I have a 2008 with the same issue. I will try this and really hope it's work. Thanks for the tips
@carlynjean1654
3 ай бұрын
What if neither low beam is working?
@StephenClarkDobson
Ай бұрын
That’s my problem.
@ChrisCivitarese
4 ай бұрын
So can I just splice a small wire under the box instead of running across the truck?
@cups-ct1yl
5 ай бұрын
Hey I really appreciate it... It' worked... God bless you😎
@schlick93ify
6 ай бұрын
I’m glad I found your video I have the same exact truck with the same exact issue but mine is the passenger side low beam isn’t working, the high beam works fine tho, I guess I’m going to have to splice it because I’m not spending 800$ to fix it screw that!
@brentcook3910
6 ай бұрын
It worked great. 3/20/24. Thank you
@RobertLaw-nx2qv
7 ай бұрын
What if both left and right drivers are out ?
@GaetanFugere
7 ай бұрын
I understand your vidéo but me on 06 5.7lt Ram 1500 only the high beam work both Side and the low and day light don't work ...so your lucky one side low beam work for toi but mine don't work both side...did you have a solution thank's
@Ponyreiter
8 ай бұрын
So, with your fix, when the next driver dies, you drive totally blind in the night... 😐
@yatox8
8 ай бұрын
SAME issue on my 01' Dakota. Chasing the low beam p/w wire everywhere looking for a short. Ultimately hoping wasn't the driver module, but most likely is.. I was thinking of doing the same splice.. but just wanted to poke around online to see if anyone done it first. Also going to toss in LED bulbs which draw less watts then halogen.. so that might even help the one CTM driver out since it would be powering both lights. Anyway thanks!
@wheyez1
8 ай бұрын
I think I will install a relay for both high and low attaching the fog light supply to the low beam. Thank you for the video, my motor manual was no help for location.
@wheyez1
8 ай бұрын
I did the relay trick, it worked
@JosephPerch
8 ай бұрын
What if the low beam doesn't work on the right side but the high beams work. The right side was working before then doesn't work any longer. How would I be able to fix the problem
@nealecole8768
9 ай бұрын
Did you have any voltage to the bad headlight?
@randycorbin8266
9 ай бұрын
Thank you!!!
@gnowing2747
10 ай бұрын
This video is 7 years old but still hits. Just jumped my drive wires per this video to fix my headlights.
@rogerketner153
10 ай бұрын
Hello, where can people get the diagrams from? I have a 2007 dodge ram 1500 5.7 doing that same stuff. Appreciate ya!
@jimedwards2511
10 ай бұрын
excellent video, solved my problem. I appreciate you posting this.
@James-px8ji
Жыл бұрын
Don't do this it will burn out again in about a week
@mikemcreynolds6236
Жыл бұрын
I have no fog lights, thought it was the bulbs miraculously going out at the same time Bought new and no fog lights. I was thinking it was the ground, I have power to both sockets.
@TheDeuceMan
Жыл бұрын
I'm currently having the same issue. How long did this fix work?
@madelinev174
Жыл бұрын
I have the same problem with my 05 dodge durango right now
@roberts208
Жыл бұрын
I'm having the same issue in my 4500 but I have read that jumping them only lasts so long, I'm at the point where I might just cut them both and run them to a toggle switch and be done with it that way they TIPM isn't killing both headlights when the signal is engaged
@mikesmith-th5rf
Жыл бұрын
I got a 06 ram 2500 and I have no low beams got high and I have no day time running lights on my passenger side
@lesbenson54
Жыл бұрын
Best video of the several addressing this issue. Thanks for the tip. Popping the hood on my 2006 3500 and getting it done
@AATreeService
Жыл бұрын
Anyone know if U can just plug the bad side wire and run that into the good side since that driver is bad anyway. U feel like “jumping” then will cause that bad driver to voltage spike since it is still on the ecm
@sleepeeeparents
Жыл бұрын
Could have just took the positive and negative wire off battery held them together with zip ties for about fitee. Minutes to complete reset the tipm relays. If it still doesn't work after than then do this. But this is guaranteed tipm replacement later down the road as the passenger driver WILL go bad with the extra load. Usually within six months.
@scottqueen1012
Жыл бұрын
What if you don't have any low beam?
@bigkahuna225
Жыл бұрын
Was changing a led today on my 04, no low beam still no low beam after change... seen your fix, I ran the wire around the rad it was easier for me, 15 minutes later everything was working correctly thank you😁
@benshrope5707
2 жыл бұрын
same issue thank you! Got it narrowed down to the TPIM last night then found this. very helpful thanks man!
@HardCoreMexican318
2 жыл бұрын
Only lasted 3 months and both are dead now and high beams too 🤦🏻♂️
@garyrichardson8270
2 жыл бұрын
Literally just fixed this problem thanks to your video. 2 in piece of wire saved me $800
@carloschavarri1156
2 жыл бұрын
Thanks for your video I have 2015 ram never a problem until two weeks ago Trying to install stupid LED Don’t work Putting everything back with original bulb no power on the right headlight Going crazy with this finally find out about the stupid fuse box from Chrysler
@1.slowram148
2 жыл бұрын
so all he did was get power from the driver side?
