Great video, I noticed my oil pan gasket was leaking a bit during my last oil change, I'll definitely be doing this job very soon
@dirtyboy8336
8 ай бұрын
I just don’t Understand why Most of Guys that Fix on vehicles never wear protection glasses so any dirt or fluids dropping in their eyes
@RichardJones-js6jp
10 ай бұрын
How you took the panels off
@caydenoliver6202
5 ай бұрын
For real lemme know if u can figure that out pleaseee🙏🙏i just got subs laying around right now😂
@GETNYCEAUTO
Жыл бұрын
Thanks for this Helpful Video..Just did mine the other day Watching this and helped know what to unplug etc...Bigggg Helpppp and Easy to do
@babygoat9251
Жыл бұрын
what size are the front speakers
@Florida941Boii
10 ай бұрын
6x9
@jonathanharmon1580
Жыл бұрын
I am literally doing this right now for a Christmas present to my sons mom thank you for the advice and i wish i had watched this before i removed the radiator thanks again this helped a lot
@malcolmveganlifewoods1399
2 жыл бұрын
I have the 1994 dodge ram B250 trying to remove the oil pan is a pain, not enough clearance between the outer bottom oil pan and the cross member I haven't t removed the oil dipstick maybe that's what is holding the oil pan. I'm not for sure, I will try again the next day and give it a go any tips or suggestions to help pull this thing out?
@chrispeters4405
2 жыл бұрын
without having to lift the engine! you have to do the main bearings
@barrybennett1292
2 жыл бұрын
If you have fluctuating oil pressure, it also pays to check your pressure sensor and connector before dropping the pan.
@yeddyidk9707
2 жыл бұрын
Thank you sir. Saved me 3,000
@luckylascala7572
2 жыл бұрын
You said V8?
@jesusalvarezsayula1784
2 жыл бұрын
Yes, v8 5.9
@luckylascala7572
2 жыл бұрын
@@jesusalvarezsayula1784 I thought come inside a straight 6
@joshcross4739
2 жыл бұрын
shallow mount 6.5 will work also 👍
@raysgarage7260
2 жыл бұрын
Thanks for doing this. I couldbt hear what you saying, but I learned fron this how to get to those back speakers. What new ones did you put in? Tons videos on the 4 door infinity models, so solid of you to put the door version up.
@jesusalvarezsayula1784
2 жыл бұрын
Thanks man yeah i shouldve spoke a bit louder lol. I got the inifinty reference speakers they sound so good.the voice and mids are very clear
@tomhutchins1046
2 жыл бұрын
Or a tooth off a nylon timing gear. The oil pressure going up and down was probably the sender
@tomhutchins1046
2 жыл бұрын
Looks like a chewed up valve seal. Umbrella type. Some are white plastic
@billjunking_fool5549
2 жыл бұрын
I am guessing that's part of a timing gear
@tc50cal888
2 жыл бұрын
Great video! Thanks for sharing!👍
@1141Nan
3 жыл бұрын
Is this a 2wd or 4x4?
@jesusalvarezsayula1784
3 жыл бұрын
Its a 2wd
@mogeking56
3 жыл бұрын
She said take the dipstick out before having the baby. That makes sense to me 😵💫🤓
@omar__0rtega409
3 жыл бұрын
You mentioned that it was struggling to accelerate was this really the solution to that my pressure has been dropping as well
@jesusalvarezsayula1784
3 жыл бұрын
Yes it worked for me, i think that rock blocking the screen was the actual problem lol. But just went ahead and changed the pump anyway
@jesusalvarezsayula1784
3 жыл бұрын
Also my oil pressure sensor was burnt up pretty bad so i changed that too.
@martinvalencia6141
3 жыл бұрын
Did your truck get fixed with the pump and pickup replacement?
@jesusalvarezsayula1784
3 жыл бұрын
Yeah it works good now, i also had a burnt up oil pressure switch that i changed out too.
@keithsims86
3 жыл бұрын
@@jesusalvarezsayula1784 Did you prime the pump?
@Namelesshero-e8k
Жыл бұрын
@@keithsims86 how do you do that
@TheSmoothGrind
3 жыл бұрын
Nice video. I am going to change my oil pan in my 2001 ram plow truck next week. The pan rusted out and is pissing oil. I was hoping to do it in spring/summer with nice weather, but I can't wait any longer and still use the truck. I appreciate your info on bolt sizing and your video of you dropping the pan. I was worried it wouldn't clear the cross member, but looks like you got it out of there fairly easily. Thanks again!!!!
@jesusalvarezsayula1784
3 жыл бұрын
Thank you ! Its not too bad, just sucks that theres very little room to workaround. Hope it helps you out thanks for watching👍🏼👍🏼
@tylerknight4723
2 жыл бұрын
Hell wait till summer I'd use JB weld all over the bottom of the oil pan basically create a shell that way you can make it to at least spring just don't go near the oil pan bolts
@TheSmoothGrind
2 жыл бұрын
@@tylerknight4723 Might of been able to do that, but meh, I don't like rigging stuff. I swapped it out last January in like 10 degree weather on my driveway. It wasn't so bad.
