COMMENT: What are your thoughts on the new 4K Fast Finish?
@joshg218
2 жыл бұрын
This wasnt 4K fast. You need to properly put the teeth under the 4K for it to have traction in the back of the lane. You turned it into a neutered 1500grit surface ball so it was too early but not smooth enough in the back end to get that quick traction.
@clowny2396
2 жыл бұрын
I don't have a spinner; however, I took several pads from 360 to 4000 grit to my Hy-Road by hand and the last two were wet. Used the ball on my next outing for a few frames. Wasn't impressed. Took a 3000 grit pad to it and tried it out again. Whoa! Nice mid-lane reaction and finish. Lots more miss room. Liked it...
@douglaskonas2852
2 жыл бұрын
Yeah was gonna comment that hitting a polished ball with 4k is NOT the same as 4k fast. That polish is still in the pores.
@jefftennant218
2 жыл бұрын
I don’t like that they went away with the polish. I don’t believe that has anything to do with them being too soft. I don’t think it’ll stop being from buying storm balls. People can try it at 4000 and if they don’t like it they can always take it to 1500 polished.
@douglaskonas2852
2 жыл бұрын
@@jefftennant218 Storm released a vid showing how the polish on their balls was effecting the needle on the durometer. So while it does not make the ball softer, it effects the measuring device used to test hardness.
@earthwormjim7310
2 жыл бұрын
I have a black widow 2.0 that I tried the 4K fast with and I did like it. Cleaner than the box finish and still controlled strong down lane finish.
@prestonkovarsky4972
2 жыл бұрын
I just bought the RSTX2 to add a big asym pearl to my bag and it came with the 4K fast finish. I love this ball. I can use it all night during league with no problems and only have to move a few to the left. Favorite ball in my bag. Considering buying another just to store it
@soobie23
2 жыл бұрын
Fast 4K is not simply 4K. need to take to 360, then 1K, 2K, 4K. There is a video on Storm's site.
@pokiis3108
2 жыл бұрын
may as well call that slow 4k
@teddybruckshot1188
2 жыл бұрын
@@pokiis3108 the “fast” part is supposed to refer to the transition of the ball but I agree it’s clearly confusing - even to pro shop owners!
@soobie23
2 жыл бұрын
@@caribbeanobsidian9119 corrected.
@shanewright3860
2 жыл бұрын
This is incorrect. You can take a 4k tru cut pad and hit it dry or wet and get that 4k. Im a staffer for CTD and they make great products. Or youtube CTDs youtube page and see the video for yourself.
@wabbit1699
2 жыл бұрын
4k fast means that they go from 500 to 4k without skipping a pad, so 500-1000-2000-3000-4000. As for what i think about it, I haven't tried one with that specific surface. Generally I have always done my own polish job with Step Two so that I can reproduce it compared to what SPI used to put on the ball. That said, if it shuts USBC up, then I'm all for it.
@theinsaneshecklador6598
2 жыл бұрын
Actually I think they said to start all the way down at 360.
@collinbrummund5925
2 жыл бұрын
They do start with a 360
@caribbeanobsidian9119
2 жыл бұрын
Good day, It took me a moment to understand the process. It's a little confusing right. The process starts from using a 360-grit pad. There's no 3000-grit pad used as it is not used in their finishing process (according to their resurfacing guide from 2012 and before: www.stormbowling.com/downloads) except to finish the ball at 3000-grit. Here’s Storm’s video explaining 4K Fast: kzitem.info/news/bejne/ua9rn5-amqOLao4 The finishing process is mentioned from minutes 1:18-1:25 and again from 7:00-7:18. When Alex says: "We're not skipping any grits in between... We're literally not going to skip any steps..," it's to be understood "contextually" not "literally." I hope this helps. Storm's 4000-grit finish goes from: 500-->2000-->4000 Storm’s 4K Fast goes from: 360-->500-->1000-->2000-->4000.. (again, no 3000).
