www.williamsmobileclutch.co.uk 🇬🇧 Submit enquiry for a price a repair date. Thanks for watching.
@kellytaylor3134
Жыл бұрын
@@lajostoth8341 you don't have a clue
@jemmace2586
Жыл бұрын
Bleeding the master cylinder, that was odd, not like bleeding brake's, what's the thinking there, with pumping the clutch pedal/master cylinder and there not being a steady stream of fluid going through the pipe attached to the bleed valve? I know you over filled at the brake/clutch fluid reservoir to pull the fluid through while you pumped from the master cylinder side. The top up pipe going from the reservoir to the master cylinder then onto the slave in the gear box. That's the bit that confuses me haha. I thought we're meant to push the clutch pedal down, hold it there close the bleed valve, raise the clutch pedal, open the bleed valve and repeat till a steady stream of fluid is seen in the pipe attached to the bleed valve. Sorry mate. Not being funny here at all, just baffled with how that works the way you do it and it obviously being correct.
@frfrpr
Жыл бұрын
This dude is no slouch on clutches, filming and editing. His filming and editing are some of the best on KZitem.
@WMCS
Жыл бұрын
Thank you.
@game4alaughman
2 ай бұрын
@@WMCS Hey Kevin, any videos on 2014 octavia 2.0 tdi DSG or golf’s for replacing DMF ?
@christopherkelly106
Жыл бұрын
I’ve probably done about 6/7 of them 02M/02Q boxes and they are very heavy (63kgs roughly) the way you just pulled it out 😂 that part takes me about half an hour on my own! Good strength sir
@WMCS
Жыл бұрын
Chris you’re absolutely right. They are quite heavy. Correct me if I’m wrong but I think this particular box is used in the 2L suv range VAG’s biggest manual gearbox.
@joshlehan8057
Жыл бұрын
Absolutely amazing work 👏 I struggle to change my oil and filter on the drive way you are seriously skilled 🙏
@user-pe9zi2ks3d
Жыл бұрын
Thank you. Great job. Everything is clear and to the point.
@WMCS
Жыл бұрын
Thankyou.
@KwangDonJEONG
Жыл бұрын
Today's video was good because it showed the process in detail. I would appreciate it if you continue to share like this.
@WMCS
Жыл бұрын
subscribe and access full repair videos on the channel. 🍻
@jemmace2586
Жыл бұрын
KAW works like a military operator, turns up, wherever... Does the job efficiently with the knowledge and tools to get everything spot on. 10/10 👍
@WMCS
Жыл бұрын
Thanks Jem really appreciate the feedback 🍻
@brianmason8400
9 ай бұрын
Can't say anything that hasn't already been said probably thousand times. Splendid work !!! I've done a few clutches on my back myself, they're no easy tasks. Have a great one.... take care of yourself and your body !!!!
@kamsab4018
Жыл бұрын
Merci pour cette super vidéo. Les détails sont excellents. Toutes les étapes de démontage et remontage sont très bien filmées. De ce fait, le travail sera beaucoup plus simple...MERCI🙏🙏👍
@WMCS
Жыл бұрын
Thank you.
@stevensmith3061
Жыл бұрын
I salute you sir for doing this for a living.hard graft outside.loving the videos.
@drwatson1234
8 ай бұрын
This guy is good! Amazing how many Brits drive manuals and in the USA basically no one does except for a few sport models.
@WMCS
8 ай бұрын
Nothing like driving a manual .. ultimate 🍻😁😁
@mikhaillindan9091
11 ай бұрын
Amazing professional, takes the gear box and puts it back on alone, with his hands like its a bottle of bear, its a 50-100kg gear box!!!
@n.martin5202
Жыл бұрын
Great video dude! It's amazing the way you work. Keep doing it!
@WMCS
Жыл бұрын
Thanks for the feedback.., very much appreciated.
@agaticdaniel
Жыл бұрын
Great job....greetings from Croatia
@Nypartcannon
Жыл бұрын
Hope we can clutch on to this milder weather take care brother
@WMCS
Жыл бұрын
For sure getting better. Nicer getting on the road in the mornings too.
@user-qb3gd4ok1x
Жыл бұрын
Real heroes exist.
@GRAYCURRYKITTENS
5 ай бұрын
Great video man 👍👍
@maxthecaddy8451
Жыл бұрын
Excellent and a thumbs up from me buddy 👍
@kangkanmac
Жыл бұрын
hello i have seen your clutch replace video after many days
@seyedrozbehsiros4386
Жыл бұрын
Hello, Mr. Kevin, please post the full video of disk replacement and the page of the peso 206 clutch
@josepinto9416
Жыл бұрын
Salut Kévin encore bravo pour le travail que tu réalise car tu fait vraiment du bon travail surtout propre ordonnée et très professionnel car moi même mécanicien je suis impressionné de tout ce que tu fais
@WMCS
Жыл бұрын
Thank you very much for the words of encouragement.
@webpro607
5 ай бұрын
What tool is that 30:27? Can you put a link where i can buy it please?
