Brother how the bike has been? I try to put a slip exhaust on mine and for some reason it was overheating and just drinking the gas and oil i ended up putting the stock back😢
@OceansSunsets
3 күн бұрын
Any links to buy.
@riduanjasiqi4694
3 күн бұрын
Did the aftermarket exhaust increase performance?
@andrecaeiros4266
4 күн бұрын
Hey!I forgot , how much did it cost? Thank you
@az_studio
6 күн бұрын
Sedap betholl bunyi dia
@Khale_EL
7 күн бұрын
How much did the exhaust cost ?
@carguy792
8 күн бұрын
wicked stuff , i ended up de baffling stock box rather than swap out and it sounds similar. But thats perfect volume and note is that!
@Jones-xx2gc
9 күн бұрын
Hi, great video. will that system require an engine re-map.
@Bama_390
8 күн бұрын
To get full power and run perfect yes.
@dimagamlin7008
9 күн бұрын
Rip block and piston
@KTM_D390
10 күн бұрын
Need any tuning 😶
@andrecaeiros4266
10 күн бұрын
Great video!! It helped a lot! The Bafle can be easily removed or needs help from a mechanic? Thank you
@Bama_390
8 күн бұрын
It’s easily removed with a grinder. It has 3 small tack welds to remove
@andrecaeiros4266
8 күн бұрын
@@Bama_390i still have a doubt, there’s a dekat from them, I have the Remus from Ktm catalog , dunno if I should buy the mid pipe (catalyst suppressor) from ixil , they say the catalyst is in the original mid pipe.. is it true? Thank you
@MrJhobert
6 күн бұрын
@andrecaeiros4266 Did you get the under belly Remus? If so, how's the sound compared to the one on the video?
@andrecaeiros4266
5 күн бұрын
@@MrJhobert for me it was a waste of money. Cause it’s like an exaust with catalyst even if you take the db killer out it’s a bad product for me. That’s why I wanna buy this one , cause it doesn’t have that “box” like mine has under and this ixil has a conection between exaust and the other pipe.
@smaze1782
10 күн бұрын
Just ordered this exhaust for my ‘24. They look really well made. Good value too.
@DamienGaudet
10 күн бұрын
Pretty sure every 390 owner is going to be buying this exhaust now. Myself included. Excellent vid.
@iamproud2646
12 күн бұрын
Wow sound amazing how much noise level it's is above 80+
@Bama_390
11 күн бұрын
It’s screaming but it’s not to the point you can’t hear you comms
@sunder5686
15 күн бұрын
bro i think you sold me on the no baffle it sounds amazing!
@drfaranggaming9299
18 күн бұрын
Do you have any problem with the bike after you change the exhaust ? I just got mine changed to SC Project and post a picture on my local group and they all said that it will damage the bike unless i use the powerpart from KTM which is remus exhaust that made specifically for this model. Mind sharing your experience ?
@Bama_390
18 күн бұрын
It will not damage the bike, it will run slightly lean on the top end. I ran my bike on the dyno and it showed a drop in the power curve up top but still put down 40hp to the ground. Granted this is without a tune completely stock map. It is better to have a tune but as of right now I do not know of any company that has support for our 2024 models.
@drfaranggaming9299
17 күн бұрын
@@Bama_390 i see. Can i know what are the outlet and inlet size for your ixil mufflet ?
@mustang8812822
19 күн бұрын
It's probably me ,but the no baffle sounds the best.
@Bama_390
19 күн бұрын
I agree, I run it without baffles
@bigfrank21
13 күн бұрын
I'm getting mine today was it hard to remove the baffles?
1 autre nouvelle abonné 🤗, j'ai acheté la même.🤭🤗😉. Grand merci à vous!!! 💯%👍👏
@Bama_390
19 күн бұрын
Thank you for subscribing, any issues on the install hit me up, I’m more than welcome to help
@NAVEENDUGGA
20 күн бұрын
Hello sir how can I contact you give your Instagram id sir
@Steve200300
20 күн бұрын
Surely this voids warranty for the first 2 years
@Bama_390
20 күн бұрын
Talked to the dealer and they told me it does not void warranty.
