𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East ScAn | KU BanD | French Channels List | Master Decoder
To scan for French channels on Eutelsat 16A at 16° East using the KU band, you will need a satellite receiver (master decoder) and a satellite dish pointed at Eutelsat 16A. Here's a detailed guide on how to scan for these channels:
Equipment Needed
1. **Satellite Dish**: Properly aligned to Eutelsat 16A at 16° East.
2. **LNB (Low Noise Block)**: Compatible with the KU band.
3. **Satellite Receiver (Master Decoder)**: Capable of scanning and receiving KU band signals.
4. **TV**: Connected to the satellite receiver.
Step-by-Step Guide
#### 1. Align Your Satellite Dish
- **Positioning**: Ensure your satellite dish is pointed at 16° East. Use a satellite finder tool or a mobile app to help with alignment.
- **Adjustments**: Fine-tune the azimuth (left/right), elevation (up/down), and skew (rotation) of the LNB to optimize the signal strength.
#### 2. Connect Your Equipment
- **LNB to Receiver**: Connect the coaxial cable from the LNB to the "Satellite In" port on your satellite receiver.
- **Receiver to TV**: Connect the receiver to your TV using an HDMI or AV cable.
#### 3. Power On and Setup Receiver
- Turn on your satellite receiver and TV. Switch your TV to the appropriate input source (HDMI or AV).
#### 4. Access the Satellite Receiver Menu
- Use the remote control to navigate to the receiver's menu. Look for options like "Installation," "Setup," or "Antenna Setup."
#### 5. Select Satellite and Configure Settings
- **Satellite**: Choose "Eutelsat 16A" or manually enter the satellite position (16° East).
- **LNB Type**: Select the appropriate LNB type (usually "Universal" for KU band).
#### 6. Enter Transponder Details
To scan for specific French channels, you may need to enter the following transponder details manually. Here are some transponders known to carry French channels on Eutelsat 16A:
- **Frequency**: 10804 MHz
- **Polarization**: Horizontal
- **Symbol Rate**: 30000 kS/s
- **FEC**: 3/4
Other potential frequencies to try:
- **Frequency**: 11054 MHz
- **Polarization**: Vertical
- **Symbol Rate**: 30000 kS/s
- **FEC**: 2/3
#### 7. Start Scanning
- After entering the transponder details, select "Scan" or "Search." The receiver will begin scanning for channels on the specified transponder.
- If there’s an option to scan all transponders, choose it to ensure you capture all available channels.
#### 8. Save Channels
- Once the scan is complete, save the found channels. Your receiver should display a list of available French channels.
#### 9. Fine-Tune and Rescan if Needed
- If you do not find all expected channels, adjust the dish alignment and rescan. Small adjustments can significantly impact signal strength and channel availability.
Troubleshooting Tips
- **Weak Signal**: Ensure there are no obstructions (trees, buildings) blocking the dish. Fine-tune dish alignment and check cable connections.
- **No Signal**: Verify the dish is pointed at the correct satellite. Double-check the transponder details and LNB configuration.
- **Intermittent Signal**: Weather conditions can affect satellite signals. Ensure the dish is securely mounted and cables are in good condition.
By following these steps, you should be able to scan and list French channels available on the Eutelsat 16A satellite at 16° East using the KU band.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
Негізгі бет 💎 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East ScAn | KU BanD | French Channels List | Master Decoder | Pbteck
No video
Пікірлер: 2