You should go into more detail. I enjoy this style of tattooing and I’m excited to try to stipple an entire tattoo. Never thought of it that way.
@TheKyle216
4 жыл бұрын
Hell yeah love the video I’m def gonna try a tattoo using ur method love the videos keep them coming
@joelgonzalez2315
4 жыл бұрын
Thanks a lot Bro... Apreciate It...👍
@1nsp3kt0rrGadG3T
3 жыл бұрын
Very good thank u! Keep making videos man!
@ChrisRavage
3 жыл бұрын
Thank you fam
@dayone269
4 жыл бұрын
Thank you
@DanielOrtiz-gk9uj
3 жыл бұрын
Great video man, thanks for the info. Quick question, what type of black are you using? Lining black? Black (grey wash)? Medium grey wash?
@always4eternity1
3 жыл бұрын
so to shade, you have to set the voltage a bit slower than what you would normally use when doing lines?
@ChrisRavage
3 жыл бұрын
Exactly that 🙌
@danielderungs9113
3 жыл бұрын
I would love to know how to do this stippling technique with a coil machine. Any suggestions?
@andyhowden7655
10 ай бұрын
So you stipple all the numbers on the clock in as well?
@ChrisRavage
10 ай бұрын
Everything
@ludovicmarchand5535
4 жыл бұрын
Great video. Did you ever tried the Bishop wand packer for 3RL? Thanks
@ChrisRavage
4 жыл бұрын
I haven't buddy, but it would go a great job
@ivanmendoza8457
4 жыл бұрын
Any longer stroke rotary machine you can accomplish i started with the thunder and know im using a bishop wand packer and sometimes ill use a sol terra the sensi drive on the sol terra makes it work perfectly for this
@rashaadmcclain288
3 жыл бұрын
For your line work, you use the same voltage from the stippling?
@ChrisRavage
3 жыл бұрын
No, for line work I use a higher voltage.
@OutdoorJunkie.
4 жыл бұрын
Hi. Very cool vidéo. I made very solid and constent line with all liner i used. 7rl-18rl bugpin or not. But for some reason, when i use 3rl, my line seems to be very patchy, uncunsistant... not solid. I chage the voltage, my hand speed and the deepness on my needle but that cant fix the problem. Its worst in area like throat, hand, knuckles. Do you have an idea why? Tanks.
@ChrisRavage
4 жыл бұрын
It could be the bearing in your machine buddy.
@mobinknox
3 жыл бұрын
Nice info brother
@mobinknox
3 жыл бұрын
When it's for black and grey you still have you drop technique set up for your greys
@ravage4804
3 жыл бұрын
Good info brotha. Do you use gray wash or just build up solid black
@ChrisRavage
3 жыл бұрын
I use wash treating it the same as a normal bng piece
@LazurayMusic
3 жыл бұрын
Hey bro your last response was super helpful...I just wondered if you could answer me another question I had...when tattooing a fatty area like the inner thigh/bicep or stomache...I've heard to get the line to go in properly you need to apply the 3 point stretch a lot harder...however...do you also need to adjust the needle depth in which you enter the skin, as the dermis layer on those particular areas differ from let's say a shin for instance...I noticed that some lines fell out in an area like that when healed (on myself of course)...if so, how much deeper do you need to go? Thanks again, your channel is awesome.
@ChrisRavage
3 жыл бұрын
Thanks man, glad you found it helpful. Yes you can go deeper in some places, but you still have to be weary of blow outs and skin damage..especially on lower liners like 3s and single liners. Any lining will require a good stretch, depending on the skin, more of a stretch will be required, the better the stretch the easier you will find the line goes in generally, but again it all depends on the type of skin, machine and hand speed also play into it, so those may need to be adjusted.
@ChrisRavage
3 жыл бұрын
If a tattoo line falls out, it happens, sometimes it's just the healing. But a better execution of line, stretch, machine and hand speed will go to the line sticking around
@kevincole7064
3 жыл бұрын
What’s the stroke you recommend on a coil machine? I can’t seem to find a good medium
@ramtv3001
3 жыл бұрын
great question
@absolute1020
3 жыл бұрын
2 or 3 above the kick-in voltage, do you mean 0.2 , 0.3 volts or 2 to 3 volts ? thanks!
@ChrisRavage
3 жыл бұрын
Sorry I should have specified a little clearer..if your machine kicks in at 3volts I would go to 5 or 6 not 3.1 to 3.3
@absolute1020
3 жыл бұрын
@@ChrisRavage thank you ! that is really helpful !
@roverrovert6406
4 жыл бұрын
Can you do stippling work with a coil machine ?
@ChrisRavage
4 жыл бұрын
Yes
@paulperrin2152
4 жыл бұрын
When doing heavy line work do you double line with a 3 and then fill in ??
@ChrisRavage
4 жыл бұрын
Yes buddy
@vincentbeeuwsaert
3 жыл бұрын
Exactly how I tackle boldines 👍
@TheSaddeqi
3 жыл бұрын
❤️❤️❤️
@vu5344
3 жыл бұрын
Do you have link to your needles
@ChrisRavage
3 жыл бұрын
They are just Kwadron needles, most suppliers sell them
@SteveMcoan
3 жыл бұрын
What's better, short stroke or long? :P
@ChrisRavage
3 жыл бұрын
Personally I use a shorter stroke in most cases
@stephoncjackson
4 жыл бұрын
💪
@khouriedwards1896
4 жыл бұрын
What if you recommended needle hang for 3rl stippling?
@ChrisRavage
4 жыл бұрын
I have around a few mm, nothing too drastic maybe 3mm
@davidpinto1195
3 жыл бұрын
Voice is to low
@ChrisRavage
3 жыл бұрын
Weird, seems fine when I play it back even without headphones. I’ll take it onboard tho, thanks for the feedback
@davidpinto1195
3 жыл бұрын
@@ChrisRavage thank you for your tutorials, yeah compared to the music is very low, or the music is very loud hehe cheers man
@davidpinto1195
3 жыл бұрын
Im very interested in this technique, am starting and Im damaging the skin too much with 3rl, but am gonna continue opraticing and finding my right speed, what speed did you use?
@ChrisRavage
3 жыл бұрын
@@davidpinto1195 I use around 6v and a soft hitting machine with a little give. But getting the technique also will help a lot
@D4NTH3M4N100
3 жыл бұрын
Voice is fine! When you used the white, was you going over solid black?
Пікірлер: 51