On his last day, my dad told me that I would have to watch a KZitem video to learn how to replace the throttle body on his Jeep. So thanks for this. You were a big help.
@FloridaJeepRides
3 жыл бұрын
Our pleasure- always happy to serve the Jeeping community
@blackychan8570
Жыл бұрын
Oh god wait, his last day on earth?
@wulfclaw4921
Жыл бұрын
Thanks, man ! Good instructional without all the annoying "music" or irritating wasted time !
@FloridaJeepRides
Жыл бұрын
Thanks- Jeepin it simple.
@BruceBernier-lg8fc
Ай бұрын
Don’t know why it took me so long to find it but thank you.
@FloridaJeepRides
Ай бұрын
Glad to help
@Ro3Go
Жыл бұрын
Changed out camshaft sensor and temp sensor on my 2011 JKU. Now waiting on the throttle body by mail and change it out. Have had occasional starting issues. Just when I thought I was done and rid of issues it was hard to start again when I drove around a bit. Waiting for the mechanic in me to find the issue before I take it to a shop. Thanks for the many videos. A fan!
@FloridaJeepRides
Жыл бұрын
We had some issues a couple of weeks ago with the red jeep again. It acted like no fuel or fire again. It's hard to take a Jeep on a trail ride when you don't trust it... Jeep life
@Ro3Go
Жыл бұрын
@@FloridaJeepRides Changed out a dead battery yesterday and now just waiting on the throttle body to arrive. Hope that’s the culprit and fixes things. Wish me luck! I’ll keep you posted.
@fausisantoso3660
5 ай бұрын
if a red indicator appears like lightning... the rpm can't be high... what's the problem
@richdatsun8755
3 жыл бұрын
I remove my throttle body on the 3.6 just to clean both sides good and alway new gasket. I’m amazed how fast they get dirty. Glad you got your issues fixed.
@FloridaJeepRides
3 жыл бұрын
Thanks for sharing. An easy way to clean out he flap.
@stevenritley4610
3 жыл бұрын
I have been chasing this same gremlin all over my wife's Jeep.
@FloridaJeepRides
3 жыл бұрын
For now it’s been doing well. Lots of new little things that did not cost too much. It’s running better and was due a tuneup anyway.
@lindawall498
3 жыл бұрын
This post has nothing to do with the current video, Cause I love all your videos period! But, some of my favorites are when I hear Randy giggling in the background. Her laugh is so contagious!
@FloridaJeepRides
3 жыл бұрын
She is a happy camper... Thats a good thing.
@felixgarciamedina5471
9 ай бұрын
I also have that issue, changed the Air intake sensor MAP sensor, Throttle Body, spark plugs and wires (plugs and wires about three months ago or more), also changed the gas pedal, about to change EGR and crank shaft sensor. I saw another video were they changed the power brake booster.
@FloridaJeepRides
9 ай бұрын
Most recently we have had issues with warm starting. I go to a store and it won't start for 30 minutes or so. It turns over strong but won't fire. It could be a gas vapor problem. Or Stuck injectors.
@felixgarciamedina5471
9 ай бұрын
@@FloridaJeepRides My mechanic called me yesterday, he narrow it down to the PCV and a hose. He is doing an extensive test later today, hopeful that is the fix in my case.🤞
@felixgarciamedina5471
9 ай бұрын
Issue was fixed, the hose was cracked and the rubber of the PCV was looking/feeling like plastic. PCV is located behind the coil pack.
@KarlLSnyder
Жыл бұрын
Thanks for your videos..i find them very helpful. I have several "ghosts" and "gremlins" I'm chasing right now. Changed my cam position sensor and am having occasional starting issues now.
@FloridaJeepRides
Жыл бұрын
We went through so many issues last year. We finally took it to a shop and they found a bad fuel pump and filter. After that it's been doing good. I must have changed every sensor that codes indicated.
@KarlLSnyder
Жыл бұрын
@FloridaJeepRides I've been reading through a plethora of threads on the subject in JK & Wrangler forums. I have yet to find a single thread or video pinpointing the issue. Lots of variables. Lol. One thread on the subject starts in 2020 and continues to be a problem into 2023! They replaced all the same parts you mention and many more. I'm just buckling in for the Jeep experience and plan on fixing and replacing for as long as I own it. Haha! Thanks again!
