⚡️ WATCH NEXT 🛴 Varla Eagle One Unboxing bit.ly/2UdtMai 🛴 Varla Eagle One full review bit.ly/36ReR8Q 🛴 Varla Eagle One rugged clamp upgrade bit.ly/3zXe8PV 🛴 Varla Eagle One P settings bit.ly/3CLp3yB 🛴 Varla Eagle One vs Xiaomi bit.ly/3x0gRpM 🔷 My e-scooter FB group for Xiaomi M365/Varla Eagle One/Zero10x and any other scooters: bit.ly/2NMeXIY
@intershark2
3 жыл бұрын
Great video! One thing you pointed to the deck and said dont worry about the bolts on the bottom. When i first went over all my bolts the bottom of the deck had loose one. I would say check ALL bolts on the scooter.
@Movelectrics
3 жыл бұрын
Good thing for checking them Dana. Mine are all really tight compared to some of the smaller screws/swing arm nuts and suspension bolts. Those split rim bolts are a must check for sure. Thanks for sharing man ⚡️
@kojokamber8467
3 жыл бұрын
Awesome! was great to meet and go for a ride on Varla scooter !! Thanks for the honest review !
@Movelectrics
3 жыл бұрын
No worries Kojo ⚡️
@Vladi_AK47
3 жыл бұрын
Brother, thank you so much for this upload 👍 I got my Eagle1 today and no matter how tight I do these factory red clamps, the main shaft is still wobbly. Wondered if it’s defective 🤷♂️ Respect for your time wisdom and effort in making this vid 👊
@Movelectrics
3 жыл бұрын
Hi Andrey! Congrats on the delivery! The rugged clamp I think is definitely much better. When you tighten the stock clamps and even the rugged clamp, tighten one, then the other, then go back and forth until happy. There is also a 8mm allen bolt underneath that people have reported sometimes a small bit loose, so perhaps check that also. I would suggest joining the FB group for Varla owners if you ever need additional help from myself and others. It’s a learning process as time goes on so don’t be worried. Wear a full face also and enjoy! ⚡️
@t.c.pthecompletepackagellc21
2 жыл бұрын
Great Topic
@ProWrestlingGamer
Жыл бұрын
Is it normal for the back tire to have a click on every rotation? I just bought a used one and road it home to test it. It road smoothly and perfectly with no issues. I noticed the tire click about half way into my ride. Couldn't hear it at 1st because it was windy. Could you make a video on this if it's an issue and how to fix it? It's a very quiet click. I raised the scooter and rotated the back tire with my hand and found the exact spot where it clicks per rotation but can't see any issues.
@Movelectrics
Жыл бұрын
Can you post a quick video on my FB group of the clicking? Could just be the disc rubbing (common issue) Here is my group bit.ly/2NMeXIY
@pnsmexico
2 жыл бұрын
thank you. i just got mine today and was thinking about getting those issues so i will take care of them tomorrow
@Movelectrics
2 жыл бұрын
Glad the video helped! ⚡️
@pnsmexico
2 жыл бұрын
@@Movelectrics You're awesome sir! Now, having a pak by your footboard, doesn't that bother you much? i got a wire basket under my Valrla handlebar bag and will be putting one more basket to attach to the scooter seat when it's back in stock. you should do a video of how much the scooter seat helps with the balance and safety if you get one before me, haha
@Movelectrics
2 жыл бұрын
I have plenty of space with the storage bag on the deck. Some people prefer to hang from the handlebars instead ⚡️
@alexpurnell6843
Жыл бұрын
i own a yume Y10 and i havent ridden it yet. where i live it rains a lot, like Ireland, and it snows there too, so its currently in my room, and i probably wont get to ride it till early 2023
@Movelectrics
Жыл бұрын
Best practice is to silicone entry points to the battery compartment. Also Gorilla Tape is brilliant! Takes minutes. Nothing is guaranteed but absolutely worth a try.
@AVoidDances
Жыл бұрын
If you notice any looseness where the gooseneck or tail comes into the deck remove the front and rear lights. there's more bolts inside that need lock tight!!
@RickyD1968
3 жыл бұрын
Awesome video !!!
@Movelectrics
3 жыл бұрын
Glad it helped Ricky 🛴
@radioking-car-radio-carplay
3 жыл бұрын
Thanks man. I'm waiting for X Tron x10. It's kinda of same scooter. Let me know if you want to compare and have a look. Look like there is few improvement.
