The video covers all the necessary steps to change your front right brake rotor and pads on a 2002 Ford Taurus. Also, here is the link for the video that shows the procedure for the left front. • How to Replace the Lef... Essentially, the steps are nearly identical for either side. Below, I have included time stamps to help you find a particular moment in the repair. Thank you for watching.
1. From 00:00 to 00:14 is the brief introduction.
2. From 00:15 to 01:11, the car's right front is lifted off the garage floor, and a jack stand is slid under the front engine cradle.
3. From 01:12 to 01:55, the right front wheel and tire are removed.
4. From 01:56 to 02:47, the brake caliper and brake pads are removed.
5. From 02:48 to 03:13, the brake caliper is secured with a wire to the coil spring so it does not stress the brake flex hose.
6. From 03:14 to 04:25, the brake caliper is removed.
7. From 04:26 to 05:08, the brake rotor is removed.
8. From 05:09 to 06:51, the new brake rotor is unboxed and wiped clean of the shipping oil.
9. From 06:52 to 07:34, the new brake rotor is installed, and the new brake pads are shown.
10. From 07:35 to 09:47, the brake caliper slide pins are checked for smooth operation, and rust is sanded off the brake caliper bracket where the brake pads will rest.
11. From 09:48 to 10:44, the brake caliper bracket is installed.
12. From 10:45 to 11:35, the brake pads are installed.
13. From 11:36 to 13:14, the brake caliper piston is compressed.
14. From 13:15 to 14:16, the brake caliper is installed.
15. From 14:17 to 15:05, the tire and wheel are installed.
16. From 15:06 to 15:36, the jack stand and jack are removed.
17. From 15:37 to 16:00, the lugnuts are torqued to 100-foot pounds.
18. From 16:01 to 16:29, the brake pedal is pumped until the caliper piston pushes against the brake pads.
Негізгі бет Автокөліктер мен көлік құралдары How to Replace the Right Front Brake Rotor and Pads on a 2002 Ford Taurus: All Steps Shown in 4k
Пікірлер