I have the same tumbler press and love it. Less spending or no spending extra on shrink wrap.
@RainorShine1
2 жыл бұрын
No matter what I do I still get ghosting. Shrink wrap tape around the cup ect. Still ghosting ugh. Will this press help with that?
@sherrywatson7347
3 жыл бұрын
Am I the only one who finds the settings panel complicated and confusing? Also, the fact that there’s no beep or indicating sound that the time has elapsed sends warning bells (ironic, huh?) that over processing is going to happen. I’m not sure what that would do to your project but it doesn’t fill me with confidence that I would be successful 🥺. I’m also concerned that a manual adjustment is necessary for different sized mugs or tumblers. I’m thinking this press is much too complex for me (a very occasional crafter) therefore, I think I’ll stick with the Cricut mug press. Thank you for the demo of the tumbler press. It was very informative and you saved me some money. Again, thank you.
@AngieHolden
3 жыл бұрын
Definitely all things to consider! Which is why I mentioned each of them!
@virginiarector4376
2 жыл бұрын
@@AngieHolden And everything that you mentioned was much appreciated, especially for the reasons that the other person mentioned. Everyone is def different and what is complicated for some, might not be for others. I did not see any of if being complexed, but I def would want an alarm when it is done, because as a mom, we can get busy or distracted very easily :). Thank you for a wonderful description.
@MrsMonzel
2 жыл бұрын
I just got mine today and it worked great however the settings are a bit confusing but I'm just as happy 😁. I been watching your videos nonstop and enjoy every one!
@AngieHolden
2 жыл бұрын
Great to hear!
@SLRoth
2 жыл бұрын
How has yours held up after 3 months of use? Thinking of getting one, but the reviews on Amazon aren't that great for it.
@Luxinda
3 жыл бұрын
I recently got a tumbler press and love it so far! But I’m still watching every video I can find, and really appreciate yours!! Very clear and helpful - thanks!
@AngieHolden
3 жыл бұрын
Awesome! Thank you!
@deborahknapp5524
11 ай бұрын
What kind did you get?
@Luxinda
11 ай бұрын
@@deborahknapp5524 great question - I can’t answer because I’ve actually forgotten. I went back and looked at some videos I made about it, and I wouldn’t even list the company name because their customer service was awful. However, I did end up getting a much smaller one recently that I really like, it’s called a Hitprex.
@kimberleymorse5
2 жыл бұрын
I just purchased this tumbler press. I have one I purchased in China and it came with 0 directions, and can not get it to work. 🙏 This one will work for me too. I will let you know how it goes.❤️ Thank you so much for your videos I believe I will soon be able to do successfully because of your guidance.
@AngieHolden
2 жыл бұрын
Sorry to hear that!
@jmoss55ish
2 жыл бұрын
Hi Angie, I was given this press today as a GIFT!!!
@AngieHolden
2 жыл бұрын
So lucky!!
@abbiebabie77
8 ай бұрын
Thank you for your video, I have a different press than the ones in the video but this really helped me out. I did realize I didn't have any parchment paper & had to use copy paper but my first cup came out great!
@AngieHolden
7 ай бұрын
Glad it was helpful!
@Junebug3519
2 жыл бұрын
I purchased a variation of this tumbler press in April and I absolutely love it! Ir is super easy to set and it does a fantastic job of sublimating. Now if it would just anticipate user errors before the occur! Thank you for all your awesome videos.
@AngieHolden
2 жыл бұрын
I totally agree!
@HollyMiller1958
2 жыл бұрын
After spending a collective 20 something hours searching for a 30 oz mug press you have FINALLY sealed my decision!!! TY for the great tutorial and supply list. hopefully I will be as successful as you were :)
@CheBesDesignBox
2 жыл бұрын
Love your videos. Very thorough and love the technical details you provide. I just purchased a similar mug press from Heat Press Nation. It comes with different attachments for various size mugs and tumblers. There is even an attachment for a shot glass.
