I had a '67 Nova 4-door with a straight 6 & powerglide. Flat black with red interior, not the most desired collector's car but I loved cruising around in it. Always wanted to build the 6 up with a turbo & put a proper 5-speed in it with modern suspension for something fun & different.
@alpeters4857
Жыл бұрын
I had a 74 CJ5 with a 258ci straight six when I was a young lad. I rebuilt the engine, put a high torque or off road cam in it, a Cliiford research 6=8 intake with a 500cfm 4 barrell holley carb, and split manifold headers. That motor ran so well on and off road, and would out perform the Jeeps with 304 V8''s!
@mynameisnotcory
2 жыл бұрын
My dad swapped this beast outif his 67 nova in highschool for a small block v8 and he still has it in the garage, 8000 miles on it…thinking of doing a build for 24h Lemons with it next year! Still sings like new!
@Rlip
Жыл бұрын
Wow must be worth great money
@Johnleefromthemist
4 жыл бұрын
Nice set up and the I6 as well great job
@jameslahee9874
2 жыл бұрын
I had a LS 250 6 Chevy and amazingly actuall miles 300 thousand miles # 5 cylinder piston went out changed the rod and piston and she still runs 1968 motor hard to believe bute very true
@sevenhornets
4 жыл бұрын
Mine never sounded that good. But it was the 80's.. Lol.. I loved my 292...
@scottiesgarage3690
4 жыл бұрын
I loved the 80’s!!!
@DeanMk1
3 жыл бұрын
Cherry Bomb, or similar type muffler....guaranteed to make any inline 6 sound like a badass....even better with truck ex. manifold or headers and big tube exhaust pipe.
@raymondholley8646
2 жыл бұрын
Looks good sounds good that sounds completely stock all about 105 horsepower
@randybaca6132
Жыл бұрын
I have a 292 Chevy inline 6 in my street hot rod it's a 1927 with 29 fiberglass fenders chopped hard only 6 in window but I love the 292 it's plenty of power it's hooked to a 350 turbo and I really enjoy this car and the motor that's in it thank you for this video it's good to see that people are investing in these inline-6 is Witcher very good Motors
@Mr.Safety.
2 жыл бұрын
Is it me or are straight 6 motors getting cooler and cooler..
@robertlee6783
3 жыл бұрын
I have one in a 1978 c30 straight piped with stacks sounds good
@novanut1964
2 жыл бұрын
sounds and looks good, thanks
@edupunkhead3035
3 жыл бұрын
Esse é um dos queridinhos do Brasil, amo esse motor pela extrema durabilidade dele ótimo pro dia a dia !
@hudson8591
2 жыл бұрын
Só que esse é um 292 4.8 aqui no Brasil saiu só nos caminhões.. o queridão aqui é o 250 4.1 dos opalas
@emersonlopes3441
Жыл бұрын
Top, canavieiro!!
@emersonlopes3441
Жыл бұрын
Que carburador é esse??
@charlesparr3296
2 жыл бұрын
That's music right there!!!!!
@Quint1836
3 жыл бұрын
I'd take a Ford 300 any day. But man, that's a sweet set up
@superkas
2 жыл бұрын
Hell yeah brother
@rockofagesusa7942
3 жыл бұрын
That’s something ya don’t see everyday
@tomelmore8431
2 жыл бұрын
Way cool!
@HighPowerOptionsTrades
Жыл бұрын
🔥🔥🔥🔥🔥🔥🔥🔥🔥
@smokeydabeecharlescoleman8365
2 жыл бұрын
Would love that in my k-10,lol
@msloquet
4 жыл бұрын
What exactly did you do on this build. It sounds great.
@patrickholt4140
Жыл бұрын
Eye and ear candy
@BobbyOfEarth
2 жыл бұрын
The scoop is a nice touch, must be worth another 8 hp...
@merkclan_1880
Жыл бұрын
type r tach XD, love it
@austincarlson3266
3 жыл бұрын
What kind of engine mounts did you use to bolt up to this stand? I just got this stand and I’m kind of stumped on what to use. I’m thinking it’s gonna have to be custom. Any advice ?
@scottiesgarage3690
3 жыл бұрын
I used the original engine mounts and fabricated adapters.
@YellowMustard
3 жыл бұрын
There is nothing finer than these old straight 6's
@VinnyMartello
3 жыл бұрын
Is that a Tom Lowe cam you got in there?
@elgatoloco1548
3 жыл бұрын
Beautiful build. I wonder if these headers will fit good on a 63 c10? Do the headers hang super low below the oil pan on your setup?
@scottiesgarage3690
3 жыл бұрын
These were made for a c10 63-79. Should fit fine.