@danielwong984
20 күн бұрын
Thanks for sharing! When you “gutted” the secondary cat, I’m assuming that’s not a bolt on bolt off thing?? Are you running to any issues without a tune and no cats?
@Bama_390
20 күн бұрын
The secondary cat is at the end of the header pipe and you have to bust it out with a hammer and chisel. It is running a little lean up top but still put down 40hp to the wheel on the dyno
@rushabnoah3620
19 күн бұрын
@@Bama_390 The bike sounds incredible. Since you mentioned that the bike is running a bit lean, I suggest you install a "Fuel X Pro +" from RaceDynamics. It will map it accordingly to make the fuel output run more optimum.
@sunder5686
21 күн бұрын
Really just want to know if that seat/ seating in comfortable? hearing alot of mixed reviews
@Bama_390
21 күн бұрын
It’s pretty stiff, but good enough for a couple hour ride. I will be looking into an aftermarket seat soon. But most stock seats suck
@sunder5686
21 күн бұрын
@@Bama_390 damn that sucks cause i love that orange seat so much. for me its between the 390 or the 401 and honestly its a really tough decision
@VasilisZifkas
22 күн бұрын
is it street legal does it have a silencer? I want to buy this exhaust too sounds sick!
@Bama_390
22 күн бұрын
It comes with one preinstalled and one extra. I’m running without any baffles and secondary cat gutted. I know here in the USA pretty anything you do is for racing only but cops do not care how loud your bike is.
@iannguyen6255
2 күн бұрын
@@Bama_390how'd you go about getting the second cat out?
@michaelrieser9928
24 күн бұрын
Right on Bama390! I think I’m gonna get this one. There is nothing out there for a good 2024 390 slip on. This one sounds great and has a good price. Thanks for doing the work to get out these videos.
@Bama_390
23 күн бұрын
No problem, I’m hoping a company comes out with a nice side exit other than the akrapovic. Any other products or videos you would like to see, please let me know and I’ll do my best.
@koelti13
21 күн бұрын
@@Bama_390 Would it be possible to do a on board ride?
@giovafncreative
14 күн бұрын
Austing racing is doing it too
@andrecaeiros4266
5 күн бұрын
@@michaelrieser9928 there’s Austin racing but it is too expensive.
He took of the original large underbelly exhaust from the 2024 and got the small extension pipe to make the ixil slip on fit. The small extension pipe he got from ixil as well. Both parts are specifically for the 2024 390 duke.
@smaze1782
10 күн бұрын
Yup. Everything’s included with the purchase.
@antoniomonsalve4944
28 күн бұрын
Buenas tardes. Quisiera comprar ese mofle. Donde lo puedo consrguir ? Gracias .
Any mileage drop, and is it just plug and play or any modification for exhaust?
@Bama_390
26 күн бұрын
Pretty much plug and play, does need a tune after due to running lean on the top end. But as of right now I don’t know anyone that offers a programmer like power commander for it.
@Broski7k
26 күн бұрын
@@Bama_390 have you tuned?
@Bama_390
26 күн бұрын
@Broski7k I don’t, waiting on a tune to come out. As soon as one does I’ll get it and review/dyno it so y’all know if it’s a good investment or not
@Broski7k
29 күн бұрын
Any mileage drop?
@Bama_390
26 күн бұрын
No about the same
@coalixer9814
Ай бұрын
Do we have to remap the ecu for this upgrade?
@Bama_390
26 күн бұрын
To get the best gains yes. I dynoed and it put out 40hp and showed lean up top. So with a proper time should see 45ish to the wheel
@coalixer9814
26 күн бұрын
@@Bama_390I don't really want to spend more money for an ecu ramap and just want a little bit more sound. I just want to know if i put an exhaust like this will it harm the engine
@mathl672
Ай бұрын
Thank you so much sir! I will order one as soon as I have the money !
@yohannecitte6522
Ай бұрын
With db killer ?
