Just got my first boat ever sitting in the garage. This video is my next step...
@1Cast1Fish
Жыл бұрын
Awesome to hear congrats on the boat...looking forward to hear some fish stories :)
@vmoua74
2 ай бұрын
Thanks for the video. Makes the job much easier.
@1Cast1Fish
2 ай бұрын
Glad to help
@TAaron-fq5vf
3 ай бұрын
Yeah, it’s kind of simple but people like me like videos even if it appears to be simple thank you so much for doing it
@1Cast1Fish
3 ай бұрын
Glad it was easy to understand and follow...that is why I love making these videos to help others
@AOKUrbanHomestead1
Жыл бұрын
You made that look easy. Now if I could just know how to read a fish finder. Lol
@1Cast1Fish
Жыл бұрын
Learning to read, interpret, and use what the fishfinder is showing you is the main goal...takes time on the water and practice...any questions feel free to ask. :)
@Marioguajardo3167
Жыл бұрын
Can’t wait to see it running.👍👍👍👍
@1Cast1Fish
Жыл бұрын
You and me both!
@dimityrdolnoorqhov699
6 ай бұрын
Super video 👍
@1Cast1Fish
6 ай бұрын
Thank you 👍
@3DOutdoors
Жыл бұрын
Well done.
@1Cast1Fish
Жыл бұрын
Thank you
@marks0503
Жыл бұрын
Clean install. Doing the same now. When I cut the HDPE it doesn’t sand out black. How did you sand the cuts to make the look natural/black?
@1Cast1Fish
Жыл бұрын
What color is it showing when you sand it? I used a heavy grit paper and just very lightly went over it. If I used a fine grit and really worked on it... it would get shiny, but no color change.
@joee681
19 күн бұрын
The little wires that You said were for networking, I’m trying to have a setup where I can move my unit from the front to another mount around the steering wheel so I can go from live scope to side view and see my mapping while driving, you have a video or a suggestion on this ? Thanks 👍
@1Cast1Fish
15 күн бұрын
You want 2 stations that you can swap the unit between? You will need an additional cradle and mount along with power wire. You will also need a compatible transducer and cable mounted to the cradle as well. This will let you do your LS from the front....pull the unit and have SV & Maps on the console.
@joee681
15 күн бұрын
Excellent , Thanks 👍👍
@brandonearly2963
5 ай бұрын
Does your Garmin need a ground wire? Mine does and I need to figure out where to ground too
@1Cast1Fish
5 ай бұрын
So they have a hook up on back for an additional ground wire, but I have never used it and don't know first hand of anyone using it. I have heard of people using it to fight major interference issues, but I am not to familiar with it.
@PONCE103
2 ай бұрын
Hey Paul, how you doing? Did you try to put a video? How can you change a pump force motor 85 hp 1988 out board
@1Cast1Fish
2 ай бұрын
I do not have any videos showing this unfortunately, sorry I could not help, but hope you are doing well and can find what you are looking for.
@johnstuble7660
4 ай бұрын
Which port to you connect the transducer to behind unit
@1Cast1Fish
3 ай бұрын
The transducer port will indicate transducer on the back, plus it is notched to only fit in the correct spot as well.
@strikegoldshave
Жыл бұрын
Please do a video on reading the a scope
@1Cast1Fish
Жыл бұрын
Will do...great idea
@strikegoldshave
Жыл бұрын
@@1Cast1Fish ty on the garmin would be great
@Set_That_Hook
Жыл бұрын
Can i hook up the power and ground under the dash or do i have to run it to the battery?
@1Cast1Fish
11 ай бұрын
My old units were hooked up under the dash on the buss bars without issue. I just went this route for due to overall power draw from my system. Just ensure you have the fuse inline and it will be good to go.
@Set_That_Hook
11 ай бұрын
Thanks I appreciate you responding @@1Cast1Fish
@1Cast1Fish
11 ай бұрын
@Set_That_Hook anytime
@ronaldphillips8750
6 ай бұрын
Would you comment on installing the 54 transducer on trolling motor as fo.r as interferance
@1Cast1Fish
6 ай бұрын
I have a Garmin Force, so the GT 54 was already on the trolling motor when I installed it. Now from past experience, I can tell you a few things that got rid of interference...and I had a ton with my humminbirds. 1. Keep the power wires as separate as possible, they hated being run next to the trolling motor cables especially Minnkota with the power modulation. 2. Run a separate dedicated power source, or at least a dedicated fuse block or buss bar to keep things separated. 3. Make sure your wires are sized right Hope this helps some
@ronaldphillips8750
6 ай бұрын
Thanks very much for the good advise.@@1Cast1Fish
@1Cast1Fish
6 ай бұрын
Hope this helps...good luck
@JB-ct8kf
Жыл бұрын
Which battery did you wire the unit too? Cranking or the other 2
@1Cast1Fish
Жыл бұрын
So I have 4 total batteries, 1 Cranking, 2 Trolling, and 1 Dedicated Electronics Battery. I use the electronics battery for power.
@OlredRN
Жыл бұрын
Where can you find bow plates that fit your garmin ?
@1Cast1Fish
Жыл бұрын
Depends on boat, some places out there make special plates for high end bass boats, but in my case I used HPDE board and cut my own to size since there was no aftermarket options available.
@OlredRN
Жыл бұрын
@@1Cast1Fish that’s what I ended up doing but with the metal plate that came factory on my AVX 1980. Do you know what fuse this unit would use ?
@1Cast1Fish
Жыл бұрын
@@OlredRN so the 106 Ultra has a factory online that is 8A
@stillinyaisstillinur3300
Жыл бұрын
Fishing wire to go fishing
@1Cast1Fish
Жыл бұрын
I am glad to finally be done with the boat projects and working crazy hours...great to get backout and fish again
Пікірлер: 44