@richardjohnston6129
11 ай бұрын
Excellent video! I'm tackling this job this weekend. What size multispline tools did you use on the half shafts and the flywheel itself? Judging from the video, there are only regular nuts and bolts used everywhere, eles?
@kamar317
Жыл бұрын
t es trop fort
@JONNYMOORE10
10 ай бұрын
Loving your work mate, you’re a master. >…one thing I’ve noticed though, you mostly spin your ratchet before locating the head of the nut…..why is that?…..
@WMCS
10 ай бұрын
To crack the bolt off.
@friendcars1711
Жыл бұрын
Kevin why you don't use Locktit This is very important with a torque wrench 💯💥💥💥
@WMCS
Жыл бұрын
That’s what she said ..🍻
@DB.Schraubergott
Жыл бұрын
😁👍 Das war doch wohl Spielzeug für Dich 😉
@WMCS
Жыл бұрын
It was a fun repair. My favourite vehicle to work on are VAG and BMW’s.
@rickwoodruff8211
2 ай бұрын
What brand of sockets and ratchets do you use?
@powersterk
Жыл бұрын
Good job. ! 👍
@hansiejawol746
11 ай бұрын
Very good work. I have the mk8 they have the same setup I found out the hydraulic release bearing of these type of cars are not lasting very long. Get a very spongy feeling. Do you have any tips?
@mrgrumpy5116
Жыл бұрын
😊good job .. and a nice day 👍
@WMCS
Жыл бұрын
Thanks mr G.. you have a good one now 🍻
@shaagealgareb9189
Жыл бұрын
thank you
@MarkDaviesThailand
Жыл бұрын
Hi Kevin. Is that the same box as a 2015 Tiguan 2.0 Diesel ?
@WMCS
Жыл бұрын
Yes it’s the same box… and the semi auto also
@MarkDaviesThailand
Жыл бұрын
@@WMCS Thanks Kevin. CSC failed at under 40k - gradual loss of pedal height then eventually stayed on floor - clamped flex hose to eliminate master cylinder and pedal was solid so buggered - box out. Thanks so much for the outstanding camera work 🙏 and for showing how to correctly bleed the CSC 🙏🙏🙏 Mark.
@agostinomainetti1568
Жыл бұрын
Buongiorno kelvin sempre al top ,volevo chiederti se per fare frizione bravo 1.6 multijet bisogna levare la culla ,cioè il telaietto sotto grazie mille 👋👍comunque la mia ha 380000km frizione ancora originale ,✌️
@1.9tdilove71
Жыл бұрын
Superb video friend. Plz suggest which clutch plate pressure plate and flywheel is suitable for 2006 Skoda Octavia 1.9 tdi alh diesel 5 speed manual? Luk or sachs? There is little sound coming from gearbox side in morning when engine is cold for few minutes then becomes normal. Clutch is soft, gears engages normally. Little sound when clutch press, sound goes when clutch release. Plz suggest friend. Thanks
@WMCS
Жыл бұрын
This is my personal view. Sachs has a stronger rigid pressure plate very good if you’ve had a remap. Everyday driving smooth on the pedal and shifting due to an adjustable pressure plate LUK is good. Better on the left knee.
@1.9tdilove71
Жыл бұрын
@Kevin-Albert Williams Thanks friend for your expert advice. Here in India, mechanic is suggesting Sachs. And I am not sure how to identify original vs duplicate. Should I change everything? 100 k on odometer.
@colinlook5237
Жыл бұрын
Is there a reason you put rubber grease on the bolt holes of the transmission? I understand why you put it on the input shaft but I dont understand why you put it on the bolt holes. Can you enlighten me?
@f6r1dderb60
Жыл бұрын
Bonjour Kevin, merci encore pour le partage de tout le travail que vous faites, petite question une butée hydraulique peut elle émettre un claquement régulier au ralenti ? lorsque j'appuie sur la pédale le bruit disparaît d'après mon garage dit c'est normal il s'agit de pignons de boîte de vitesse qui tourne lorsque on lâche l'embrayage mais je ne suis pas certain de son diagnostic. Merci pour le retour ( Renault dci )
@TheWasi62
Жыл бұрын
Nice Videos! I like it! Can you make a video how to replace a clutch on Nissan Micra K12 from 2010?
@johnerdis5094
Жыл бұрын
Using many tips from your videos, my son and I changed the clutch and flywheel on his mk3 Leon 2.0 TDI. Bought a Sachs setup. The leaflet insisted upon the use of a sac tool to install friction and pressure plate. Got a cheap tool off the bay. I have never seen the use of one on this channel though. Can you enlighten me a little ? Cheers John
@WMCS
Жыл бұрын
Only thing to do using clutch alignment tool v/a SAC mounting tool Tighten the bolts in small increments always in an opposite pattern. The sac tool is basically pressing the plate down so you can tighten the bolts
@johnerdis5094
Жыл бұрын
Thank you Sir.
