
@mm7184
8 жыл бұрын
you are an absolute legend for this comment.. had taken me weeks to get this working and not til I seen your comment did I get it working
@michellearcher2922
8 жыл бұрын
This really helped.... Thank you it worked for us :-)
@martinnona
7 жыл бұрын
Great!! Worked me also 👍
@barryholmes4714
6 жыл бұрын
Thanks so much ours was stuck also took your advice after seeing this video heyy presto it worked a treat after hours of head scratching 💪👍
@valentinnikolov793
2 жыл бұрын
Edgar Lorenzo, just to ask you the way the bed is, did you get any troubles with the frame bending due to lack of enough / sufficient support? Thank you!
@crazyaadil
7 жыл бұрын
Once the bed is fully assembled, push HARD with one person over each piston with a little momentum and it will move down
@AG-qo5fq
4 жыл бұрын
Thanks for the amazing tip.
@mingogaming338
3 жыл бұрын
I'm about to do it, it better work or I'm gonna loose my brother
@jodele25
2 жыл бұрын
Merci beaucoup, en effet il a fallut pousser fort la première fois
@fais6964
3 жыл бұрын
I did read there is a device u can get to release some gas from the gas spring, as too much pressure in spring at moment. You Place the small device on top of the spring and press to Release gas. But a lot of comments below saying just put mattress on top then worked ...I’m not sure will be enough to just do that but I’ll try.
@berthedoue7106
Жыл бұрын
Merci beaucoup Edgar 😊😊😊
@youtubemoderator9944
2 жыл бұрын
Thankyou so much for all the comments they helped me so much. I thought mine were broken but they wasnt. Thanks people xx
@E-glloriadeo
5 жыл бұрын
Does Hydrolic bed need some gas?
@robesco2945
4 жыл бұрын
How did you build the frame buddy I got the same problem too it's bull shit
@metratone5
5 жыл бұрын
Well I'm grateful for the video because now I def won't be purchasing. Hope you for a replacement that worked eventually.
@Saria_89
6 жыл бұрын
Had same problem, you just need to pull down in the middle with force when the mattress already on the bed on an incline, it's meant to be hard so it doesn't fall on you when you're under there... It seems like it's gonna bend or break but I was reassured by a customer service rep at Tommy Swiss that it wouldn't, but if it did they'd replace it, as that would mean it was faulty he said. It worked :)
@spencerstorey8686
3 жыл бұрын
My hero
@adewunmiaderinsola3178
3 жыл бұрын
Oh my,I can't thank you enough had this problem just now,and it worked...God bless you!!!!!!!
@Kumerinho
3 жыл бұрын
Saria MVP
@amirahachache4183
2 жыл бұрын
Thank you soooo much 🙏🙏🙏 it worked 🎊
@AR-ou7rl
2 жыл бұрын
WTF thanks from germany its still works Thank you !! 😍
@jojeysocute
9 жыл бұрын
I bought double bed gas lift from Ozsale as well. And got the same problem. I sent report twice and got replacement but still didn't work i'm about to give up.
@edgarlorenzo4653
9 жыл бұрын
Same here. I just gave up.
@edgarlorenzo4653
9 жыл бұрын
Hi Jeaw, a fellow youtuber Vineet Agarwal sent me a link that may work for you kzitem.info/news/bejne/rpmH3JOBo5eVdYI
@residentialremodellingbyfa374
8 жыл бұрын
+Jeaw Joy Same with me too here in India .. I am a Interior designer & contractor .... we should request the company to send in their trained professional instead of stupid DIY always
@smgaming162
5 жыл бұрын
I have the same problem I csnt push my bed town.. sitting on floor 😂😂😂 had to look for something and I cant lower the God damn bed.m 🤬
@smgaming162
5 жыл бұрын
Bro I no m to late but those who don't no yet.. grip on both side.. push down gently and it will be ok.. hahaha I just did that.. I was scared i might break it.. but dreams company show show to do it in KZitem.
@deniseadams1707
7 жыл бұрын
I have same issue also the hydraulics are bent so I cant even fit them, cheers Groupon !
@whos_ted2556
3 жыл бұрын
you have to push hard that's what I did for mine and it worked perfectly hope this helps
@MrGschwaller
8 жыл бұрын
dude the struts are upside down. Flip them, The valve to release the gas only works one way.
@josephhorton85
6 жыл бұрын
Not really and these are not struts. You need the fatter side on top to lube steel rod. The lubricant is right where the steel rod pushes thru. It's like making love to a thick girl, the right way is her on top to keep the moving parts lubricated.
@peterjalal4449
5 жыл бұрын
If you put your body wait on the bed the bed will come down. I t worked with my bed
@DripdropBrewing
3 жыл бұрын
Yes had same problems and he's got it them on the wrong way lol
@loictuckey6106
7 жыл бұрын
brilliant.
