Thank You for showing what the location of the caliper mounting bolt with the rubber tip. That was the info I was looking for.
@CharlesAndCars
4 жыл бұрын
Glad it helped
@willdwyer6782
5 жыл бұрын
Rear caliper pins are 14mm. Rear bracket bolts are 13mm. Front caliper pins are 15mm. Front bracket bolts are 19mm.
@timothysimpson912
2 жыл бұрын
True on the rear. My front all 4 bolts were 15 mm (2005). I also saw someone do the fronts on a 2005 and were 15 and 18. AutoZone video shows 15 and 22... too funny. I think it may depend on whether a base model LS, LT, or SS model.
@grillmeasteak
Жыл бұрын
Did you need to open the brake reservoir when you pushed the piston back in, or did I miss that?
@CharlesAndCars
Жыл бұрын
No, didn't need to.
@gregl2249
5 жыл бұрын
Great Video man---thank you very much
@CharlesAndCars
5 жыл бұрын
glad it helped
@michaeldvorak5556
4 жыл бұрын
Very good demonstration. It looks like your missing a dust shield. One thing to think about. When you squeeze the caliper and force the brake fluid back to the master cylinder your sending fluid that has been baked and broken down by heat. This fluid will also contaminate your ABS system. I prefer to expel the fluid when I squeeze the caliper and add fresh fluid into the reservoir.
@Kipple2088
6 жыл бұрын
I did the job , but forgot to spray down the rotors to remove the oily stuff .
Пікірлер: 11