@matthewdougan3816
3 жыл бұрын
It was a pain in the ass to put in
@jesusalvarezsayula1784
3 жыл бұрын
It really is. It helps to use zip tied in a few bolt holes to hold the gasket in place
@12569781cdn
3 жыл бұрын
@@jesusalvarezsayula1784 really appreciate the zip tie idea!
@danielwillover
3 жыл бұрын
You should do a video on how to put it back on but changing the rear main seal also
@jesusalvarezsayula1784
3 жыл бұрын
I will look into it !
@donking8662
3 жыл бұрын
@@jesusalvarezsayula1784 did you figure out how to put rear main seal in ??
@jesusalvarezsayula1784
3 жыл бұрын
@@donking8662 hey man, no i havent actually its been sitting for a while im in the process of painting it but if i do end up doing the seal i will post a video
@donking8662
3 жыл бұрын
10 4 that will be a big help for me , im finna have to do the seal on my 01 dodge 4x4
@1249firefighter
3 жыл бұрын
Thanks for the video, it was extremely helpful.
@jesusalvarezsayula1784
3 жыл бұрын
Glad it helped you out !!
@1249firefighter
3 жыл бұрын
Yours must be a manual. I have an automatic and on the bottom side if the radiator you have to disconnect the two transmission fluid metal hoses as well. Have a different container for the transmission fluid to drain into. Which ever you decide to drain first doesn't seem to matter.
@jesusalvarezsayula1784
3 жыл бұрын
Yes it was a manual trans in that one. That bottom port on the radiator on mine was blocked off
@martinhudson2657
4 жыл бұрын
When your taking about your gasket oil pan gasket I seen it, check video the part that unexplaining about the gasket
@jesusalvarezsayula1784
4 жыл бұрын
Will be painting this car soon!
@martinhudson2657
4 жыл бұрын
As soon I looked at your video
@jesusalvarezsayula1784
4 жыл бұрын
Ill take a look at it, thanks 🤙
@martinhudson2657
4 жыл бұрын
Look like you have a broken engine mount bolt too, looks like it, key word
@jesusalvarezsayula1784
4 жыл бұрын
What minute did you see it at, i should probably check it out!
@flukesofevolution5693
4 жыл бұрын
I have a 1995 ram van 2500. 5.9 engine. I was told I had a bad oilpan gasket and it was easy to replace so I bought all the stuff I needed and tried to do it myself. Didn't know I had to lift the engine. I got the pan detached but I can't remove it. There's too many obstructions. I removed the starter and the brackets holding the transmission to the engine. The pan won't drop down. Im not a auto mechanic. Just your average DIY cat. Does anyone have any advice? I'd sure appreciate it. Thanks.
@stanleygardner146
4 жыл бұрын
Jack the engine up with wood underneath the oil pan. Unscrew the motor mounts and jack up and put wood under the motor mounts
@johnfitbyfaithnet
3 жыл бұрын
@@stanleygardner146 great tip
@radicalron65
4 жыл бұрын
You need ball joints and tierod ends and an alignment.....thanks for the radiator video....
@jesusalvarezsayula1784
4 жыл бұрын
i have actually passed on the car to a family member ! Butthank you for the feedback hopefully it helped out!
@Trogdor-mo6tx
4 жыл бұрын
This worked for me! Tha ks for posting!
@jesusalvarezsayula1784
4 жыл бұрын
Glad it helped you out !! Thanks for watching🤙
@shawnb8234
4 жыл бұрын
I have the same truck did u have to Jack up the motor to get the oil Pan out
@jesusalvarezsayula1784
4 жыл бұрын
Sorry bout the late reply, yes i did my truck is lowered 3 inches up front
@jesusalvarezsayula1784
4 жыл бұрын
@the Accountant the lowering? I bought it like that but i believe its a 3 inch lowering spring and djm control arms or calmax.
@Rchan925
3 жыл бұрын
@@jesusalvarezsayula1784 I'm wondering the same question. Jesus did you have to jack up the engine? Not is ur truck lowered
@jesusalvarezsayula1784
3 жыл бұрын
@@Rchan925 fortunately no i didnt have to lift the engine up, i was able to get it out witj engine in place, mine is a 1994 5.9, 2wd..46rh trans if that helps.
@Rchan925
3 жыл бұрын
@@jesusalvarezsayula1784 thank you It does
@timlitke3701
6 жыл бұрын
Thank you! THis was perhaps more helpful than showing removal. I appreciate you explaining exactly what you did. I think I can do mine now! THanks for taking the time to video and post this. I also appreciate it was only 4min, not 17 or 30 :)...btw...you dont happen to have a good one for replacing the heater core on a 93 accord perhaps?
@jesusalvarezsayula1784
5 жыл бұрын
Hey tim sorry I actually hadn't checked up on this video in a long time hopefully by now you got the heater core going as I dont know how to do it, and thank you I'm glad it was helpful sometimes just going over something by explaining and showing is easier for some not for others glad it helped!
Пікірлер