@Dainslaif
2 жыл бұрын
Yeah, they call it "fast" because when it hits the dry, it changes direction "faster" than their normal 4000 ball finish (IE; more angular) due to being a bit more polished as a result of the full procession of grits.
@theinsaneshecklador6598
2 жыл бұрын
@@Dainslaif Interesting.
@josephcalderoni5792
2 жыл бұрын
I love the look of 1500 polish. So I will still sometimes ask my pro shop operator to polish my Zen, Phaze 4, and Hyped Pearl on the spinner! Looks clean and sharp coming out of the bag, and gives me confidence. Oh BTW, it's also nice to see bright lighting and close-ups on Jungo once again, like vids from a couple years ago. Lucky 9 looks great that way too. Cheerful looking!
@xenogears5177
2 жыл бұрын
Good stuff guys. I just wish you would've taken two separate balls with factory 1500 grit polished and factory 4k Fast (not just sand it yourselves) to compare the two balls.
@anthonydorazio9650
2 жыл бұрын
That's exactly what I thought. 👍
@zVask
2 жыл бұрын
1500 polish is by far my favorite polish, looks like all the new pearls I buy from storm Im gonna have to change the surface to 1500 polish
@anthonydorazio9650
2 жыл бұрын
Hey Vask I'm with you I got two Zens,Axiom Pearl,Phase 4,Altered Reality. Mine are polished after every use. I picked up my Zen Soul Friday and as my guy was drilling it I said got any 4 k fast he did uc2 dude not even close to 1500 polish.
@robertkaczynski8649
2 жыл бұрын
RST X-2 was not banned but the UFO Alert was. That being said my son replaced his UFO Alert with the RST X-2 with 4K Fast and loves it for both sport and house shots. Note it was drilled as strong as possible to come close to what his UFO Alert did (2 handed righty)
@BigJim5754
2 жыл бұрын
I have the Alert which I liked and I had my shop do the Storm instructed full 4K fast 5 step process from 360 pad to 4000 and I like it even more. Its a subtle difference but makes the ball a tad smoother and almost makes the ball more versatile from the fresh to alil later in the blocks then the polish.
@teddybruckshot1188
2 жыл бұрын
Super helpful. I hadn’t been paying attention - got my new soul last week and wondered why everyone on KZitem had twice the shine!
@lumberlikwidator8863
Жыл бұрын
Slow ball speed here, having trouble on the wet/dry patterns on synthetic lanes. Just took my Roto-Grip Hustle Hybrid down 1500-2000-3000-4000. Looking for more room right and left of target. Can't wait to give it a try next week.
@notonyourlife7939
2 жыл бұрын
Why no more polish? I'll take "Because they got tired of being the USBC's whipping boy" for $200, Alex...
@Matt_Holcomb
2 жыл бұрын
Me as Alex.. "In 2022 what bowling ball company was repeatedly harassed during the USBC Nationals?"
@remoevans7847
2 жыл бұрын
I’ll take unfounded conspiracy theories for $500
@squiggy102
2 жыл бұрын
how do you do this comparison without looking up what fast 4k means
@squiggy102
2 жыл бұрын
its not just at 4k its going up 1k 2k 4k in a row so there is a more consistent cover. doing it this way will get you much closer to the polish than just knocking of the shine with a 4k spin
@pokiis3108
2 жыл бұрын
@@squiggy102 no a 4k slap will get you closer to polish, r u trolling?
@caseymaxted6279
2 жыл бұрын
I haven’t had a ball with 4k fast but in the shop I have noticed a few balls come in and they are really dull. Then the next week, the same type of ball comes in and it’s shinier out of box. I have a feeling there will be some inconsistencies in the 4k fast finish. I do hit my pearl balls with some surface to begin with so I think I’ll like the 4k fast.