@beckymayhall5380
2 жыл бұрын
Why does my lights on the low side blink when I first turn them on but won't stay on only hi side will keep them on
@aleskiy
2 жыл бұрын
Thanks Brother!!!!!
@DeputyDeppe
2 жыл бұрын
My dad’s ‘04 driver went out periodically then finally just quit, then a week later the passenger followed. Guess I’m going with the new TIPM
@shawncooke1
2 жыл бұрын
My truck already had the jumper going from the driver side light over to the passenger side light when I bought it. I added LEDs to it and lost low beam. How can I fix that? I have checked all connections on the Tipm, look for any broken wires, check the voltage in the plugs. All wires are showing 12 volt to 14 volt when running. I also don't have brake lights, only the third brake light works. 😭
@OIPAEZ
2 жыл бұрын
Dam I have the same problem I’m going to do that…
@fettieteam2333
2 жыл бұрын
Good rig bro but behind the air box where those wires run to the ecu is a common spot for wires to short, corrosion, come apart, also by your left foot when driving there’s a harness down there that’s also a common area for shorts, wire spits, and corrosion. From my back yard experience with these systems , buying and flipping rams they don’t like shit tap into them. Any aftermarket alarms, kill switches, radios etc can effect the can communication. Check anywhere you’ve added accessories, heat and metal can also effect it. Check where the harnesses are routed for rub and wear and burn marks. Any short, out bulb in the cabin can cause other things to act up as there all tied to the same circuit is how I basically look at a dodge. BMW is another one who does the same thing. I’m no mechanic but I’ve work on a good bit of these as I do my own work as much as my tools allow
@canliem
8 ай бұрын
You are absolutely right. You know more than a pro mechanic Sir. With all due respect to your post.
@matthunter3847
2 жыл бұрын
Wicked totally worked
@grantreese4338
2 жыл бұрын
OK so I’ve had this problem with my truck I only had one low beam on the driver side high beams work I jumped it from one socket to the other worked for two days and then all my lights went out except for my fog lights I just took my whole PCM off took it apart cleaned it put it back in and now I have high beams with no power going to my low beam socket. It’s a 04 ram 1500 any ideas would be greatly appreciated
@joshualbarham
2 жыл бұрын
I had to do this in 2017, but my problem was a little bit worse. I had to swap my lows to my highs, so it says I'm always running high beams.
@weldonboyles5848
2 жыл бұрын
What is the high beam wire and colors only one side works for high beam and the other side works for low beam on my 07 ram 1500
@marcoreyes700
2 жыл бұрын
will this work with my problem I have the same truck a 06 ram my driver side head light only come on when its on high beam when its on normal/low beam it does not work but the other head light on my driver side does work on low and high beam I'm so confuse i know its weird right??? any help guys and gals will go along way thank you in advance!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
@kwb377
2 жыл бұрын
Thanks for the video...wondering if this is my issue. 2006 model w/ passenger side low beam inoperative. Checked power at the bulb connector on the good side...with low beams on, I get 11.98v on low beam wire and 10.4v on high beam. When I switch the high beams on, it reverses and there's 10.4v at the low beam wire and 11.98v at the high beam. When I check the passenger side, I'm getting 10.4v on the low beam regardless if the headlights are in the low or high beam position...so it's still getting power, just not enough to power the bulb. Will the jumper trick still work on mine, or is it possibly another issue?
@drewm966
2 жыл бұрын
With all these problems why don’t they do a recall
@wesbishop5518
3 жыл бұрын
If you do this fix, its best to run the wire through a relay. By just jumping wire to wire, I got about a year out of the fix before both low beams stopped working, and forced into buying a new tipm. Lights were good after new tipm for about a year and issue has returned. Ran the wire through a relay, and have worked for two years and going....
@jpablo041997
3 жыл бұрын
Hi Wes, I have the same issue. with the both low headlight, how is your fix about put a relay to the highlight cable? wich kind of relay is it? I really apreciate it your answer!
@wesbishop5518
3 жыл бұрын
@@jpablo041997 when both of the low beams go out, I replaced my tipm. If one headlight works, then with a 5 terminal relay. 1-to positive power with inline fuse. 2- ground. 3- headlight wire that was working and has power going into relay. 4-wire off relay to right lowbeam. 5- wire of relay to left lowbeam headlight. Does that make sense?
@jpablo041997
3 жыл бұрын
Yeah, thanks for your answer!
@patrickmolloy9828
9 ай бұрын
Just following this. I have a 2006 ram 2500 diesel 5.9 , passenger low beam out , I would like to do what Roman posted, direct socket to socket Leeds but concerned about over power and damaging tpi m etc ? Thanks
@patrickmc.2011
3 жыл бұрын
Why not just change it to a fuse with nothing on it and put the headlights and switch in a fuze?
@isaguq
3 жыл бұрын
Thank for the video, it helped me fix my issues for my low beam headlights, but it was the passenger side that was out!
Пікірлер