Looks like it’ll have slack to wiggle around where those pins hold it together.. how much do u think those strut towers are moving to take up that amount of slack before it stabilizes anything?
@mitchevett
Жыл бұрын
Just bought this brace for my 2019 Daytona 392. Thanks you so much for the video. I now feel confident about the install. In my honest opinion, the Drake is the best looking one out there. Not to mention the ability to remove it without tools for engine access. I'm toying with the idea of adding a plate on the top middle with something along the lines of maybe SRT, 392, or Daytona etched on it.
@wolf-bv6lg
2 жыл бұрын
Definitely one of the best looking bars, however, it sure seems to move around a lot…kinda defeats the purpose.
@Jeff-ej4wp
2 жыл бұрын
Of all the strut tower braces I've looked at this one looks the best. I went with BMR to avoid drilling holes. I'm thinking of switching to the Drake because the BMR looks pretty raw and the strut connections are uncovered with lots of bolts showing. I wonder if the Drake would be effective without fastening to the firewall and just a strut to strut connection. Any thoughts on this?
@gbbbgbbb
2 жыл бұрын
Great question. I feel that without it being attached that it would either rattle and rub against the firewall or not be as stable. It is really no big deal to attach it, as it is only a very thin piece of metal. Even when you take it off, you really can't tell too much because there are already 2 holes there from the factory.
@briantootalltallywho5050
3 жыл бұрын
Perfect video followed along with ease.
@A-37Bdragonfly
3 жыл бұрын
Another GAY and lame just like a bottom feeder challenger owner.. trying so hard to get some street cred
@dustinsmith7919
3 жыл бұрын
Going off of this video I was able to complete my install of the blend mount for my radar detector in my charger. I have never done anything like that before. Never used a multimeter before. I just wanted to say thank you for the video. I found it extremely helpful. I had it done in about 15 min.
@gbbbgbbb
3 жыл бұрын
Awesome...glad you find this helpful and thanks for feedback. Best of luck in the future with your adding mods.
@themarathoncontinues2289
3 жыл бұрын
Did you feel any difference?
@عليكاظمعلي-ع6د
3 жыл бұрын
شنو السالفه
@larrywhitingjr.2096
3 жыл бұрын
Whats the name of the screwdriver, and where did you get it?
@rts159
4 жыл бұрын
where did you get the extra wires that connect to each ends ?
@focusedmotivation1111
4 жыл бұрын
Hey where did you find those yellow stickers for your accent colors ?
@leosanders3784
4 жыл бұрын
Vent lights they stay on with the parking lights to?so they were fully functional cause they work with the brake lights ,turn signal ,PARKING lights?plus honeycomb?
@leosanders3784
4 жыл бұрын
Like the vent lights & they also work with turn signal to , so where did you get them from? Did you say they were honeycomb ? For my self I really like the vent lights!
@andrewdegroot9008
4 жыл бұрын
Are replacement parts available for this brace I need a new plate and shims that’s bolt into the firewall bar
@HerminioOjeda
4 жыл бұрын
Will this fit the 2015 challenger R/T with engine cover?
@A1Saucin
2 жыл бұрын
Yes
@HerminioOjeda
4 жыл бұрын
Would that fit with the egine cover?
@chriswilliamson806
Жыл бұрын
Looks like a 6.4.. so, no engine cover.
@4thofjuly190
4 жыл бұрын
Curious of what and how you did the vent lights. I think they look great man
@alexanderchavez2164
4 жыл бұрын
Will this fit the 2019 challenger wide body scat pack?
@nchargeny
3 жыл бұрын
i'm wondering the same thing
@thereflectionartist
4 жыл бұрын
Mine just came today......Headed to the store to get drill bits
@momo300s2
4 жыл бұрын
The best instruction by far
@alanb23
4 жыл бұрын
How big are bolts I bought this and didn’t get Allen bolts unfortunately
@drakeautogroup
4 жыл бұрын
awesome vid! How are you liking it so far?
@jxamob1640
4 жыл бұрын
Your vent lights being functional to the signal and all is super underrated! Sick mod 🔥
@gbbbgbbb
4 жыл бұрын
thanks Sir.. It is one mod that I have never seen in my area. It really stands out at night and gets lots of compliments on them. The best thing is that it was one of the cheapest mods that I did.
