carvingonwood.c... Roughing out the design helps us to establish where each element is on its respective level. If you have not watched video number four (4) on establishing the initial levels you should do that now.
When roughing out the design we are using a larger round carbide burr to quickly remove material to get the design to resemble what we want it to be.
This helps us to get an overall idea of what the finished project will look like, but there is still much that needs to be done.
When roughing out the design be very careful that you follow the cuts that you have already established. Hand control and tool control is very important at this stage to ensure that you do not destroy your design, or have to modify it to cover up any mistakes.
Roughing out the design is the first step in a three-step process of establishing the design, getting it roughed in where we want it, and then refining it to a polished finished carving.
Depending on the design that you are working with you may need to use a smaller round carbide burr in order to accomplish the roughing out stage. For this daisy carving, however, using a large round carbide is sufficient to establish the initial rough out of the daisy.
This is the fifth video (05) in a 12 part series that I have created to help new power carvers understand the basic steps of relief power carving with a high-speed hand piece.
The steps to complete a beginner level power relief carving are:
01 -- Daisy Carving Introduction
02 -- Outlining and Transferring the Design to the Wood
03 -- Removing the Background
04 -- Establishing the Initial Levels of the Design
05 -- Initial Roughing Out of the Design
06 -- Refining the Pedal Detail
07 -- Finalizing the Details of the Pedal
08 -- Caving the Center of the Daisy
09 -- Carving the Leaves
10 -- Stippling the Background
11 -- Edge Clean-up and Final Quality Check
12 -- Sealing and Finishing the Carving
You can follow along with this carving video series right here on KZitem or, better yet, follow along at carvingonwood.c....
If you want to follow along with me as I carve the Daisy be sure to visit Carving On Wood.com where you can get your copy of the full sized image of this Daisy Project.
On my website I detail my thoughts at each step along the carving journey to help you understand the carving process more fully. You can also comment on the videos in the comments section, receive replies, and read what other people have to say.
If you are watching this video before all of the videos in the series are uploaded to KZitem -- stay tuned. Each week I will be uploading more videos in the series, as well as, additional videos related to power carving in general and relief power carving specifically.
Be safe, have fun, and enjoy every minute you spend power carving.
Throughout this video series you will here music at one point or another. All of the music heard is from an amazing artist names Josh Woodward. He is the ultimate "One Man Band" creating all of his music himself in his personal studio.
To learn more about Josh or to listen to his music you can find him at: www.joshwoodwar...
You can also see his awesome music videos on his KZitem Channel at: / joshwoodward
Yes, his music is free, but drop some pennies his way if you enjoy what you hear.
Негізгі бет 05 Relief Power Carving - High Speed Engraving - Roughing Out The Design
No video
Пікірлер: 4