Blaise Barrette
I am a maker. There is nothing I love more than creating! Of all the tools I have, Fusion 360 is at the top of the list when it comes to unleashing my creativity. Since I discovered it, I create more and better! I built my own 4’ X 8’ router CNC and also my delta 3D printer. I am a mentor in a FIRST robotics team and I give Fusion 360 lessons to my team mates. I work as a machinist with CNC machines and I am currently restoring an old Fadal CNC.- 30:16
- 2 жыл бұрын
Part 40 (Aligning X axis ball screw)
- 20:31
- 2 жыл бұрын
Part 39 (Adjusting front gibs on the table)
- 6:40
- 2 жыл бұрын
Part 37 (Adjusting the gibs under the saddle)
- 15:57
- 2 жыл бұрын
Part 36 - (Time for lube!)
- 16:01
- 2 жыл бұрын
Part 35 - (Homing, sweet homing!!!)
- 47:47
- 2 жыл бұрын
Part 34 - (Looking at the electronics)
- 7:56
- 3 жыл бұрын
Using the end mill as an indexing stop to locate your stock
- 20:27
- 3 жыл бұрын
Part 33 - (Levelling the machine)
- 30:58
- 3 жыл бұрын
Part 32 - (It's alive!!!)
- 17:44
- 3 жыл бұрын
Part 31 - (Installing the Y axis ball screw)
- 19:28
- 3 жыл бұрын
Part 30 - (A justing the center gibs on the saddle)
- 18:53
- 3 жыл бұрын
Part 29 - (Trimming the turcite)
- 15:42
- 3 жыл бұрын
Part 28 - (FADAL project update)
- 19:19
- 3 жыл бұрын
Part 27 - (New angular contact bearings for Y axis ballscew)
- 20:28
- 3 жыл бұрын
Part 26 - (Brand new way lube for the saddle)
- 7:37
- 3 жыл бұрын
Part 25 - (Metering valve values for the saddle lubrication)
- 9:40
- 3 жыл бұрын
Part 24 - (Repacking X axis ball screw)
- 13:08
- 3 жыл бұрын
Part 23 - (Repacking Y axis ball nut)
- 17:48
- 3 жыл бұрын
Part 22 - (Looking at the Y axis Ball Screw assembly)
- 7:37
- 3 жыл бұрын
Part 21 - (Introduction to the 3D model of the machine)
- 3:06
- 3 жыл бұрын
Part 20 - (Installing the tool changer casting)
- 1:59
- 3 жыл бұрын
Part 19 - (Inspecting the underside of the table)
- 9:56
- 3 жыл бұрын
Part 18 - (Painting)
- 1:13
- 3 жыл бұрын
Part 17 - (What's that?)
- 4:30
- 3 жыл бұрын
Part 16 - (Removing the spindle 2 of 2)
- 18:22
- 3 жыл бұрын
Part 15 - (Removing the spindle 1 of 2)
- 4:18
- 3 жыл бұрын
Пікірлер