@jeremysmallwood8631
2 жыл бұрын
x1 and x2 are my go to first out of the bag currently
@nobobypartiallyimportant1142
2 жыл бұрын
I stopped using polish on everything but my spare ball and even then, it is for looks. Being a mostly rev-dominant player, I frequently use a 3000 pad on my symmetrical solid balls as a psuedo-polish
@deliafg
2 жыл бұрын
Here to watch the video as instructed by my BH
@enigmazero8624
2 жыл бұрын
From what I can tell, 4K Fast essentially means 4K without skipping any grits on the way up. Seriously. That’s what Storm says. That’s how I’ve been sanding balls for 20 years and i always just called that 4000 grit. So I guess that means “regular” 4000 grit is actually “4K Lazy” 🤷♂️
@caribbeanobsidian9119
2 жыл бұрын
Good day, It took me a moment to understand the process. It's a little confusing right. There's no 3000-grit pad used as it is not used in their finishing process (according to their resurfacing guide from 2012 and before: www.stormbowling.com/downloads) except to finish the ball at 3000-grit. Here’s Storm’s video explaining 4K Fast: kzitem.info/news/bejne/ua9rn5-amqOLao4 The finishing process is mentioned from minutes 1:18-1:25 and again from 7:00-7:18. When Alex says: "We're not skipping any grits in between... We're literally not going to skip any steps..," it's to be understood "contextually" not "literally." I hope this helps. Storm's 4000-grit finish goes from: 500-->2000-->4000 Storm's 4K Fast goes from: 360-->500-->1000-->2000-->4000.. (again, no 3000).
@enigmazero8624
2 жыл бұрын
That makes it seem even more ridiculous. How much different could the actual final surface value possibly be between “regular” 4000, 4K Fast, and my interpretation of “real 4000” which includes the 3000 step?
@caribbeanobsidian9119
2 жыл бұрын
@@enigmazero8624 Maybe not as big of a difference, right? But at least you'd potential save a pad.
@Juan2btall
2 жыл бұрын
It’s pretty nice I have a Dark Code with the 4K fast finish. I like it so far 👍
@eddyyoder457
3 ай бұрын
I just got a ball with storm reactagloss finish and I'm not sure how I feel about it yet it's my first time with a ball like that 😊
@bobgomavitz1330
2 жыл бұрын
True 4K Fast is a 5 step process as per storm, not just hitting it was a 4K pad. I’m early into the vid so maybe this is talked about later on
@BigJim5754
2 жыл бұрын
same thought, full process is def different from just a 4000 hit
@krazekilla224
2 жыл бұрын
4K Fast, according to the storm video is sanding 360, 500, 1,000, 2,000, 4,000. The term FAST is used to describe the transition of the ball, meaning is a fast or quick transition. The explanation comes in around 8 minutes of this video kzitem.info/news/bejne/ua9rn5-amqOLao4
@butchcoolidge3261
2 жыл бұрын
I’ve been hand applying compound on my pearls for a couple years with good results. I know Radical used it on some of their balls. I prefer it to polish, and it seems to last longer. I’d like to see you guys try it, and give your opinion. Thanks
@JiuJitsuWrestlingStriking
2 жыл бұрын
My rhino from brunswick came with compound and polish and its definitely all worn through. When my pyb star and orbit spinner kit for 3/8's drills comes in this week I'm going to completely resurface to same grit then compound and polish. Should be a completely fresh ball again but with my current technique I cant wait.
@butchcoolidge3261
2 жыл бұрын
@@JiuJitsuWrestlingStriking Maybe try compound first and see if you like the reaction? It will be super tacky and shiny. I think you will be pleasantly surprised by the reaction.
@drakedbz
2 жыл бұрын
Note: according to Storm, this is not a typical 4k finish, they do every grit from 500-4000 without skipping, which they say is supposed to give channels for the oil.