@elgatoloco1548
3 жыл бұрын
Did you have to grind or ding anything to make the intake manifold fit or the headers to clear anything in the truck? Im having a hard time fitting these in my 63 c10 292 4 speed
@zackpowerusa
2 жыл бұрын
@@elgatoloco1548 I had to ding mine on the 2nd tube to clear my Clifford intake, along with grinding on the outside of the 2nd flange to clear make room for clifford flange. They dont hang too low on my 64 c20
@alejandroarambula7665
2 жыл бұрын
Kind’ve sounds like a cummins
@moosehand8721
11 ай бұрын
Be sweet in a little shoebox 71 nova.
@filmart430
2 жыл бұрын
This engine looks like a beefed up zombie holding its head in his arm.
@johncooper9976
3 жыл бұрын
I like the black alternator and pulleys, where did you get them?
@scottiesgarage3690
3 жыл бұрын
The alternator was also powder coated.
@74nova36
3 жыл бұрын
@@scottiesgarage3690 sexy motor front right there.
@jonesfamily2494
2 жыл бұрын
What did engine go in its badass
@mschiffel1
4 жыл бұрын
Nice sounding engine...How about a few revs?
@scottiesgarage3690
4 жыл бұрын
Thank you! There’s one other video of it on my page where I rev it a couple of times. I’ll make another when the weather gets a little better. Hopefully I can find something to put it in this spring.
@DigitalBenny
4 жыл бұрын
@@scottiesgarage3690 I've got an Astro van you can put it in...🤔😏
@austincarlson3266
3 жыл бұрын
I know you probably sold it his buy now, but I’m building a 292 and bought the same engine stand. Problem I am having is that I can’t find a starter that bolts up to the block. any help on what model and brand yours was?
@scottiesgarage3690
3 жыл бұрын
I think mine was from a small block Pontiac. Bolt holes are straight across instead of diagonal like a sbc.
@romeo.juliet.whiskey
10 ай бұрын
How did you go about painting?
@budsodalsky
Ай бұрын
do a burnout!
@tinocontrevas716
3 жыл бұрын
2in tube and 3/4 in glass packs end them right b4 the rear driver tire .😉
@brofessormex
Жыл бұрын
So it's a pretty good engine? I've got one in my garage
@alfrejaime
4 жыл бұрын
what’s size bore after machine shop.? block and head? or complete?
@scottiesgarage3690
4 жыл бұрын
Believe it or not but this is a very low mile motor out of a 1970 Chevy dump truck. I was planning on a rebuild until I opened it up. It looked brand new inside so I decided to chance it. The motor had been in storage for decades. I just did an overhaul on it and glad I did. I love this thing.
@ShaneShepherd
4 жыл бұрын
@@scottiesgarage3690 so... Is it stock? You stated it was for sale - but, there are no details: rods, pistons, rockers, ported, bored? I'm have a 292 I want to put a Clifford kit in with a 12 bolt intake for a future turbo addition... If this fit the bill I might consider buying it /selling mine. But, I wouldn't need that intake setup or the exhaust. Guess, I could sell that as well.
@scottiesgarage3690
4 жыл бұрын
All the internals are stock.
@johngoble1558
4 жыл бұрын
How much?
@74nova36
3 жыл бұрын
@@scottiesgarage3690 how’d that motor turn out. I’ve got a 250 in a 74 Nova I’m thinking about keeping. Took the valve cover off and it looks great inside. Just gonna send it
@jturner2660
2 жыл бұрын
What kind of intake manifold are you using and what kind of headers
@scottiesgarage3690
2 жыл бұрын
Offenhauser intake and flowtech headers
@phyde1885
Жыл бұрын
@@scottiesgarage3690 I took that exact motor,same truck,63 c30 4 speed Granny and all,and re-built into a 73 Dodge,Yes DODGE B300 Tradesman motor home. Purr's like a Kitty !! DAM hell of alot easier to work on,here to tell you ! I Need your Air Systems to make any more HP. Got a 2brl carter on it now,it wants MORE ! I can keep up with the semis,that's good enough,but DAM can that thing pull in LOWER gears !😎
@msloquet
Жыл бұрын
What size edelbrock carb and do you have any info on the linkage for it? Thanks
@scottiesgarage3690
Жыл бұрын
It’s a 600 cfm. And unfortunately I sold it before I put it in anything, so I never got around to the linkage.
@rack0146
2 жыл бұрын
Where can I find those garden hose-to-radiator hose connectors?
@scottiesgarage3690
2 жыл бұрын
They came with the Larin start stand
@jorgeurquidi8128
3 жыл бұрын
mine dont sound that nice 👍
@flisol
4 жыл бұрын
Hello, where can I get the spare parts for this engine, gasket, carburetor, distributor, among others?
Пікірлер: 74