This may be the best KZitem build this year. Can’t wait to see a rear engine drift car done right
@bdjoof
Жыл бұрын
Flooded P1 rebuild is #1, imo this is #2,
@02bluehawk
Жыл бұрын
Enjoying the hell out of this build can't wait to see what it becomes
@derekkuehn
Жыл бұрын
Best build on KZitem right now.
@twinstealth
Жыл бұрын
So excited to start seeing all the modifications on this thing and can't wait to see it done! The fact that it was a flood car was the best donor for building a drift car. Just a lot of cleaning and throwing away a lot of the stuff you weren't going to use anyway!
@wagnermotors99
Жыл бұрын
KZitem never shows Matt's videos I always have to go look for them, definitely turning on all notifications
@areacode08
Жыл бұрын
This is the build I’m most excited for on all of the interwebs.
@pjohnson7974
Жыл бұрын
This is one of the coolest builds on KZitem ! 🔥🔥🔥🔥
@schassis_eddi
Жыл бұрын
Great work Matt! Can’t wait to see the final product! SEMA 2023?
@mikemikeyee
Жыл бұрын
So much box tubes on the chassis. Straight up racecar.
@jaygood87
Жыл бұрын
I like it matt... in the last video I said it was to short, and you delivered 👌🏼 please keep the videos longer 👍🏻👍🏻
@heyletsplaythis
Жыл бұрын
Bro, use “we” more. You keep saying “I” but your team is a big part. Love ya and can’t wait to see this be your 2024 FD car…. 👏🏼👏🏼👏🏼👏🏼
@ELBBQ
Жыл бұрын
I’m so stoked to see this come together!
@kspectre21
Жыл бұрын
Good to see it clean finally :D
@seanhermm
Жыл бұрын
This is one car I can’t wait to see finished drifting 😊
@Sergeantgrunt
Жыл бұрын
I'm looking forward to the first drag C8.
@dextermchaze
Жыл бұрын
This rules! Can't wait to see it rippin, but here for the journey.
@LRSNRCNG309
Жыл бұрын
Cant wait to see what i think should be appropriately named as you guys were joking "Lea King" become the first drift c8
@fernandoquiceno
Жыл бұрын
I’m excited for this c8 content
@joshehman3571
Жыл бұрын
Super neat
@shawnczapla1864
Жыл бұрын
Super excited for this build!
@Hudjunababa
Жыл бұрын
Stoked for this thing!
@driftergonewild
Жыл бұрын
Pretty wild!
@KARR
Жыл бұрын
That panel bond adhesive is tough stuff. 3m makes some strong stuff not sure if that's what brand the c8 uses. Some modern adhesives are just as strong as welds and even used in some high end racecars.
@dougavery3697
Жыл бұрын
love it!!!!!
@tptrsn
Жыл бұрын
LOVE IT!!!
@ParagonPerformance
Жыл бұрын
So much progress already with this build! We love to see it, keep it up!
@patricklaporte180sx
Жыл бұрын
Love that séries cant wait too see the 1st drift test
@leftcoastdrifter
Жыл бұрын
Loving this series
@sefferrr
Жыл бұрын
fuckkk yea! this series gets me hard as shit lfg!!
@inkanthem
Жыл бұрын
Flood damage is serious!
@jimmyxthai
Жыл бұрын
Matt’s Filipino accent is hilarious 😂. You’re not from the bay if you don’t have some Filipino homies
@jonm515
Жыл бұрын
Woooo another Monday with Matt! Can't wait to see how this turns out. What gearbox you gonna run with?
@Criscitiello
Жыл бұрын
Cant wait to see the C8 go full racecar :D All of the factory electronics/transaxle have really been holding everyone back. What transaxle are you planning for it?
@chriscapita159
Жыл бұрын
Is that a Leh Keen reference at 7:52? lol
@MrLincoln87
Жыл бұрын
Once you had it cleaned out... it was so much better looking, that it almost looks like you had potential to put it back together and flip it lol
@Shonfromiowa
Жыл бұрын
What are the long term plans with this car. What engine and are you building it for fd?
@georgef1176
Жыл бұрын
I would think Any lambo gallardo grazziano type manual transmission should fit back there with the c8 having that trunk area. It’s what I would try anyway or maybe ford GT but I know those are more expensive. Those grazzy trans axles get used for slc kit cars a lot I know they sell them still.
@hanfederal3268
Жыл бұрын
#tjhunt need to give matt wide bodykit for this c8
@Precisionmechanic
Жыл бұрын
Is it going to be the first front engine manual C8?
@csankimonkey
Жыл бұрын
im sooo curious because my c7 was in the same flooding
@shanekelly4836
Жыл бұрын
What transmission setup will be used?
@nessie42786
Жыл бұрын
As far as a trans Mendeola makes a 4 spd sequential mid engine high horsepower transaxle.
@cwood288
Жыл бұрын
Why does this car have a transmission tunnel? Front engine conversion?
@ParagonPerformance
Жыл бұрын
Stores the batteries for the electric motors on the E-Ray Model.
@SantysEK
Жыл бұрын
Next time put some baby powder on your arms before working on the fiberglass or carbon. Helps avoid the itchy feeling
@patonb
Жыл бұрын
Bristol 1000???
@michaelvond8205
Жыл бұрын
not clickbait real life ninja turtle disassembles corvette
@406RamsFan
Жыл бұрын
Sorry I'm late, it probably will happen again.
@derekcraig3617
Жыл бұрын
why not rebuild the motor and either sell it or use it in this build?
@_Gh0st777_
Жыл бұрын
Kinda useless to rebuild the motor when it’s toast since it was underwater plus Matt is most likely gonna have a Texas Speed built for it.
@derekcraig3617
Жыл бұрын
@@_Gh0st777_ Uhhhhhh, why not open the motor up? it could be salvageable. and if it is then rebuilding it and selling it would net quite a pretty penny...
@johnmcmullen456
Жыл бұрын
@@derekcraig3617 Agreed. Why scrap a 490 HP all aluminum V8? If able to dismantle the car, should have the talent to tear down, clean, and reassemble the engine with new rings, bearings, gaskets & seals.
@12voltkingpin
Жыл бұрын
You guys should have a conversation with Ms.Emelia about assembly/ disassembly, motor, performance upgrades and companies she worked with to develop for that C8 platform
@csankimonkey
Жыл бұрын
bruh hold the damn camera still lol im getting dizzy
@ayoungtricknamedjim5498
Жыл бұрын
Three long videos and nothing has happened.
@theshop547
Жыл бұрын
Like to buy engine and transmission
@Soravia
Жыл бұрын
Great work on car, horrible camera work
@enqwo
Жыл бұрын
please get a carbon streethunter widebody kit it would be so so sick
@_Bonez12
Жыл бұрын
From what I've heard, the aliexpress stuff fits better than streethunter. I'm sure there's better options.
@jebidiahcarlyon3543
Жыл бұрын
Yeah, its ruined. But it was a Corvette to begin with, so do it up! Who cares?
Пікірлер: 63