@nismo7622
8 ай бұрын
Hello. Can you tell me the model of the milwaukee ratchet
@WMCS
8 ай бұрын
It’s the high reach m12 fuel.
@nismo7622
8 ай бұрын
@@WMCSthx
@nismo7622
8 ай бұрын
1/2 ?
@YeiDCalle
9 ай бұрын
¡ Nice work ! . From Spain big Hello . ¿ do your work on automatic trans also ? ¿ What about Multitronic 0AW LLA ?
@WMCS
9 ай бұрын
Only manual transmission 🍻
@YeiDCalle
9 ай бұрын
@@WMCS ok Kev 👍👍
@1.9tdilove71
Жыл бұрын
Nice video dear friend. Hi bro from India. Need help. There is a little rattle noise coming from gearbox side in the morning in my 2006 skoda Octavia 1.9 tdi diesel alh 5 speed manual 110k on odo. After warm, noise reduces. And when I press clutch , little noise comes which goes after releasing clutch. Otherwise, clutch is normal soft, gear engagement normal. What you think I should do? do I need to change Dual mass flywheel along with clutch plt,pressure plt ,release bearing? Luk or sach? Is converting DMF to SMF is safe ? Thank you bro.
@alasdairhamilton1574
Жыл бұрын
Kevin, what procedure/ protocol do you do to confirm what the problem is before starting out? When do we get to see you do the Aston Martin, Bentley and Lamborghini 😃👍🏴
@WMCS
Жыл бұрын
Give me a workshop and I’ll tackle these high end cars and make a performance of it 😁🍻🍻.. I’ll usually ask several questions and can determine what it requires. Only thing sometimes that I ask customer to get a confirmation to eliminate master cylinder from their local mobile mechanic.
@alexisarmero6067
Жыл бұрын
LIKE LIKE LIKE
@JohnWayne-gl9ig
Жыл бұрын
That gearbox must be heavy and you must be quite strong. I dont know tho if a Toyota D4D 2.0L gearbox is heavier. What do you enjoy more Kevin, working on a VAG or Fiat?
@WMCS
Жыл бұрын
Definitely VAG engines., I need a lot more tools for any Fiat. Every single nuts and bolts are different size. Never understood why.
@johnerdis5094
Жыл бұрын
Oof! 63k and flywheel knackered.
@berkburak
Жыл бұрын
Great job! How much gear oil did it take when refilling? Is it 2.1 liters?
@WMCS
Жыл бұрын
I wouldn’t remember. Best to check.
@berkburak
Жыл бұрын
@@WMCS I wish you were operating in Sweden as well. Lucky you British people 😃👍
@FragGile
Жыл бұрын
Cats, always want to get involved 😼 Just out of curiosity was the clutch replaced because the DMF had failed?
@WMCS
Жыл бұрын
That’s it. Pretty much the case all the time. Failed DMF. On average from what I’ve noticed they last about 60-80K miles
@FragGile
Жыл бұрын
@@WMCS Cheers for answering appreciate that
@Ashab597
Жыл бұрын
Hi, tell me, do you consider cars with this motor and mileage of 200,000 km reliable and is it worth buying them, or is that all after such a run?
@WMCS
Жыл бұрын
I did one just yesterday with over 200K miles. Starts on the button and sweet as a nut. For sure
@michaelmcatee9471
Жыл бұрын
Would this be the same process for a 2015 Jetta tdi?
@WMCS
Жыл бұрын
Same as the golf. Checkout the channel.
@clintonwalker5000
Ай бұрын
💪💪💪💪⭐️👍top yob
@patrickdu5279
Жыл бұрын
un petit bonjour de la france william je voulais vous demander si vous aviez déjà changé l' embrayage d une mégane estate break de 2006 et si vous aviez fait une vidéo car c est mon véhicule actuellement cdl votre interlocuteur.
@WMCS
Жыл бұрын
Yes there is one on the channel. Have a look and let me know
@patrickdu5279
Жыл бұрын
Merci pour votre réponse rapide et bonne fin de journée 😊
@javieralvarez9146
Жыл бұрын
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻
@zmajeed786ify
Жыл бұрын
What transmission fluid do you use and how many litres ?
@WMCS
Жыл бұрын
75w90. I fill using level plug till it overflows. But I think just under 1L don’t quote me check as I do so many cars and it’s hard to remember
@zmajeed786ify
Жыл бұрын
@@WMCS thank you 🙏
@maverick507
Жыл бұрын
looking for a team to kidnap Kevin and bring him to France! 😂
@WMCS
Жыл бұрын
Been kidnapped already 🍻😂
@basaraking4929
Жыл бұрын
you forgot to lock the clutch tubing😮
@WMCS
Жыл бұрын
🫡yes sir
@dannyc9521
9 ай бұрын
63k miles and needs a clutch change who was driving that his wife 😂
@furqatabdujalilov8346
Жыл бұрын
👍👍👍👍👍👌👌👌👏👏👏👋👋
@denny8061
2 ай бұрын
oh my god, 65000 km change fraction! who drives?? hahaha
Пікірлер: 105