I just purchased the Wilde driver a few weeks ago. The shank on it is extremely solid with nearly no wobble. I haven't been able to pop out a bit or anywhere close for that matter. I also have the Tekton driver with Torx bits. I like it as well, yet the shank isn't quite as tight as the Wilde.
@SUVRVing
Жыл бұрын
I bought one of the Wilde screwdrivers about a month ago after watching your videos. Just an awesome tool. Super happy with it 👍
@realworldtoolreviews
Жыл бұрын
That’s awesome. I’m so glad that so many ppl have bought that screwdriver and enjoyed it as much as I have. It really is a good one. Probably comes in handy when on the road. I imagine that multi tools are a necessity for you.
@cucolopez1942
Жыл бұрын
I've had a Lennox 6 in 1 for probably over a decade still holding up
@Spoons7414
6 ай бұрын
I keep one in the can of my truck, one in all three of the boxes in my bed, and one in each room of my house.
@jaydoherty8402
Жыл бұрын
Just so you know, I think Tekton does offer replacement bits that are just like the Wilde. Part number DZW01007 (phillips) and DZW02004 (flat). You may already be used to it as it is, but if you wanted to change it to match the Wilde you can.
@realworldtoolreviews
Жыл бұрын
I might have to pick those up! I had no idea they had those.
@bill4123
Жыл бұрын
My biggest gripe with my 6-in-1 is the slot for the wings oxidizes and jams the wings, making it annoying to switch from big to small. All of your small gripes in this video are ON POINT! Every item on that list of grievences is super annoying!
@realworldtoolreviews
Жыл бұрын
Lol I’m good at finding annoying details about tools 😂
@reconbbs360
Жыл бұрын
Just recently bought the Wilde 6 in 1 the other week off of Ebay because you said good things about it in a prior video. You were right! I really like it!
@realworldtoolreviews
Жыл бұрын
Nice! I’m glad you like it. They are great simple tools.
@rogerice3826
Жыл бұрын
Haven't carried a 6 in 1 for years, I'm much more an 11 in 1 guy. I've been using Kleins for years. I really appreciate their extended selection of bits. I have a #3 Phillips bit that is hard to find in a lot of multi bit screwdrivers and i often find myself using the 3\8 nut driver. Pratt Read made a couple of nice 6 in 1 one with a rubber overmold similar to Klein but wit more of a tapered handle and also an acetate handled one which i used to carry. I've got the Snap-On one as well which i won't recommend unless you like jiggly bits. I'm going to have to look into that Wilde one, might be the one to make me reconsider carrying a 6 in 1. Thanks for sharing. 👍
@realworldtoolreviews
Жыл бұрын
I just love the simplicity of the 6 in 1. It’s great to have an 11 in 1 sometimes and I do miss the 3/8 nut driver and the Torx and squares, but the big double sided Philips and flats are just more enjoyable to me. That Wilde in particular just feels so solid. For a multi bit, it really has very little jiggle.
@scrambler350
Жыл бұрын
4:18 -- that's a reason I don't use the KLEIN multi-drivers as much - I don't like the design that uses the shorter, double-bits - the driver needs to have a little more length and strength, IMO
@rogerice3826
Жыл бұрын
Klein has the extended reach 6 in 1 (#32559) I carry one for turning screws in deeper holes, and Klein has a good warranty too.
@realworldtoolreviews
Жыл бұрын
Yea I prefer the longer double bits for sure.
@iowafox2206
Жыл бұрын
If you can find them check out the Channellock 6in1 its the blue and clear hard handle, USA made 100% $10. I only have one currently went back to try and buy a 2nd 2 years later and the store stopped selling them but they are made still I believe 61A is the part # I believe. I think they might have redesigned this tho to the all light blue handle not sure tho.
@adamshields6618
Жыл бұрын
Lutz 6 in 1 is pretty much just like the Wilde and just as good I think for a little less money
@jackof1
Жыл бұрын
I have an old Ace hardware 6-1 that is identical, if not made by Wilde and that what I thought of as the video loaded up. Simple & functional, what more could you ask for
@realworldtoolreviews
Жыл бұрын
That’s what I love about a good 6 in 1. Just simple and easy to use.
@ptstouring49
Жыл бұрын
Ordered one of the Wilde. Coming tomorrow. My heretofore favorite has been the channellock acetate one. I will report back. One thing I wish there was is one with a PH2/3 and a 1/4/5/16 slotted. I am thinking about a make my own with two tecton. At my one old house I use a 12 in 1 southwire the most because it has the 5/16th slotted which is everywhere from the valves on the toilets to trim screws. Only issue is that it is large so not easy to carry. For vehicle stuff I still like the PB Swiss 6465 and I always have a PB Swiss 6464 in my pocket.
@realworldtoolreviews
Жыл бұрын
Nice! I hope you like it. It’s just a good simple tool. I love the pb Swiss 6464 too for sure. I’ve been throwing it in my pocket more and more since I bought it.
@benjaminhahn
9 ай бұрын
Nice review. I like the 6 in 1 that Klein makes. Very affordable and well made. Great gift. I just got one made by SK. It’s very slick.
@natashaball316
Жыл бұрын
Thank you for the recommendation! I got a klein 1 in 11 that failed me on day two after purchase. Thankful for your videos too!