@caribbeanobsidian9119
2 жыл бұрын
Good day, It took me a moment to understand the process. It's a little confusing right. The process starts at 360-grit. There's no 3000-grit pad used as it is not used in their finishing process (according to their resurfacing guide from 2012 and before: www.stormbowling.com/downloads) except to finish the ball at 3000-grit. Here’s Storm’s video explaining 4K Fast: kzitem.info/news/bejne/ua9rn5-amqOLao4 The finishing process is mentioned from minutes 1:18-1:25 and again from 7:00-7:18. When Alex says: "We're not skipping any grits in between... We're literally not going to skip any steps..," it's to be understood "contextually" not "literally." I hope this helps.
@pokiis3108
2 жыл бұрын
Is that not a typical 4k finish, you noob
@BowlChad
2 жыл бұрын
Jungo's back!
@willjames6437
2 жыл бұрын
Was Barks at the Arlington PBA Finals event in Washington State? I swore I saw him standing in the background standing up during Dom Barrett’s matches.
@ryanreid5859
2 жыл бұрын
Yes he was
@donkeydiehard879
2 жыл бұрын
Box finish got ridiculous with polish. Was clearly more for shelve appeal than for good ball reaction. I always broke the polish and/or put my own surface on it. Think balls like the Zen and altered will still be better on house with polish. After trying many different combinations, I find that 500, 1000 and power house polish is the best way to go for polish.
@user-cy1ei7kf1i
5 ай бұрын
I have a rstx2 but it's to sharp off the pattern and uncontrollable do u think 1500 without polish works for me we both stand in the same spot and the revs are just the same
@StephRenee812
2 ай бұрын
I jjlust for one and I use it as a spare ball.. it goes very straight. I'm a higher tilt 20° and 30 rotation, 13 to 15mph on screen. Layout is 30×5½x35. Maybe I should had gone with a shorter pin to pap? Still trying to understand what I should be using and my sum ratios for layouts. I have been using zen soul at 1500 grit or sometimes 2500 depends. I tried using my honey badger Intensity pretty straight as well as my all road. Haven't used my iq tour edition or outer limits hybrid. Going to try to knock the shine all and see if that helps like it does my Zen soul?help
@neilkaplan1433
2 жыл бұрын
I'm about to buy the RST X-3 with 4k fast
@kilbane6387
7 ай бұрын
So I’m seeing different answers. Do you start with 360 or 500 or 1000 grit?
@markgarrison6035
2 жыл бұрын
I just purchased the zen at nationals and left it at the 4K finish big mistake for me in singles and doubles I could not get the ball to get through the heads I will differently be taking it back to polish
@mireally
Жыл бұрын
Have you tried using the CTD P5000D grit pad on this ball and then seeing what kind of reaction you get?
@skalamaz3
2 жыл бұрын
I find this hard to believe that's why they were banned but ok maybe true. My Electrify pearl is 4k sanded and the solid which was banned is polished I believe.
@jeroldserrell9746
2 жыл бұрын
I went 1000 grit then step 2 on my Wolverine Dark Moss and my Infinite Physix
@Brent-Tanabe
2 жыл бұрын
I think you got the wrong ball pic in the banned balls part. The X2 wasn't banned. The UFO Alert one of my favorites was the one banned.
@scottythompson940
2 жыл бұрын
Cool video talk tech bowling Jr pro shop
@Reece634
3 ай бұрын
Talk tech technically talk bowling ball techs techy talk bowling talk about tech technology talk tell me about talk tech
@user-cy1ei7kf1i
5 ай бұрын
I have a rstx2 but its uncontrollable do u think putting the 1500 no polish will work cause i throw the same way u do my ball is to sharp off the spot and hooks violently on the back and runs on the nose everytime
@joeanderson9267
2 жыл бұрын
I use CTD pads 5000pd and their polish.
@brianf7405
2 жыл бұрын
Odd question but where did you get that jacket that Ryan is wearing in the intro part? We’ve been looking for those types of jackets for our coaching staff for high school bowling during the winter…thanks in advance!
