Thought drip cap was installed behind the wall sheathing
@johnmurphy3708
2 ай бұрын
I want to watch a video that shows how you been The Metal to look like the brick mode
@johnmurphy3708
2 ай бұрын
How did you bend the metal
@johnmurphy3708
2 ай бұрын
How do you bend your metal
@CarlBeauregard-ub7sn
2 ай бұрын
Personally, I would add a bead of sealant between the window frame and the wood sill, to push the metal into. This will look nice for now, but wind-driven rail will get behind that metal and rot the exterior wood sill out. I have replaced many sills due to no sealant at that point. Also, I fold the metal down parallel to the sheathing, underneath the sill, so that you can kick water out on top of the siding, in the event that water is driven into that area. On the end folds, I fold the underside up instead of cutting it off, as that is another vulnerable area.
@coralpetals
8 күн бұрын
Would be great if you posted a video showing your method. Thank you!
@PagingDrSwiss
4 ай бұрын
Beautiful!!!!!
@jjohnson7859
5 ай бұрын
Do you suggest caulking? I understand caulking underneath does not make sense because rain flows down not up and condensation can escape from the bottom but what about the top edges of the aluminum trim?
@CarlBeauregard-ub7sn
2 ай бұрын
You definitely want a bead there to push the metal into. Read my comment for other tweaks that would be a good idea.
@highqualityhomemaintenance7565
6 ай бұрын
kzitem.info/news/bejne/z4VnsWl8h2iQfJg
@malikgarrett2036
6 ай бұрын
What size nails or nailer should I use
@mbishton1
7 ай бұрын
Seems like some flashing tape over the flashing wall flange would be a good idea. No?
@CoolIHandIMatt
8 ай бұрын
Ok its an old video but what about the big gap where the gable end rake meets the eaves??
@canadianrooster6598
10 ай бұрын
No soffits???
@primrosehenry7654
Жыл бұрын
Is that caping?
@walterdiaz2003
Жыл бұрын
a 13 years old video and still rocking.
@philipzanoni
Жыл бұрын
I need a video with the same process but the aluminum piece is a 3 step bend to cover the crown moulding that's on the fascia. How does that work?
@Tonisuperfly
Жыл бұрын
Thank you! This is so much better than what I was going to do to my wooden sills...
@ThomasFlyswatter212
Жыл бұрын
The machine you use to fold the coil what is called? Beautiful job by the way
@GreatWaterCircus
Жыл бұрын
Hey thanks excellent video
@ehsanshahidiehsan
Жыл бұрын
Great video. If you have fiber cement siding already installed, how would you go about installing the drip cap?
@jackfarrell4727
Жыл бұрын
Thank you for the video
@Carlsings
Жыл бұрын
When installed with wood siding I thought the back flashing was supposed to be under the siding. You're showing this on top of the siding or whatever that house has on the exterior, no? What to do with siding when installing a drip cap over windows and doors?
@highqualityhomemaintenance7565
6 ай бұрын
Yes, it goes behind the siding. Here is my video showing it going behind the vinyl siding. kzitem.info/news/bejne/z4VnsWl8h2iQfJg
@melodyfleck9368
Жыл бұрын
how do you do this if you have vinyl siding above the door?
@blindwelcome
Жыл бұрын
u have to remove the siding...i'm in the same boat lol
@WorkinWithWood
11 ай бұрын
It’s wrong
@wisconsinwoodsman1987
Жыл бұрын
Short, sweet, simple. Thanks.
@izzibizzi308
2 жыл бұрын
I have been looking for a video showing this for months. Thank you
@gfriedman99
2 жыл бұрын
Is this inside or outside?
@pochuanhsing2466
2 жыл бұрын
Where to buy the material with the right shape? Or I should try to get a brake to fold by myself?
@stanmars8254
2 жыл бұрын
Did you bend your own brick mold profile
@valeriespies4086
2 жыл бұрын
saved me lots of frustration thanks easy to follow and to the point
@joeshuge
2 жыл бұрын
it's no longer code though
@carloscamacho9701
2 жыл бұрын
fuckin butch! u do the sill first than sides n than top smh. trash
@Paula-vr5rm
2 жыл бұрын
i had new siding put on my house and they did not put any flashing on top of my window only the plastic paper with that silk tape next to my windows 🙈🙈🙈🙈
@jludtxs
2 жыл бұрын
No caulk? My roof doesn't have an overhang. Can the top go under the siding?
@highqualityhomemaintenance7565
6 ай бұрын
I added a video that shows how I do it. It was just recently added.
@markturner7459
2 жыл бұрын
American....if in doubt, use nails....
@katdekarachisimba1056
2 жыл бұрын
Very concise and clear video. Thank you
@Unaomnia01
3 жыл бұрын
A bunch of these other videos were talking about making end dams and yesterday and today I was on a crew that did it the way you are doing it instead - wonder what the trade off is?
@joeshuge
2 жыл бұрын
this is no longer code and does nothing to prevent water penetration.
@highqualityhomemaintenance7565
6 ай бұрын
kzitem.info/news/bejne/z4VnsWl8h2iQfJg End dams are used when the cap m meets brick or some other building material.
@brianhusted3909
3 жыл бұрын
Excellent, brief and to the point. 10 out of 10
@patriciaacreman909
3 жыл бұрын
Do the flashing prevent waves in the fascia
@541beausham
3 жыл бұрын
I do it a little different idk I was looking for other ways! Lol...the tab you cut off I leave I bend that down first then the bigger side! Slide it on top the window mark the other side bend both flaps starting with the front one and folding the bigger one over then calk where it goes and nail her off then I put another piece of window tape over it without staples and continue siding!
@junlong68
3 жыл бұрын
Why not pvc
@jaydenbrumous2582
3 жыл бұрын
In my first work I always used Stodoys plans.
@deankasam427
3 жыл бұрын
Nice video. Thanks for sharing 😊 Also found this one helpful. kzitem.info/news/bejne/lKd51WGYgH6oeoI
@michaelwas8549
3 жыл бұрын
Nice vid👍
@yamanotakeshi
3 жыл бұрын
Thank you for uploading the video. It helps me to save money.
@RyanJensenEE
3 жыл бұрын
remember to wear gloves when working with sheet metal such as this drip cap.
@jianping5976
3 жыл бұрын
if we bend the corner like this, what if the rain runs through?
@megwienser3347
3 жыл бұрын
This video was exactly what I was looking for. Short, simple and to the point! Thank you.
@epstv7254
4 жыл бұрын
I wouldn't cut so much! I can just cut 1/4 of n inch or tops 3/8 ,slide it in there and seal it up I dont wanna weaken anything but good trim tho
@killer4981
4 жыл бұрын
Dude I make those lol
@rickeykeeton71
4 жыл бұрын
Should the aluminum not fit UNDER the storm window?
@jacksoxman9000
4 жыл бұрын
Can you paint the flashing? Does it come in colors?
@growforit8736
4 жыл бұрын
Wouldn't you seal the back side with calk, I would.
Пікірлер