@tre6251
8 жыл бұрын
The problem is the inverted hydraulic piece. Minor set back.
@NotQuiteFirst
5 жыл бұрын
wrong
@sserddab
7 жыл бұрын
We bought one as well, rubbish, we got taken.
@artfte
3 жыл бұрын
3 weetabix in the morning !!!
@samiulrahman7467
4 жыл бұрын
I recently purchased this bed. Put it together myself. I thought I wasn't able to push it down thinking it would break but infact you need to put a bit of force into it and the bed will push down. After the first go itll be easier. If you dont pull up the bed after awhile the highdrollocks will get stiff so just be aware of that.
@hedahayden
7 жыл бұрын
We have same trouble, Eat pizza then push harder
@danielzhu1261
4 жыл бұрын
I bought three of them , had the same problem! It’s the stupidest design. I have to return to them( still waiting to be collected) . Don’t make a mistake to buy it!!!
@kwigybomanboy
9 жыл бұрын
I'm having the same problem. Did they give you a solution?
@edgarlorenzo4653
9 жыл бұрын
They sent the replacement, but still didn't work. Something sounds not right with this!
@edgarlorenzo4653
9 жыл бұрын
kwigybomanboy try this kzitem.info/news/bejne/rpmH3JOBo5eVdYI
@tarikkarabay8777
8 жыл бұрын
Hello just seen the video you probably sorted it out by now but if not you need a lower force gas strut, they sold you a high force gas strut for a heavy mattress and your mattress is much lighter than expected as I can see. So I am guessing you need 1000N gas struts and should be sorted.
@davidmathews8697
7 жыл бұрын
On duh fat sie of the gas struh on duh top of duh base should be an Arren key socket. Put duh arren key an open it an crose it quick. Keep doing until you be able to bring it down. Easy.
@cebanasdima
Жыл бұрын
You just need to push harder, together with someone from both sides, and it should work if the system is not deffect.
@ReuterL
Жыл бұрын
Do not recommend. I tried that, was a disaster. the metal bar bent. you need a mattress on top for even heavy weight to not destroy the bed.
@JudyNunya
8 жыл бұрын
is it upside down?
@tarikkarabay8777
8 жыл бұрын
Actually he mounted them the correct way, this way the oil inside will lubricate the inside parts and the struts will have a long life.
@tobyparsonsmedia5805
8 жыл бұрын
go to each side and push up and down untilp
@makeupforever261
8 жыл бұрын
The solution is u need to fit the bed put mattress then it works
@fais6964
3 жыл бұрын
You Don’t need to release some gas pressure from the spring ?
@theartofexcellence
2 жыл бұрын
@@fais6964 no, you don't need. You just have to press down firmly from the middle of the bed and it will go down. After 2-3 times opening it, it will work easier.
@SeanyGunit
8 жыл бұрын
Dude, you have the rods the wrong way up. The fat end goes on the bottom hinge not the top near the mattress.
@josephhorton85
6 жыл бұрын
Your wrong dude, you want the fat end on top so that the shock doesn't dry out the seals. This is not a car strut.
@leonardokostic8893
Жыл бұрын
Just push down hard with hard force
@ReuterL
Жыл бұрын
Do not recommend. I tried that, was a disaster. the metal bar bent. you need a mattress on top for even heavy weight to not destroy the bed.
@ryanhosier8785
8 жыл бұрын
I have same problem
@coralinian
4 жыл бұрын
Ryan Hosier I have also the same, what did you do?
@TonyaPinkinsDivaDivu
7 жыл бұрын
Im having the same problem and IKEA customer service is USELESS
@umairkhan5157
7 жыл бұрын
Tonya Pinkins see my comment above.
@angiiedhars
4 жыл бұрын
@@umairkhan5157 Where is your comment? I have the same issue with the same bed here :(
@marekpszczolkowski2587
8 жыл бұрын
what you have to do pusch harder, don't wory you not braked down.
@langowski007
6 жыл бұрын
Marek Pszczolkowski Część. Ale jak mocniej sie docisnie to czy nie wygnie sie ta metalowa przykrecona do ramy łóżka konstrukcja? Z materacem ciezkim probowac najpierw i pchac mocno? Pozdrawiam.
@andreasmith4036
Жыл бұрын
Please record when child free
@ewetubaful
8 жыл бұрын
So I, not 'skin' :-)
@1993Revhead
7 жыл бұрын
Don't seek out to youtube mate, email the damn company themselves.
@Simracer0
3 жыл бұрын
omg
@cyho4559
6 жыл бұрын
I feel not comfortable to watch this video, kids should not be around, you not think of your kids safety🤕
Пікірлер: 116