FYI When using wire nuts best not to pretwist. Get better grip if they are not pretwisted when you put on the wire nuts. Nice clean informative video. Like it lot. Wifey has us changing out all the lights in our RV.
@RyanMegan
3 жыл бұрын
Thanks for the tip!
@ryanpetrill3126
3 жыл бұрын
Your videos are so helpful and informative. Have helped me many times over with our reno
@RyanMegan
3 жыл бұрын
Thank you! Glad we could help! :)
@Yenko1992
3 жыл бұрын
Geeze had no idea it was as simple as a bulb change!!!
@RyanMegan
3 жыл бұрын
I know right!
@IanHoyt
4 жыл бұрын
Thanks for the help! First diy video that talks about the actual wires!
@RyanMegan
4 жыл бұрын
Glad it helped!
@dawnbuteau6140
Жыл бұрын
Why didn’t you use the wire connectors that came with the light? Is electrical tape safer?
@L.Samples
2 жыл бұрын
Thanks man Just got a 42 foot Montana and we are doing the same thing I just don’t know where to start? We’re also painting 😳🤪do I need to put kills on first or do I have to sand off all the laqour stuff??
@L.Samples
2 жыл бұрын
Ps. We’re 4 season’s now and just wondering about painting is it going to be to much or is it fairly easy?? Just so many unanswered??.s
@nickbrozek7888
2 жыл бұрын
How do you wire something that had 3 wires in the light fixture
@meowzic
3 жыл бұрын
Can you use a 120v dimmer switch in place of a 12v one? 12v dimmer switches are stupidly expensive and ugly.
@RyanMegan
3 жыл бұрын
That's a very good question! I honestly have not messed with dimmer switches, so I'm not sure if that would work or not! Sorry!
@videoPROJEkts
4 жыл бұрын
i bought the same fixture mine had 3 wires. at about the 3:15 mark i see that the yellow wire is just hanging out there. did you remove that wire? did you have any issues with the removal of that wire?
@RyanMegan
4 жыл бұрын
Our fixture came with two wires already pre-installed with the option of a third yellow wire which is meant to be a "ground" wire. We did not use the ground wire. If you want to use the ground wire, you would need to "ground" it to a screw on the base of your light fixture. Hopefully the directions for the light would be more specific for you.
@brittanyvela1336
4 жыл бұрын
Do any 12 volt lights work? Like 18, 20 or 7 watt?
@RyanMegan
4 жыл бұрын
Any light fixture will work, but the bulb needs to be a 12 volt bulb to be able to be powered by your batteries (DC system). I have links to the 12 volt bulbs we use in the video description so check those out! Hopefully that answers your question! If not, let us know! :)
Пікірлер: 20