@jrproshop
2 жыл бұрын
just our local shop one of our league bowlers owns. look up storm tech
@angelasanford4505
2 жыл бұрын
my new ZEN was 4k fast and it was to much for me so we took it to 2k and its way more managable now
@dfresh933
2 жыл бұрын
Wondering if they did any testing to see if maybe the Storm polish is causing a softening chemical reaction to some of their cover stocks. That's the reason for fast 4k.
@jrproshop
2 жыл бұрын
yes
@dfresh933
2 жыл бұрын
@@jrproshop So you can shine a ball, probebly make sure at some point to remove the polish and not let it set into the ball for long period of time.
@richardgandia5700
2 жыл бұрын
What a great video I have to say thank you for your understanding of the new finish process. I have the new Zen Soul 4k but I just don’t understand what it wants to do. I have made numerous moves to get the ball to give me something to work with but all I continue to get is over/under from the same spot. Move and get more of the same. Any suggestions?
@TuPapaChief
Ай бұрын
It is not intended for dry oil condition. It needs plenty of oil
@dougstein7226
Жыл бұрын
I don’t care for the 4K Fast, I rolled it with 4K and did not shoot very with it but as soon as we moved it to 1500 and shine it was great
@fiveboardstotheleft-bowlin2683
2 жыл бұрын
Hustle Wine with 4k fast, solid so far.
@sswolfhunter9967
2 жыл бұрын
The 4k fast finish is pretty good and do u have keep your bowling ball polish if u had to
@thatloudCG5
2 жыл бұрын
I liked the shine better. I tend to do stupid stuff with polished finishes like idk, 360 grit then shine it. It works though! 😂😂😂😂
@jimk9290
2 жыл бұрын
It's just a different finish option. If it keeps the balls in specs, go for it.
@Popsplace42
2 жыл бұрын
Ummm, a polish is not a product that stays on the ball. It’s a compound that sands it with a buffing pad. Why do bowlers think polish is a coating on the ball?
@Popsplace42
2 жыл бұрын
Let’s say you sand the ball to 1500, now you polish it, it’s not 1500 anymore but much much finer. Hence the shine.
@miketiegs1094
2 жыл бұрын
It was the UFO Alert that was banned from USBC national competition not the X2
@jasonsmith3537
2 жыл бұрын
Please don't say "moist" while I'm eating and watching thank you.... kidding. I may do up all mine to 4k fast actually. Thanks for the vid guys.
@jacobbonesteel8061
2 жыл бұрын
Does it hurt the ball to change the surface like that? Since it seems like you’re sanding the ball, I feel like after a while you’re going to run out of surface.
@fiveboardstotheleft-bowlin2683
2 жыл бұрын
It's a common practice to resurface balls to achieve different reactions on different oil patterns. Eventually the balls get old and lose their bite or you find a ball that matches your game better and move on from the old ball.
@tushanator
2 жыл бұрын
Rst x2 wasn't a banned ball. It was the ufo alert .
@andrewfoglestad3641
2 жыл бұрын
RST x2 wasn't on the 6 ball soft ban list you're missing the UFO Alert
@andrewbecker3592
2 жыл бұрын
What about 4k fast WITH polish for funsies
@allenthomas914
2 жыл бұрын
Can I sand my pearl polished ball do I need to do it dry or wet?
@michellewest6804
Жыл бұрын
According to Storm - The Fast in 4K Fast stands for - Fast Reaction - coming off the oil pattern to the dry.
@jeremysmallwood8631
2 жыл бұрын
u like the 4k better then polish on the x2
@wms702
9 ай бұрын
That 1500 No Polish hits like a turd.RST X-2 Thrives @ the original box finish ,1500 Polished.(Providing maintenance is routine)
@willjames6437
2 жыл бұрын
4K fast - 500, 1000, 2000, 3000, and 4000. The process is designed to have a similar RA value, as it gets the surface extremely smooth - under 5 RA while the 1500 polish has about a 3 RA value. 4k fast should be a little smoother, but less sensitive than 1500 polish finish.