@Bama_390
26 күн бұрын
I’ve been working long hours but my son and I are working on a video to show the difference in all the baffles from idle, rev, and acceleration.
@koelti13
Ай бұрын
where did you order it? There is no button on the website :(
Btw i recomend you to put the handlebar side mirrors, i dont see a shit on them but it looks crazy. I have another question for you, mines consume a little bit of oil, it has less than 6000km wich is less than 4000miles on it, and i had to refill like 700ml of oil. The mechanic said that its because i keep it on high rpm on the highway. I have to say that it doesnt leak from anywhere and i keep it really high on rpms like 8/9k
@Bama_390
26 күн бұрын
I could see oil consumption if you are steadily running that rpm for long periods. Two things I would suggest is a catch can to see if oil consumption is coming from the crank breather and reduce the rear sprocket size to lower cruising rpm’s. I’m going to drop down to a 43 tooth soon as well.
@michaelrieser9928
23 күн бұрын
@@Bama_390 very interested in hearing about the differences when you change the rear sprocket size. I’ve been doing tests on which gears I run it in on back road twisties. 3rd or 4th or in other words whether I’m riding in revs of 5-8000 rpm’s or 6-9000 rpm’s. I’m finding the gear windows are short in 1st-3rd. To get the speed I want in 3rd I have to really rev high, say 9000 and even then I’m at its limit. 4th is smoother or has a taller rev window, I don’t know. But even with the revs being lower I fell I’m getting torque similar to what you get at 8000-9000 rpm. When I can be in a gear and get the pull I want and not have to be at 9000-9500rpms the bike is more comfortable to ride. Bigger bikes have bigger gear windows , certain gears are the sweet spot and the gears above and below are a no go. With this bike the gears have pluses and minuses. 3rd is a bit short, but 4th seems to still give good torque delivery even though the rpm’s are on the lower side. Bike might be good as a 5 speed I don’t know. Just with my tests as mph changes depending on road constitution the 3rd gear forces you into high revs a lot. I had triumph 675 Daytona r that I could stay in 2nd all day, you could do 65mph before needed to shift. But at least with the 390 you can ride it differently and try different gears and rev it differently.
@aidenvids4247
Ай бұрын
Congrats on 10 subs
@zjanny264
Ай бұрын
Where did you buy it? I only find the product page, but no way to buy it
We appreciate it 100%!! We have more ideas coming soon.
@michaelrieser9928
Ай бұрын
Thank you Sir!, I’ve been waiting for some videos on a good slip on for this new 390 duke. Sounds great, send a short out on what it sounds like with any baffles out. FYI the quickshifter is pretty cool, flawless and great for that 1st-3rd when you’re leaving from a stop. Also great because you have to shift a bit more then say a 990 duke.
@Bama_390
Ай бұрын
I will get a short up maybe tomorrow without baffles for ya. I just hit the 600 mile service this evening so I will be heading to the dealer to unlock the quick shift this week. I’m really surprised how fun this little bike is
@michaelrieser9928
Ай бұрын
@@Bama_390 yep, really fun, I’m 58 come from a long line of 1000cc naked bikes. Latest one a used 2007 ktm 990 super duke. But repair troubleshooting and bills were frustrating, so I needed something with a low cost of ownership. Man this bike can rail the backroads and twisties. Just as advertised, alittle light and small for the freeway, but plenty of power to ride at 65-85mph. Would like to get that new 990 down the line but this 390 delivers very unique punch. And all the aftermarket parts are cheaper than the larger bikes. Next service 6000 miles, crazy! Plus 54mpg.
@julianccx_
Ай бұрын
Yo man, i ordered de same exhaust from eBay and i returned it because they sent me the 2021 model so now i have to wait like a week and im so hyped. I didnt expect such a good sound🥰 can you tell me if its whit the db killer on?
@cyrankowski22
29 күн бұрын
Hi which cat delete did you add ? IS a cat delete for exemple werkes compétition for the 2023 model Can fit ?
Пікірлер