How To Scan 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East | French Channels | Master Decoder
To scan for French channels on Eutelsat 16A (16° East) using a Master Decoder, follow these detailed steps. Ensure you have a satellite dish properly aligned to Eutelsat 16A. Here's a step-by-step guide:
Step-by-Step Guide
1. **Connect the Satellite Dish**: Ensure your satellite dish is correctly aligned to Eutelsat 16A at 16° East and connected to the LNB input on your Master Decoder.
2. **Power On the Devices**: Turn on both your TV and Master Decoder.
3. **Access the Menu**: Using the remote control, press the "Menu" button to access the main menu.
4. **Navigate to Installation or Setup**:
- Look for an option labeled "Installation," "Setup," "Antenna Setup," or similar.
5. **Select Satellite Configuration**:
- Choose "Satellite Setup," "Satellite Configuration," or "Satellite Installation."
- Select "Eutelsat 16A (16°E)" from the list of satellites. If it's not listed, you may need to add it manually using the satellite's position details (16.0° East).
6. **Set LNB Type and Frequency**:
- Ensure the LNB type is set correctly (usually Universal for most setups).
- Check and input the correct LNB frequency (e.g., 9750/10600 MHz for Universal LNB).
7. **Transponder List**:
- Access the transponder list to ensure you have the correct transponders for French channels.
- You may need to manually input transponder frequencies if they are not pre-listed. For example:
- Frequency: 12545 MHz
- Polarization: Horizontal (H)
- Symbol Rate: 30000 kS/s
- FEC: 3/4
8. **Scan Channels**:
- Choose "Blind Scan" or "Automatic Scan" to allow the decoder to find all available channels on Eutelsat 16A.
- If you prefer to scan specific transponders, use "Manual Scan" and input the frequency, symbol rate, and other parameters.
9. **Start the Scan**:
- Initiate the scan and wait for the decoder to search and list available channels.
- This process can take several minutes. Ensure not to interrupt the scanning process.
10. **Save Channels**:
- Once the scan is complete, the decoder should save the found channels automatically.
- If prompted, confirm and save the channel list.
11. **Verify Channels**:
- Navigate through the saved channels to ensure the French channels are correctly listed and accessible.
Additional Tips
- **Firmware Updates**: Ensure your Master Decoder firmware is up-to-date to avoid any issues with channel scanning and compatibility.
- **Signal Quality**: Make sure the dish alignment provides optimal signal strength and quality for Eutelsat 16A.
- **Manual Configuration**: If the automatic scan does not yield results, you might need to manually add and scan specific transponders known to carry French channels.
Example Transponders for Eutelsat 16A (16° East)
Here are some transponders you might use for manual scanning to find French channels:
- *Frequency:* 12543 MHz
- *Polarization:* Horizontal (H)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
- *Frequency:* 12603 MHz
- *Polarization:* Horizontal (H)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
- *Frequency:* 12647 MHz
- *Polarization:* Vertical (V)
- *Symbol Rate:* 30000 kS/s
- *FEC:* 3/4
For the most accurate and up-to-date transponder information, you might want to consult the Eutelsat website or a reliable satellite frequency database.
Following these steps should help you successfully scan and access French channels on Eutelsat 16A using your Master Decoder.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
Негізгі бет 💎 How To Scan 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟏𝟔𝐀 16°East | French Channels | Master Decoder | Pbteck
No video
Пікірлер: 3