@caribbeanobsidian9119
2 жыл бұрын
Good day, It took me a moment to understand the process. It's a little confusing right. The process starts at 360 grit. There's no 3000-grit pad used as it is not used in their finishing process (according to their resurfacing guide from 2012 and before: www.stormbowling.com/downloads) except to finish the ball at 3000-grit. Here’s Storm’s video explaining 4K Fast: kzitem.info/news/bejne/ua9rn5-amqOLao4 The finishing process is mentioned from minutes 1:18-1:25 and again from 7:00-7:18. When Alex says: "We're not skipping any grits in between... We're literally not going to skip any steps..," it's to be understood "contextually" not "literally." I hope this helps. Storm's 4000-grit finish goes from: 500-->2000-->4000 Storm's 4K Fast goes from: 360-->500-->1000-->2000-->4000.. (again, no 3000).
@ItsKeelo
2 жыл бұрын
I didn’t think the RST X2 was made illegal in certain competitions?
@snikab
2 жыл бұрын
The UFO ALERT was the ball that was semi-banned
@jasonsiegel3869
2 жыл бұрын
Uhh.. I didn't read everyone's post's.. But just in case no one said anything.. At one minute and 4seconds Ryan mentions/shows 6 balls from the Storm/Roto-Grip/Global 900 line-up. I believe he got one wrong... The RST X-2 should have been a UFO Alert.. That's all.. Thanks for the great vids, Keep it up!! Jason
@cwagner4704
2 жыл бұрын
I know it had nothing to Do with the vid, but those white socks are killing me.
@jeremysmallwood8631
2 жыл бұрын
I didnt know the x2 was banned
@GraysonandJoey
2 жыл бұрын
It’s not
@michaelmorgan5546
2 жыл бұрын
The 4K fast is the process is 1k, 2k, 3k to 4k. They use to skip sand 500, 1,500 to polish
@caribbeanobsidian9119
2 жыл бұрын
Good day, It took me a moment to understand the process. It's a little confusing right. The process starts at 360 grit. There's no 3000-grit pad used as it is not used in their finishing process (according to their resurfacing guide from 2012 and before: www.stormbowling.com/downloads) except to finish the ball at 3000-grit. Here’s Storm’s video explaining 4K Fast: kzitem.info/news/bejne/ua9rn5-amqOLao4 The finishing process is mentioned from minutes 1:18-1:25 and again from 7:00-7:18. When Alex says: "We're not skipping any grits in between... We're literally not going to skip any steps..," it's to be understood "contextually" not "literally." I hope this helps. Storm's 4000-grit finish goes from: 500-->2000-->4000 Storm's 4K Fast goes from: 360-->500-->1000-->2000-->4000.. (again, no 3000).
@michaelmorgan5546
2 жыл бұрын
@@caribbeanobsidian9119 I have been resurfacing like this for a number of years, not knowing that was what I was doing...lol It wasn't until I heard of Skip sanding that I even attempted that. For the most part, I still resurface most of my stuff the Fast way I guess...lol
@jerryalexander8803
2 жыл бұрын
I was never a fan of the 1500 polish, I can't wait to ask my pro shop to put 4k fast on my nuclear cell, I think it's going to be a totally different bowl, in a good way
@angrywally4087
2 жыл бұрын
Jungo Are you going Sand the RST X-2
@cameronmcisaac1384
2 жыл бұрын
The X2 was banned??? I thought it was the UFO Alert
@jdizzlef83
2 жыл бұрын
X2 is safe. It was actually one of the replacement options for the Sinister 6
@cameronmcisaac1384
2 жыл бұрын
@@jdizzlef83 "the sinister 6" 😂
@jdizzlef83
2 жыл бұрын
@@cameronmcisaac1384 lol
@Ghettonasty1914
2 жыл бұрын
UFO Alert was banned not the X2
@peacefultv304
2 жыл бұрын
it was the ufo nt the x2 that was banned
@dougspry6278
2 жыл бұрын
1500 polish all day. Storm better figure out how to get polish back on balls without the hardness issue. Every other manufacturer has polished balls.