@candigirrl003
2 жыл бұрын
A shot glass u say, oh I'm getting one then.🥰🤑
@LorraineCastellon-Rowe
3 жыл бұрын
Great tutorial. Seems like the press is pretty awesome. Great choice of you don't want a convection oven. Thank you very much Angie!! 💐🌸🏵🌼🌺💖💐🌸🏵🌼🌺💖
@Lobesanft
2 жыл бұрын
I´ve been looking for that or a similar tumbler press here in Germany but unfortunately it´s impossible to get one with (at least within the EU) about the size of the described one on the video. Therefore I ordered as an alternativ machine the VEVOR 6800 from GB (which isn´t EU either) with is completely closed and can sublimate tumblers up to 28 cm (11") height and almost 10 cm in diameter (almost 4 inch). The only disadvantage I realized so far is the fact that You cannot sublimate any cans oder tumblers or mugs with any plastic parts attached, ´cause it goes completely into the machine with all parts heated up to the desired temperature.
@mikeandkitgrabowski1542
Жыл бұрын
Would LOVE to see a video how to do the Stanley dupes
@AngieHolden
Жыл бұрын
I have been working on them so stay tuned!
@bigrndahouse
2 жыл бұрын
And do not put a single mug in the middle. It will not get enough pressure to sublimate correctly. If anything have a spare mug and put it on the other side if you have just one mug. This worked for me.
@AngieHolden
2 жыл бұрын
Oh good tip! Thanks! I have only ever used it for two!
@bigrndahouse
2 жыл бұрын
@@AngieHolden Thank you for your in-depth videos! Very much appreciated.
@INTLEVA
3 жыл бұрын
Thank you as always! Was just looking for a 20oz and 30oz tumbler press
@AngieHolden
3 жыл бұрын
Perfect!
@billladson2511
2 жыл бұрын
I love you showcasing this. I love my PYD Life tumbler press for 2up mugs and the tumblers!
@librarymarna
2 жыл бұрын
Finally got my hands on the PYD Life tumbler Press from your link. They had 2 versions so I chose the V3 which is the updated version of the one you showcased in this video. I couldn't be happier and it printer a sublimation mug perfectly the first time out following all of your directions. Now onto tumblers. Thank you so much for this video and for encouraging us to try this. I had already sent another brand back to the supplier as I had wasted so many blanks so I am a very happy PYD Life customer!!
@AngieHolden
2 жыл бұрын
Yay! Happy to help!
@lauracooper4877
2 жыл бұрын
I have that same press but have had a terrible time with my edges! the middle presses great but the edges come out uneven. did you have this issue?
@librarymarna
2 жыл бұрын
@@lauracooper4877 I have not had any heating issues with 2 mugs at a time or my tumblers. I do make a half turn after pressing and then press again with the tumblers just like Angie did on her video. They all come put perfectly. Sorry you are having issues. Very frustrating as I had to return another tumbler press from another company because of this kind of issue.
@lisayoung3737
2 жыл бұрын
@@lauracooper4877 Yes me too !!! Can't afford too ruin any more tumblers. Have you figured it out yet ? Thank You
@lauracooper4877
2 жыл бұрын
@@lisayoung3737 not yet unfortunately, but I also haven't had time to really play with it. I'm really only having issues with the 30 Oz, which are longer. Recently i read in the pyd life manual that due to how the heating element is inside, the last 1/2 inch or so on left and right (can't remember the exact measurement) doesn't get as hot, so I figure I probably need to do more rotations and press each end longer. Hope that makes sense!
@bezdek3505
2 жыл бұрын
Angie thank you so much for the review.
@cindymartinez1335
Жыл бұрын
Can you do a tutorial on how to mirror and resizing the prints to fit different items?TIA
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@tracyishealing911
Жыл бұрын
Is it correct to say that if you want to sublimate on tapered or rounded drinkware you must use an oven?
@AngieHolden
Жыл бұрын
There are some tumbler presses that come with coils for tapered items but they would be very specific. I find it easier to just do that type of thing in my oven and not try to buy more accessories for the press.
@knowyourworld-kyw8140
2 жыл бұрын
Supperbb 👏 i have been watching your videos for quite some time and I am taken away by your efforts. Thanks a lot dear
@AngieHolden
2 жыл бұрын
It's my pleasure!