@backwoodsbandit3138
8 ай бұрын
@@gbbbgbbbidk if you still make video content but we need you back! Could you please make a video of how to install these lights on your next video😩🙏🏽
@BlackViper58
4 жыл бұрын
Greg, Can you add a link where you picked this up from. Thank you .
@MR500BULLIT
4 жыл бұрын
Jesus Perez I’ve seen it at FastHemis.com. I am thinking about getting it for my srt8 300.
@drakeautogroup
4 жыл бұрын
checkout our find a dealer locator on the site
@thereflectionartist
4 жыл бұрын
@@drakeautogroup Is the part number the same for both the Charger and Challenger???
@nchargeny
3 жыл бұрын
@@drakeautogroup would this fit a 2019 challenger rt scatpack widebody?
@drakeautogroup
3 жыл бұрын
@@nchargeny yes
@BlackViper58
4 жыл бұрын
Greg, where did you order the Drake Strut Tower Brace. Thank you
@gbbbgbbb
4 жыл бұрын
Thanks for the question. I ordered it from Summit Racing. www.summitracing.com/parts/dmg-mo-280001-bl/
@mford739
4 жыл бұрын
Any problem with the PVC touching the brace ? Especially when the engine torques up ? I really like to get one, but man it sure looks close. Please replay.
@widebody_moparmike
4 жыл бұрын
mford739 that’s not the EGR , that’s the PCV valve , only hemis that had a egr were the 03-08 5.7s which is mounted on the passenger side cylinder head at the front
@mford739
4 жыл бұрын
@@widebody_moparmike Yeah, I forgot to edit It before i posted. Thanks
@gbbbgbbb
4 жыл бұрын
@@mford739 Thanks for the clarification MoparMike... No issues at all. I think it is more of an optical illusion as it is not close enough to cause any issues at all.
@RogerJG21
5 жыл бұрын
Did you get the Dark Stealth or glossy Black?
@gbbbgbbb
5 жыл бұрын
Dark Stealth they look great since I was looking for a flat look.
@fifty81ify
5 жыл бұрын
Where did you get it
@steveandersen5514
5 жыл бұрын
I have a 2019 SXT Blacktop and the rear view mirror housing is half as wide But it all worked just as this vid showed. I needed to use a screwdriver to get the small wiring connector out because the whole unit it plugs into was sliding out along with it. A small turn of a screwdriver and it came right out. Wire colors and orientation were exactly as video shows. Thanks much!!!!
@gbbbgbbb
5 жыл бұрын
Glad this was helpful.... Stay safe
@joedurso5192
5 жыл бұрын
great video Sir...how / where did you get the custom colored coil covers...sharp
@John-lm1zg
5 жыл бұрын
Great Video, Do you think it is as strong or sturdy as the mopar strut brace tower? I'm debating which one to get. Thank you
@gbbbgbbb
5 жыл бұрын
In my opinion, it's as sturdy as any strut tower brace that I have seen. I have several friends that have different styles and brands, and frankly, it is really about look and preference. They all pretty much do the same thing and serve the same purpose, so it comes down to looks and how it fits with the overall theme that you are going for. The big positive for this brace to me, however, I never hope to need it, is how easy it is to remove. Four (4) push pins and it's out. Nothing to unbolt or screw. this would be great if there was work that you needed to do on the engine. Also with the flat portion of the brace, you could easily place any dress up that you wanted. Overall, to me, it looks great and gives you more options to play with once installed. Thanks for the comments.
@NewKind
5 жыл бұрын
That right angle screwdriver would’ve saved so much time 🤦🏽♂️
@gbbbgbbb
5 жыл бұрын
Yep. They are so inexpensive and makes the process so much easier and less frustrating. For those with large hands, it is a must.
@slim_3923
5 жыл бұрын
Hey man did your assist or other button light up? Because I did the same and mine don’t light up or work anymore
@gbbbgbbb
5 жыл бұрын
If you're talking about the LaneSense Lane Departure Warning System, yes it worked perfectly after the install. If that is what you are referring to I would do the following. I am assuming that you might not have done these steps. First ensure that the fuse is not blown during the install. It is slot 45 - 15 Amp Blue Cluster / Rearview Mirror / Compass (Charger/300) / Humidity Sensor / Forward Facing Camera (Lane Departure) / Cyber Gateway. Also, Remember that when enabled the system operates above 37 mph and below 112 mph. Since it is easy to install the mirror tap, I would also try pulling one of the taps out and see if that fixes it, just in case there is some cross wiring that causes a short. Give these a try first.
Пікірлер