@obidave2
3 жыл бұрын
Wow. You made that look simple! Let us know if that fixes the issue!
@FloridaJeepRides
3 жыл бұрын
So far I have been driving it around and not getting any stalls or loss of power.
@johnmcwade222
2 ай бұрын
All that oil means you need to change the PCV valve, it’s letting to much oil in to the air intake.
@FloridaJeepRides
2 ай бұрын
Good advice.
@nathaneagle7005
6 ай бұрын
Hi Florida Jeep, I’m having issues with my 07 Wrangler JK rubicon 3.8L, I’ve replaced the cam position sensor, I’m getting codes for the egr valve and it’s going into limp mode, did replacing the cam sensor, egr sensor, throttle body and temp sensor solve your issues? Thanks in advance
@FloridaJeepRides
6 ай бұрын
I changed them all... some twice. I ended up taking it to a shop and they did a fuel pressure test and discovered an issue with the fuel pump. It is in the gas tank and was messing up stuff up line to the injectors. Today, I changed the alternator. It never ends with Jeep and I would have it no other way.
@cowlumbus
5 ай бұрын
So...with all the things you have done, did this fix it? We are going town the "throwing parts at it" rabbit hole ourselves!
@FloridaJeepRides
5 ай бұрын
That was one of the last things I did, we took it to a shop last summer and they tested the fuel pressure... there was a problem with the fuel pump as well. The thing that was frustrating is the trouble codes kept changing.
@frankielin2
3 жыл бұрын
Did your traction light ever come on then reduce your power? I've had that one. Replaced the camshaft position sensor. Fixed then a couple of months later it happened again. It has been taking a longer to start. It's currently at the jeep place racking up lots of charges. I was at my breaking point trying to figure it out. They put a throttle body on it today. Still not sure if that's gonna fix it. Hopefully it does. Has it still fixed your problems?
@FloridaJeepRides
3 жыл бұрын
It's been running good after all the changes. We took it to Croom on Saturday and had no issues.
@charbelkaram1119
2 жыл бұрын
I am having the same issue now, on long rides, the check engine and the traction lights are on and loose power (RPM 3500 max). if I stop it and let it cool, the traction light goes, and the check engine stays for 2 to 3 days and then turns off. As soon as the traction light goes off, I drive with no issue. don't know what to do now. please let me know how it worked for you. Thanks
@KarlLSnyder
Жыл бұрын
Curious what the outcome to your issue was, Jobu. I just replaced my cam position sensor and am now getting delayed starting issues...among other issues 🤷♂️
@donlum9128
5 ай бұрын
Also replace air intake temp sensor.
@FloridaJeepRides
5 ай бұрын
One of the things I found out on all the errors was regarding the Key. One of our keys was not chipped and may have caused a few issues. I have been using the legit key lately and it's doing great.
@jong8542
2 жыл бұрын
Should get a sock to put on that hi-flow intake filter for dust / water
@FloridaJeepRides
2 жыл бұрын
I never thought about that, Good idea.
@thomasbrustad5596
3 жыл бұрын
Maybe a oil catch can? I’ll be up-grading my battery/Atl cables and installing a oil catch can.
@FloridaJeepRides
3 жыл бұрын
It's all good now, and I hope it stays that way for awhile. I need to do the clutch on the 95 next.
@childrey14
Жыл бұрын
I haven't changed my throttle body yet in my 2011 Jeep Wrangler Sport. I replaced the Thermostat and about to change my coolant temperature sensor. My issue is no loss of power and my Throttle Body is clean as can be, but the Check Engine light and Throttle light came on and the temperature gauge doesn't go above 3/4. No overheating and even flushed to change out radiator fluid. I'm thinking it's the Coolant Temperature Sensor. Any suggestions I'm all ears.
@FloridaJeepRides
Жыл бұрын
I had the same issues. When I took it off it looked clean. After replacing it it fixed the issue. I cleaned it up with Throttle body cleaner. There also is a sensor on them that can cause issues. I upgraded my code reader to get a better look at things. If I had to do it again I would take it to a shop where they could put it on a real diagnostic machine. That could have saved time and money.