@will_graham
Жыл бұрын
This was amazing and very comprehebsive youre awesome angie tha k you
@Truecrimequeen68
3 жыл бұрын
You would think you shouldn't have to rotate it. Great job 👏
@jenselle2933
3 жыл бұрын
I was thinking the same thing.
@tiffaneywilson7032
2 жыл бұрын
I just bought this press. I'm having major issues getting my tops to look good. I keep getting white spots with no ink. After watching your video, I don't think I'm using enough pressure. I'm going to tighten the pressure and make a tumbler tomorrow. Hopefully that fixes my issue.
@tiffaneywilson7032
2 жыл бұрын
I adjusted the pressure and that did not help. I'm returning the press and sticking with my convention oven. My oven gives me perfect tops and bottoms.
@AngieHolden
2 жыл бұрын
Hmmm....Sorry about that. I have not had an issue.
@ladinina1412
8 ай бұрын
What is butcher paper and where can I purchase it from ? I'm first timer with trying to do cups. Need all the help I can get
@AngieHolden
8 ай бұрын
Try this: kzitem.info/news/bejne/26h7uJdjcoSreno
@kellymong5265
Жыл бұрын
Hi Angie, just received my Ecotank printer after 2 years of watching your videos!!! Now I'm looking for a mug/tumbler press. Can you recommend a good one that won't break my bank?? I'm wanting to start a small business but moving very slow, I want to make one time purchases and not panic. Your videos have given me the courage to take the leap!! TIA for any help you can offer.
@AngieHolden
Жыл бұрын
I do like the tumbler presses from PYD life.
@darlenevenus4398
Жыл бұрын
Do you prefer the tumbler press, mug press or convection oven? I am trying to decide if buying a sublimation oven is better than the mu r tumbler press.
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/1J1-nXywkISaapg
@albinsalguero6300
2 жыл бұрын
hi, I just ordered this machine I get it tomorrow. Have you ever used a laser engraver you should try one out you are very creative I am sure you would make cool things with it.
@AngieHolden
2 жыл бұрын
I have not. Just no time to do anything else.
@cherylbee9899
Жыл бұрын
I love tumblers with handles, but I do not like the color not going all the way around
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/sKVv22WacpaYgGk
@rebeccacook9167
Жыл бұрын
Great Videos! you cover all the details thank you!
@diannacarmichael7889
Жыл бұрын
My buzzer does not go off when the time is up. How do I fix that please
@AngieHolden
Жыл бұрын
Sorry not sure!
@JenLapent
Жыл бұрын
All of a sudden my pyd life press is ghosting at the tops. I don't get it. Nothing is different. Preparing and pressing same way. I'm frustrated bc they were coming out perfectly before. It's really more on one side than the other.
@AngieHolden
Жыл бұрын
Is there something wrong with the coil or the press?
@tracijesienouski5976
11 ай бұрын
What program do you use to get the correct size to print? I'm having trouble doing it on design space
@AngieHolden
11 ай бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@papamrk1343
2 жыл бұрын
First off, I LOVE YOUR VIDEOS!! Question: Can you ADD an image to a tumbler/mug that you had already sublimated?
@AngieHolden
2 жыл бұрын
You can sublimate again but it gets tricky. It can fade your first image.
@tammygrimshaw1844
2 жыл бұрын
Thank you for your video's. I wish I could find the tumbler press here in Australia.
@cindymartinez1335
Жыл бұрын
How do you mirror and resize the images for the tumblers? TIA
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@savorthesweets830
2 жыл бұрын
Any tips on wrapping cafe mugs. The have a weird curve/shape. Like latte mug
@AngieHolden
2 жыл бұрын
I have not made any of those!
@cathyrarden8073
Жыл бұрын
Thank you, very informative!
@lisawhite9725
2 жыл бұрын
Hi Angie, how is this tumbler press still working for you? How does it hold the heat and have you had any issues at all with it? Thank you! ❤️
@murphylaw2436
3 жыл бұрын
What do all of the red abbreviations mean on the display ?
@AngieHolden
3 жыл бұрын
I did not look up what each of those changed! I was just worried about temp settings!
@deborahknapp5524
11 ай бұрын
Where do you buy the 20 oz straight White tumblers?
@AngieHolden
11 ай бұрын
I get them from PYD Life on Amazon.
