How to scan ๐๐ข๐ ๐๐จ๐ฆ๐๐๐ญ ๐๐ ๐๐.๐ยฐ๐๐๐ฌ๐ญ on Qsat Decoder
To scan NigComSat 1R at 42.5ยฐ East on a Qsat decoder, follow these steps:
Step-by-Step Guide
1. *Connect Your Qsat Decoder:*
- Ensure your Qsat decoder is properly connected to your TV and satellite dish.
2. *Power On:*
- Turn on your TV and the Qsat decoder.
3. *Access Satellite Menu:*
- Using the Qsat remote control, press the "Menu" button.
- Navigate to the "Installation" or "Setup" menu (the exact name may vary depending on your Qsat model).
4. *Select or Add Satellite:*
- Go to the "Satellite List" or "Satellite Setup" option.
- If NigComSat 1R is listed, select it. If not, you will need to add it manually:
- *NigComSat 1R*
- Orbital Position: 42.5ยฐ East
- LNB Frequency: 5150 MHz (C-band) or 9750/10600 MHz (Ku-band, if applicable)
- Transponders: Add the transponder frequencies manually if required.
5. *Configure LNB Settings:*
- Ensure that the LNB settings match the specifications of your satellite dish's LNB. For C-band, the LNB frequency is typically 5150 MHz. For Ku-band, it is 9750/10600 MHz (Universal LNB).
6. *Add Transponder Frequencies:*
- Navigate to the "Transponder List" or "TP List" under the NigComSat 1R satellite settings.
- Add the transponder frequencies. Here are some example transponder settings for NigComSat 1R:
- Frequency: 12518 MHz
- Symbol Rate: 29500 KS/s
- Polarization: Horizontal
- (Add other transponders as necessary)
7. *Perform Blind Scan:*
- After configuring the transponders, go to the "Blind Scan" or "Auto Scan" option in the installation menu.
- Select NigComSat 1R and start the scan. This will allow the decoder to automatically search for all available channels on the selected satellite.
8. *Wait for Scan to Complete:*
- The scanning process might take several minutes. The decoder will find and store all available TV and radio channels.
9. *Save Channels:*
- Once the scan is complete, save the channels. You should see a list of available channels from NigComSat 1R.
10. *Exit Menu:*
- Exit the menu and start watching the channels.
Additional Tips
- *Signal Quality:* Ensure your satellite dish is correctly aligned with NigComSat 1R and there are no obstructions blocking the signal.
- *Software Update:* Make sure your Qsat decoder firmware is up to date. Updates can improve satellite scanning and channel reception.
- *Manual Scan:* If the automatic scan does not find all channels, perform a manual scan by entering specific transponder frequencies and symbol rates.
Example Transponder Frequencies for NigComSat 1R (42.5ยฐE)
Here are some example transponder frequencies you can use for manual scanning:
- *C-Band:*
- Frequency: 3652 MHz, Symbol Rate: 30000, Polarization: Horizontal
- Frequency: 3656 MHz, Symbol Rate: 10830, Polarization: Horizontal
- *Ku-Band:*
- Frequency: 12518 MHz, Symbol Rate: 29500, Polarization: Horizontal
- Frequency: 12520 MHz, Symbol Rate: 30000, Polarization: Vertical
Make sure to verify the latest transponder information, as these can change over time. You can find updated transponder lists from satellite information websites or forums.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
ะะตะณัะทะณั ะฑะตั ๐ ๐๐ข๐ ๐๐จ๐ฆ๐๐๐ญ ๐๐ ๐๐.๐ยฐ๐๐๐ฌ๐ญ | Full Scan | Ku Band | Channel List | Qsat Decoder | Pbteck
No video
ะัะบััะปะตั: 2