@Movelectrics
3 жыл бұрын
Interesting! I’ll have to have a look! 🛴
@sammyfuentes2561
2 жыл бұрын
Hi I got me one and I will like to know were I can fine the phone holder and the front bag .
@Movelectrics
2 жыл бұрын
The bag I have is Wildman Bag 3ltr. Phone holder is from AliExpress also.
@lancevskiwi123
Жыл бұрын
Nice tips
@Movelectrics
Жыл бұрын
Thank you for the watch ⚡️
@idas9158
2 жыл бұрын
Buy also: 1. Fenders extensions to protect your dampers. 2. Fenders support/stabilizers so they won’t make noises or vibrate. 3. TPMS for pressure control. 4. Crash pads. 5. Bearings from SKF or even better one from Nachi. 6. LCD protector frame.
@fpvflyer4758
3 жыл бұрын
Hello - Can you please do a video on the Varla Eagle One brake adjustment for the Hydraulic Brakes... Like how to make the brake lever more responsive by reducing the amount of travel. That would be great help. Many thanks!
@Movelectrics
3 жыл бұрын
Good suggestion! Just need bleeding they do ⚡️
@fpvflyer4758
3 жыл бұрын
@@Movelectrics Thank you kindly 🙏
@fpvflyer4758
3 жыл бұрын
@@Movelectrics Do you have a video on how to do that?
@Movelectrics
3 жыл бұрын
No not yet as I don’t need to do mine. There are videos on YT on how to do it ⚡️
@luisrome4022
2 жыл бұрын
Do you know if it's true? That you are not supposed to switch from single to dual motor while you are riding? Same with the turbo button? And if you do will it damage scooter?
@Movelectrics
2 жыл бұрын
Definitely never switch while in motion. Can blow the BMS and or controllers. Most manuals state this.
@cheleirvin4455
2 жыл бұрын
WHERE CAN I BUY THE UPGRADED RUGGED CLAMP AND THE LITIUN GRASE SPRAY?
@Movelectrics
2 жыл бұрын
Hi Chele! You can get the clamp from Aliexpress linked here a.aliexpress.com/_mrD1H4T The lithium grease spray you should be able to get in any hardware store or Amazon. Here is the video I done using the grease kzitem.info/news/bejne/mZepx518gaWViHY
@cheleirvin4455
2 жыл бұрын
Thank you for your quick response!!! Good deal.
@577buttfan
2 жыл бұрын
@@cheleirvin4455 get the grease at Walmart or auto zone.
@fpvflyer4758
3 жыл бұрын
If you do the grease bearings or disc clean ing can you please do a video.
@Movelectrics
3 жыл бұрын
Absolutely! Everything I mentioned will be in a video soon 🛴
@fpvflyer4758
3 жыл бұрын
@@Movelectrics Thank you so much! 🙏
@TimsElectric
3 жыл бұрын
Brilliant :) :) :) Top ideas...going to buy some grease for the bearings :)
@Movelectrics
3 жыл бұрын
You can definitely notice the difference. Nice and quiet ⚡️
@TimsElectric
3 жыл бұрын
@@Movelectrics I have about half a dozen scooters (reviews etc) so it makes sense to grab a bottle and look after them :)
@Movelectrics
3 жыл бұрын
I can relate man! ⚡️
@TimsElectric
3 жыл бұрын
@@Movelectrics I need to find a solution to storing them....might try some kind of shelving ...wife is threatening GBH
@jasonbarron3047
2 жыл бұрын
Hi matey, what's the price of these in the UK? I own the xiao.i pro 2 but it's not doing it for me at the moment I'm a big lad and iv come to realise this is the wrong scoot for me so I'm gunna upgrade to a variable after seeing your video so how much am I looking at paying please cheers regards jase
@Movelectrics
2 жыл бұрын
Hi Jason! Their warehouse is in Germany. So here is their website and you can use my channel name ‘ClearLearning’ for €50 off if you end up getting it bit.ly/3imc5iY
@jasonbarron3047
2 жыл бұрын
@@Movelectrics oh wow! Thankyou very much mate that is so kind really appreciated brother 👍 xj
@Movelectrics
2 жыл бұрын
No worries at all 🛴
@luisrome4022
2 жыл бұрын
When is best time to charge battery? After every ride,our when battery gets low
@Movelectrics
2 жыл бұрын
I keep mine topped up all the time as I use it almost everyday. Always wait though about 30mins to 1hr after taking it off charge before use and also after use to recharge. Never let them batteries get low, not good for them. If you plan on storing the scooter, have it at around 70%.
