flashing wled and controlling it with domoticz
need:
- nodemcu or d1mini, nodemcu preffered because of internal voltage regulator
- power supply, make sure it has enough amps, 1 amp per meter is a good rule of thumb
- led's types: WS2812B, WS2811, SK6812, APA102 are supported
1. download wled github.com/Aircoookie/WLED/re...
2. flash the nodemcu using esp easy flasher (download: github.com/nodemcu/nodemcu-fl... )
3. connect gpio 2 (d4) to the data wire on the led strip
4. connect power and ground, MAKE SURE THE NODEMCU/D1 MINI AND THE LED STRIP SHARE THE SAME GROUND
5. connect to the wifi network WLED-AP wiht password wled1234 and go to the ip 4.3.2.1
6. put in your wifi credentials to connect it to your wifi network
7. search for the ip of your wled module
8. have some fun
connecting to domoticz:
1. ssh into your domoticz and go to the plugins folder by typing cd domoticz/plugins
2. install the python plugin: git clone github.com/frustreermeneer/do... wled
3. restart domoticz
4. configure the plugin in the hardware window of domoticz.
5. automate your fun!
Негізгі бет Тәжірибелік нұсқаулар және стиль Wled ws2811, ws2812b led strips holiday led with Domoticz
Пікірлер: 14