@donlum9128
5 ай бұрын
Replace air intake temp sensor
@justinblumenschein973
2 жыл бұрын
Wondering if you have a detailed wire pin out for the throttle body connector. Long story short my plug was damaged. Pinned in New plug and never documented the original wire layout. Currently red lightning bolt on and little to no throttle response. Thanks!
@FloridaJeepRides
2 жыл бұрын
The Jeep is in the shop but when it gets back I can take a photo. Watch for the red Jeep and remind me. I hope its fixed soon.
@francismwila639
Жыл бұрын
My 2008 Jeep wrangler JK Unlimited has the Red Lightening Bolt. I have so far replaced Throttle Body, Accelerator Pedal and Camshaft position sensor. The red lightening bolt hasn't gone and my Jeep has no acceleration.
@FloridaJeepRides
Жыл бұрын
I have never had that but this might help www.jeepzine.com/red-lightning-bolt-on-dash-how-to-fix-on-jeep/. Try turning the key on three times fast but not to the start position. A code should show if you do it right.
@donlum9128
5 ай бұрын
Replace air intake temp sensor
@chriscrockett787
Жыл бұрын
What year was this jeep?
@FloridaJeepRides
Жыл бұрын
2007 JK 2 door with a 3.8l six speed manual. 180,000 miles
@jeffdouglas5325
Жыл бұрын
What type of starting issues are you having? We have a 2011 JKU and when you go to start it it takes a little bit for it to fire up. Is this the issue you were having?
@FloridaJeepRides
Жыл бұрын
Where to start.... about two years ago while wheeling at the location for Jeeping with Judd, I had a crankshaft position sensor go out. Then an error for the camshaft sensor, the map sensor, the temperature sending unit, and it goes on and on and on. I began to think that possibly the CPU was malfunctioning. It always turned over strong but acted like it was not getting fuel or fire. I changed almost every sensor on it and yet it would run for a while and then start having problems again. Long answer, I finally took it down to a shop where they discovered there was a problem with the fuel pump and there was not enough fuel pressure. That may have been causing things to not properly burn the fuel which was clogging up any other component that was associated with that. And as of now it is doing it again and left me stranded about 12 miles from home. Eventually it started but at this point I'm having trust issues with it.
@jonathanribbing3055
Жыл бұрын
I'm doing a bunch of repairs/ maintenance / preventative maintenance to my 2010 jku before my trip from PA to FL this jan. I also am replacing the throttle body. Did you ever get your electrical issues sorted out with this jeep?
@FloridaJeepRides
Жыл бұрын
Yes it looks like its worked its way through for now. Currently working on ABS stuff on the blue 2010.
@JeepTrailsandBarbells
Жыл бұрын
Have you had any issues with gas mileage dropping? For the last 3 months, my jeep went from 260 a tank down to 170 a tank. No codes at all whatsoever. So now I'm going to start the process of eliminating everything it could be. I'm just wondering if you have had that kind of issue. The start of this is going to be The clutch (it's going out) EGR PCV TUNE UP (done less than a year ago) O2 sensors PCM IAT sensor THROTTLEBODY The dealer wants 200 a hour for diagnostic, and I can't take a chance on them taking 3 or 4 hours trying to figure out what wrong and cost me 600 to 800. I can pretty much do all the work for that amount.
@FloridaJeepRides
Жыл бұрын
Some times I get around 12 others 14 most has to do with how heavy I’m on the gas. I get a check done. Plugs are a good start though.
@kvgchasinghaunts3108
3 жыл бұрын
I have a p0300 Random misfire I have been chasing. Fuel pressure is good 59psi, compression is good, I have spark. Only other codes I have had is the o2 code. Did this help your random misfire? I don’t have a code for the throttle body. Any help will be appreciated.
@FloridaJeepRides
3 жыл бұрын
Yes after changing egr I have not had any more issues. That was the hardest part to get to. Every time I changed a part a new code would come. The only thing left was the pc board. Lots of money.