@connieohenley2234
Жыл бұрын
Can this press be adjusted to cone shaped (wider on the top, skinnier on the bottom) mugs and tumblers?
@AngieHolden
Жыл бұрын
You would have to get one that would take those types of inserts most likely.
@kguilliam4456
2 ай бұрын
Where do you get your heat resistant tape from please?
@AngieHolden
2 ай бұрын
Try this: kzitem.info/news/bejne/tqiJyniso4N4gXo
@lorrainefox6774
2 жыл бұрын
This was a very helpful video, thank you!!
@zindelvazquez2954
Жыл бұрын
Do you leave the access at the top without taping it? The sublimation paper itself I mean.
@AngieHolden
Жыл бұрын
I had some tape at the top but not as much.
@laurenpalmer6056
Жыл бұрын
Hi Angie - why would my design be coming up very faint/discolored?
@AngieHolden
Жыл бұрын
I am guessing not enough time or temperature. But it could be a wide variety of things. Start here: kzitem.info/news/bejne/rY-glqqJcp6Am6g
@amylouise2506
7 ай бұрын
Sorry to sound stupid but this is something I’d love to get into. Did you print the Halloween design yourself and was it off Cricut? Thank you
@AngieHolden
7 ай бұрын
Halloween design was from Creative Fabrica I think. I did print it on my sublimation printer. You will not be able to print large enough from Cricut Design Space for a tumbler like that however.
@amylouise2506
7 ай бұрын
Thank you so much
@tabathasteele7547
2 жыл бұрын
are you going to show doing the other size tumblers like the 30oz?
@AngieHolden
2 жыл бұрын
It would be the same procedure for each different size. You can do many sizes in this press so I definitely cannot show them all.
@morenag.7769
2 жыл бұрын
Omg! I’m so glad I found you! I’m new to all of this. You are a lifesaver!!! Btw I subbed! 🙏🏽❤️😊
@AngieHolden
2 жыл бұрын
Welcome!
@carlabrown2957
3 жыл бұрын
Great video Angie! Thank you! ❤️❤️
@AngieHolden
3 жыл бұрын
Thanks for watching!
@bobbyforte68
Жыл бұрын
Is there a particular software to make your prints.
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/zJyj4KaCp5WYm6A
@teresamasek104
3 жыл бұрын
Thanks Angie for this video, it was awesome
@AngieHolden
3 жыл бұрын
You're so welcome!
@tinar1142
5 ай бұрын
My man got me a tumbler press but I'm trying to figure out if I can do mugs that go small on bottom and big on top, or shot glasses without a conical. Do you know if there is a trick, it looks like yours.
@AngieHolden
5 ай бұрын
You would have to get attachments for those that work with the press.
@tinar1142
5 ай бұрын
@@AngieHolden ok, thank you. Someone mentioned silicone wraps or heat shrink wrap but I wasn't sure it would work.
@mariebibeyron3137
2 жыл бұрын
Hello possible to have them on 220 voltage french...
@AngieHolden
2 жыл бұрын
I am not sure.
@yvonnebrown1779
2 жыл бұрын
hi I know I asked before about heat temp the lady I bought my tumblers from said she does 315 another lady asked told me 400 I did the 400 came out a little too speckled but good so I see you do 356 what blanks company do you use I know you said the temp goes by the blank manufacturer please help sorry to be a pain also I like how in your vid you don't wrap the top just tape for security awesome
@AngieHolden
2 жыл бұрын
These are PYD life blanks.
@annnerren9370
2 жыл бұрын
I just purchased my tumbler press and when I press my tumbler. The first 2 tumblers I had to much pressure and I bent the tumblers LOL! I wish I would of saw this video before. Very informative! The paper also stuck to the tumbler and I had to use water to wash it off. I press at 365 for 70 seconds. I have the HPNation signature tumbler press that is there recommendations for pressing tumblers. Can you please tell me why my Paper is sticking and pulling off the white sublimation off the cup. HELP I want to be successful craft! 🤦♀😭😭😭
@AngieHolden
2 жыл бұрын
I would try adjusting the pressure. You may have too much and pushing the paper in.
@Checkmin
2 жыл бұрын
Can that Halloween tumbler you made be epoxied?