@luisrome4022
2 жыл бұрын
@@Movelectrics thanks. Now when connecting charger to scooter is it best to plug charger in then connect to scooter our hook up to scooter then plug in? I have herd that you should plug in charger 1st then plug in to scooter? Not sure if it matters
@Movelectrics
2 жыл бұрын
General rule is plug into the wall (brick turns on) then into the scooter. When removing, disconnect from the scooter first ⚡️
@luisrome4022
2 жыл бұрын
@@Movelectrics thanks agian.
@haroldanderson2781
3 жыл бұрын
With the rugged clamp. Why wouldn’t you rotate it 90 degrees so you get full contact with front to back since that is where most of the stress is?
@Movelectrics
3 жыл бұрын
Hi Harold! I saw a few people doing that alright. I’m gonna wait and see how things get in with the current direction. So far no issues 🛴
@robertmwangi1493
3 жыл бұрын
@@Movelectrics rugged clamp is larger, on my 10x i feel it holds the stem real good in to place
@Movelectrics
3 жыл бұрын
@@robertmwangi1493 it definitely feels firmer for sure! Thanks for sharing ⚡️
@fpvflyer4758
3 жыл бұрын
Hello.... I just tried P-11 setting 3, 4, and 5 for regenerative braking and it is not working at all. Level 3 was working and then just stopped working. Any idea how to fix this? I am not the least bit impressed by Varla, or their lack of customer service. I feel scammed out of my hard earned money to be honest. Their customer service is garbage.
@Movelectrics
3 жыл бұрын
Hi! Join the ‘Varla Electric Scooter’ FB group. Post a video of the scooter raised and on level 5. We can have a look better that way. I don’t work for Varla by the way, im just suggestion a few things to help ⚡️
@fpvflyer4758
3 жыл бұрын
@@Movelectrics Thank you my friend. I just joined this evening and posted the question. Haven't had time to add a video. Though, my explanation on the FB post was very clear. Really appreciate your recommendation and trying to help 🙏
@fpvflyer4758
3 жыл бұрын
Hello - Would you happen to know the handle bar size (thickness)? I want to buy handle bar extenders to add accessories, but there seems to be multiple sizes available. Many thanks!
@Movelectrics
3 жыл бұрын
Hi! Let me double check ⚡️
@Movelectrics
3 жыл бұрын
They are 27inches wide. Diameter varies because they are curved in the middle. People have upgrade to longer handlebars. Join the VARLA FB group to see the upgrades bit.ly/3xC2RTM
@fpvflyer4758
3 жыл бұрын
@@Movelectrics Thank you for your assistance. I'm one of the few that doesn't have Facebook, otherwise I would have joined. Do you have handle bar extensions? Just wondering what size would work. Thanks again!
@Movelectrics
3 жыл бұрын
No problem! I don’t have extensions myself. Try Aliexpress perhaps ⚡️
@8701michael
3 жыл бұрын
@@Movelectrics What is the diameter of the handlebar where it clamps to the stem.
@nickychops6729
3 жыл бұрын
Is handlebar height adjustable?
@Movelectrics
3 жыл бұрын
Hi Nicky! No, it’s just one height. I’m 5’9 and is perfect for me ⚡️
@RickyD1968
3 жыл бұрын
Hi how long did take you to get your scooter after you purchased it ? I purchased one on 8/16/21 and on 8/31/21 a fedex label has been created but not shipped and its 9/2/21 and varla keeps giving me stupid excuses. Is anybody else having this problem ???
@Movelectrics
3 жыл бұрын
Hi! Ricky! This scooter is in very high demand so be patient. I live in the EU so it’s different. Took 4 weeks. Join the Varla FB group, it’s very helpful! bit.ly/3xC2RTM
@RickyD1968
3 жыл бұрын
I finally recieved my eagle one on Thursday and WOW I Am used to my ninebot max scooter but this is a whole different animal. When I set the setting to full speed you better hang on because the scooter wants to go now. The brakes are awesome you can stop on a dime The suspension and ride of the scooter is just Awesome !!!!!!
Пікірлер: 84