@jraustile2104
2 жыл бұрын
Rstx2 was not one ufo alert was the other one
@TheDoc73
Жыл бұрын
Am I the only one that wished they would've thrown polish on the 4K just for the hell of it?
@TheBigfoot1999
2 жыл бұрын
For over a decade now, if the ball I get is polished/compound out of the factory, I take that off before it ever sees the lane.
@colebradshaw1136
2 жыл бұрын
Just got a dark code in exchange for my ufo alert. Waiting to drill and throw it before making any changes but i’m assuming i’ll end up polishing it so it’s a similar asym ball to my ufo alert that i liked so much.
@Tcrror
2 жыл бұрын
The Dark Code, from everything I have seen, is an excellent ball. It's also very strong and controllable.
@chadsmolek7336
2 жыл бұрын
the dark code is probally the best ball consistently ive ever thrown in 40 years
@David.1517
2 жыл бұрын
The polish did not make the balls soft. The residue from the polish caused lower readings in subsequent tests. Watch the Storm video. They explain all of this. You did not adjust the surface of the X2 to 4k fast. All you did was 4000 after box polish. 4k fast is NOT a fast spin. 4k is a progression of abralon starting at a course pad, and progressing up to a 4k pad. This will create a different reaction with teeth underneath. Watch the Storm video on this too. They explain the process. I love your guys videos but if you would have watched the relevant videos Storm produced on these topics, you would have all the correct info about the use of polish and how it affects surface tests and what 4k Fast actually is.
@RebelKicks-mn4kc
2 жыл бұрын
Your 1500 grit no polish almost looked shinier than factory 4K Fast directly from Storm. If a ball comes out of the factory at 1500 grit, it will laser scan at 1500 grit. This is why I never use Abralon, because 1500 Abralon scans much higher than 1500.
@ikeyeet8312
2 жыл бұрын
so basically just polish them once you get them.
@JNickel9
2 жыл бұрын
All the 4K fast meant was from 350 to 4K without missing a pad in the steps
@caribbeanobsidian9119
2 жыл бұрын
Close, a 3000-grit pad isn't used in Storm's finishing process except to finish at 3000-grit.
@JNickel9
2 жыл бұрын
@@caribbeanobsidian9119 I’m going by what Chad Said on the Storm Video.
@feddyvonwigglestein3481
2 жыл бұрын
The more seriously I took the sport, the less I even wanted polish on my balls anyway. If you need a cleaner reaction, why take a full-price or nearly full-price ball, then ruin its cover with polish? What's wrong with a cheaper ball that flares less? I know that's not what the manufacturers (and ignoramuses that think lower price = lower quality ball) want us to think, but it's how I personally see it.
@brandongoodman4116
2 жыл бұрын
I looking for free bowling balls
@nathanielfuentes5294
11 ай бұрын
Sad that you're making an informational video and don't know what Fast 4k is...
@LOGICNREALITY
2 жыл бұрын
these people need to start making solid colors, the tied dye stuff looks like what happens when kids mix different colors of playdough together hahhahahahahhaa. Ive been looking at old bowling balls on ebay, even if it makes me worse, I dont care. 200 plus for a ball, we should be able to pick better colors
@Dan-oi4kt
Жыл бұрын
All of this is way overthinking. All these different balls are just the manufacturers' way to sell WAY MORE balls with their marketing tactics and the bowlers just fall for it over and over again. Hilarious actually
@UncleSnottie
5 ай бұрын
"Harshly banned by USBC" seems an odd statement to make when a rule is in place and Storm did not adhere to it.
Пікірлер: 151