@realworldtoolreviews
Жыл бұрын
Thanks for watching Natasha!
@bill4123
Жыл бұрын
I just saw a Craftsman branded Piquic style at Lowe's and it reminded me of one of your older videos.
@realworldtoolreviews
Жыл бұрын
We’ve come a long way! I like that style. A few companies have copied it. I think Milwaukee had them too.
@adamperry154
Жыл бұрын
If you dig stiff multi-screwdrivers, check out the Wiha 11-in-1. Super solid for something with so many options. It has a very similar locking mechanism to that Wilde. Has a nice, beefy handle. And it’s 11-in-1 so it even has the 3/8” which is dope.
@realworldtoolreviews
Жыл бұрын
Yea I know a lot of ppl like that one. I like Wiha stuff too. Might have to pick it up at Lowes next time I’m in there.
@TheBarteringBard
Жыл бұрын
"Jiggle factor" plays into a lot of things one can enjoy in life. 😂 I'm pretty partial to the Klein multi-bit screwdrivers. Pretty sure I learned about those from your vids actually. I'd only had cheapy hand me down ones prior.
@realworldtoolreviews
Жыл бұрын
😂 you always have to consider the jiggle factor. Klein makes so many great ones. It’s tough to go wrong with them.
@rafaeltorre1643
Жыл бұрын
I found one in my car from one of my dads toolboxes and I love how well built it is.
@eyesonmyrepost3560
Жыл бұрын
Bro - I need that pounch... 💪🏾
@scrambler350
Жыл бұрын
For whatever reason, after trying a BUNCH, my Go-To is the Hilmor HVAC 9-in-1.
@scrambler350
Жыл бұрын
Probably the 'rounded square' handle style with over-molded grip. I really wish WERA would make one or their handles to accept a common multi-bit setup.
@realworldtoolreviews
Жыл бұрын
Same! Why does Wera not make a 6 in 1. I would buy that all day.
@scrambler350
Жыл бұрын
@@realworldtoolreviews I guess it's a European thing - kinda how they like different kinds of crimpers and strippers. The Euro brands always seem to favor the 'multi' screwdrivers that have a bunch of bits in the handle rather than the flip around style common here in the States - i'd argue the latter is superior (in FUNCTION, at least) because you can switch bits with ONE hand while holding onto whatever you're working on with the other.
@realworldtoolreviews
Жыл бұрын
@@scrambler350 yea and not to mention you have nut drivers in that kind too. All those bits are great and all but I’d rather have a couple nut drivers too. That’s way more useful to me.
@tannerwest6823
Жыл бұрын
Greenlee has a nice 6 in 1 as well!
@Eddy63
Жыл бұрын
Geez I like both of em Tekton or Wilde ... Good vid by the way ... Keep em coming ...
@realworldtoolreviews
Жыл бұрын
Thanks bud! You can’t go wrong with either one.
@Donniedangerously
Жыл бұрын
The price for the Wilde can’t be beat, especially for a “Made in USA” product.
@realworldtoolreviews
Жыл бұрын
Agreed. Wilde has a lot of very reasonably priced quality tools made in USA. I’m a huge fan of them as a company.
@TylerSnyder305
Жыл бұрын
I don't know who actually manufactures theirs, but the Channellock 61n are the highest quality 6-1. They're 100% made in USA, you'll even see USA on the bits which have the best hollow ground profile. I'm waiting for the current one with the new Mayhew handle to be more available, they will be about $20 when they are. That WILDE definitely looks well done, and being one of my favorite companies I may have to try one.
@realworldtoolreviews
Жыл бұрын
I have a buddy that has that channel lock one and I used to use his all the time. The only reason I ever bought one was because I didn’t want to mix ours up. It is a great one for sure.
@calebelrod5801
Жыл бұрын
I use the Ideal twist-A-nut I've been using it for about 8 months would recommend if you do a lot of Garbage disposals or just use a lot of wire nuts
@realworldtoolreviews
Жыл бұрын
I have seen that one but never used one. It’s a cool idea.
@christophermccartney7150
Жыл бұрын
middle of the week vid, sweet!
@realworldtoolreviews
Жыл бұрын
Trying to make that a regular thing!
@morgizmo87
Жыл бұрын
Had to pick up one of these screwdrivers, just came today. Seems pretty damn good. Wife opened it and asked me why we need another screwdriver, so i divorced her.
@realworldtoolreviews
Жыл бұрын
😂😂 hey I would give her another chance. If she gives you a hard time about the next screwdriver then it’s time to go. I hope you enjoy it as much as I have!
@dzufty433
Жыл бұрын
nice video, don't like this kind of screwdriver but i think wildy is the right one - with ph2/ph1 on the one side
@realworldtoolreviews
Жыл бұрын
Yea it is a superior design in my opinion.
@busman2050
4 ай бұрын
I bought a Snap On 6 in 1 not too long ago with the classic hard plastic handle from their website. It was terrible. Loose fitting, rattles, really poor quality. Worst screwdriver i ever bought. The Wilde looks superior to that Snap On junk
@AMERICANPRIDE1100
Жыл бұрын
No comparison with the #2 Phillips on the 1/4 in side is gold
Пікірлер: 57