@kvgchasinghaunts3108
3 жыл бұрын
@@FloridaJeepRides I already have changed the egr(it was a pain to change). I had a code for it about a year ago. The only code showing up now is p0300 random misfire. I have check everything, and everything seems to be ok. I was wondering if the throttle body might be it. I am lost
@tannersmith8228
2 жыл бұрын
Hey man I need some help... I have my engine misfiring on 1 and 4. I've replaced spark plugs, wires, and coil pack, a few different times since then, and the engine is still missing, everytime i change it is seems to not fix anything
@tannersmith8228
2 жыл бұрын
Could that be a crank or cam sensor?
@FloridaJeepRides
2 жыл бұрын
I have replace so many parts and the cam sensor was one. A good code reader helps narrow down whats messing up.
@tannersmith8228
2 жыл бұрын
I also forgot to mention it's throwing the p0300 code, that's the general misfire, and none of 9t has changed anything, any idea there?
@jezzedominguez4315
Жыл бұрын
Had the same issue it was pcm eBay cheaper hope it works
@ulikemeb12
3 жыл бұрын
I disconnected my throttle bottle to clean it and now I have the lightening bolt showing up anyone know what it could be? I connected everything back in place
@FloridaJeepRides
3 жыл бұрын
Here is a link to a discussion on the lightning bolt. www.wranglerforum.com/threads/lighting-bolt-light.539081/
@petehadden5606
3 жыл бұрын
Wondering if you got a dtc before the throttle body change? I got the red lighting bolt ETC light, and the jeep died while driving. Its a 2011 jk cranks...wont start, when i get it to crank, its misfiring on multiple cylinders. Feel like im chasing ghosts. Throttle body seems like next logical step. Thanks for any feedback
@FloridaJeepRides
3 жыл бұрын
Yes we did. It would give a code then after the fix a new one would come. It's been running good. Chasing ghosts is a good way to put it. I also changed the Coil pack, plugs, and wires. The last thing I would have done was the PCM. Even with throwing parts at it, its less than a monthly payment.
@petehadden5606
3 жыл бұрын
@@FloridaJeepRides thanks...ordered a throttle body...will update if that solves the issue.
@bolone3
3 жыл бұрын
@@FloridaJeepRides I got the red lighting bolt so replaced the throttle body that didn't help. Come to find out a mouse chewed one of the wires that comes off the computer. I put a connector on it and it fixed it right away
@FloridaJeepRides
3 жыл бұрын
I thought about that with mine. Jeepers Den recommended I do a full check on the wires to make sure nothing got shorted or chewed.
@armandosamaniego2096
2 жыл бұрын
@@petehadden5606 did it fix your issue ?
@michaelrodiles3522
Жыл бұрын
I put on the new throttle body and the is fail The computer say sensor A circuit higt input
@FloridaJeepRides
Жыл бұрын
We went through so many codes on this Jeep.
@donlum9128
5 ай бұрын
Replace air intake temp sensor been there done that
@silverado2500wr450
2 жыл бұрын
WHAT ENGINE CODES WERE YOU GETTING? P2138?
@FloridaJeepRides
2 жыл бұрын
I tried to go back and look, so much that happened over the last year to that Jeep. It might be time to invest in a better code reader. It just got the fuel filter and fuel pump changed and is running now.
@kinggrim374
2 жыл бұрын
What brand is the best??
@FloridaJeepRides
2 жыл бұрын
This time I went with a part from Advance Auto, if I have an issue I can bring it back. Paide just about $100
@germanstein
3 жыл бұрын
not a big fan of 3.8 burns to much oil
@FloridaJeepRides
3 жыл бұрын
Mini van... We keep the oil changes frequently.
@kvgchasinghaunts3108
3 жыл бұрын
Mine always have, since day one
@bigfan1364
2 жыл бұрын
I use gasoline in mine.
@commongunowner2173
3 жыл бұрын
Gremlins gone?
@FloridaJeepRides
3 жыл бұрын
I think so - Now just to get the guts up to put it to the test... I drive all around the neighborhood and its all good. On a good note I have been out in the YJ twice this week.
Пікірлер: 88