This presentation is based on a real world customer story regarding the cloning of a severly damaged ECU from an ACURA TL. The purpose is to show step-by-step the procedure to locate the eeprom part, connect to the part using the AccuTouch Probe, read the data from the damaged ECU and then program that data into an ECU from a salvage vehicle.
Here is what we cover:
1. How to start the system software and choose the eeprom memory part number
2. How to locate PIN 1 on the eeprom
3. How to use the AccuTouch Probe to connect to the defective module eeprom
4. How to read the data from the defective assembly and confirm it is valid
7. How to move the AccuTouch Probe to the used or salvage module
8. How to confirm that you are indeed connected to the eeprom before programming
8. How to program the original eeprom data into the salvage module and confirm success
9. How to remove the AccuTouch Probe and reassemble the ECU
Summary: In this presentation we show you how to locate the eeprom in the ECU from a wrecked ACCURA TL. You will then see how to attach the AccuTouch Probe to the part and read the data. Once the data has been read we show how to move the AccuTouch Probe to the salvage ECU, confirm a good connection, then program the original ECU data into the replacement. Module reassembly is then shown.
Automotive Kit information is here: www.arlabs.com...
Негізгі бет How to clone an ACURA TL ECU - A real world customer story where EEPROM WORK was successfully used
Пікірлер: 7