@AngieHolden
2 жыл бұрын
I would say so. I haven't ever epoxied one. It is permanent when the sublimation is complete.
@lynnewman8382
2 жыл бұрын
Hi, PYD Life has 2 different mug presses. The one you're demonstrating is the V2.0. There's also a V3.0. Is there a difference besides the price? Thank you
@AngieHolden
2 жыл бұрын
They did send me some information and it looks like they did change some things but I have not used the other one.
@dlilly4053
2 жыл бұрын
My tumblers are showing tape lines using this press. (Never had them when I used an oven) Any thoughts?? I've tried tightening the press and loosening it without improvement.
@AngieHolden
2 жыл бұрын
I have NEVER had this issue and have had many people say the same thing. The only thing I can guess is the brand of tumbler and the coating applied.
@terrypinkassr.6463
Жыл бұрын
I can not find that same model press?
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/26Rjzn6AiWdlqHY
@allisonwalker4441
2 жыл бұрын
Do you have a video on the designing sublimation image? I’m struggling in that area.
Question. We are using the same pyd press. 350-50-50 and keep getting a pinkish result on all of our tumblers. Some have said either to hot or to long. Using A-sub ink and paper.
@AngieHolden
2 жыл бұрын
350 is probably not hot enough. Check with the instructions for the tumbler you bought.
@lizgonzalez4781
2 жыл бұрын
What tumblers would work well with the Cricut mug press? I just ordered mine and would love to make some as gifts!!
@AngieHolden
2 жыл бұрын
Try this: kzitem.info/news/bejne/t65j1WeBoaZmkoY
@RBLACKPEARL7
3 жыл бұрын
My Next machine yes
@SassybyDesign3732
2 жыл бұрын
I have this heat press…can you use the glass tumbler/cans in this heat press?
@AngieHolden
2 жыл бұрын
Yes you can! I am reviewing another one too....using the glass tumblers! It will be up soon!
@digitus78
2 жыл бұрын
How do you not get a missing space/white line around the rim and bottom with a press?
@AngieHolden
2 жыл бұрын
For the rim, I run it all the way up and leave some extra. The bottom is trickier. I like to find a place to stop it so yes there it a white line there. If you don't want that, then you would extend the print and tape down really well.
@veronicaedwards6368
Жыл бұрын
hello Angie I am trying to find a tumbler press that has a 1.5 oz shot glass attachment does this perss have that? or do you know of one that you can recommend
@AngieHolden
Жыл бұрын
PYD Life makes several on their own website that are not on Amazon. Those have other attachments that I don't have for this one.
@veronicaedwards6368
Жыл бұрын
Ty!! I got one
@ashleyprice9487
3 жыл бұрын
So my question is should we the circuit mug press or this machine
@teresamasek104
3 жыл бұрын
As she mentioned it would depend on how much money you want to spend and how often you would use it.
@AngieHolden
3 жыл бұрын
It is definitely a personal choice. I don't think there is anything wrong with either answer.
@just.x.marissa
2 жыл бұрын
Can you do this with a regular HP printer? Or do I have to use that specific paper for it? Great tutorial!
@AngieHolden
2 жыл бұрын
You have to have a sublimation printer with sublimation ink.
@just.x.marissa
2 жыл бұрын
@@AngieHolden thank you!
@kimberleymorse5
2 жыл бұрын
Epson printers take sublimation ink.
@wendyhayes240
2 жыл бұрын
Do you have a video for a tumbler press vs the double door oven by Oster. Also have you ever use the water method to cool the tumbler down a little.
@AngieHolden
2 жыл бұрын
I have a video comparing the mug press to an oven: kzitem.info/news/bejne/1J1-nXywkISaapg and I don't cool my tumblers at all.
@jerritanner275
2 жыл бұрын
Angie, HELP!!! I’m having a terrible time sublimating tumblers. I started slow with an EP printer, A-sub paper, Hippoo ink & an oven & had some success. I ordered a case of tumblers from Craft Haven & the results weren’t as good in the oven. I want to do this regularly so I invested in a tumbler press. I’m using the same printer, ink & paper, wrapping the tumblers as tightly as I can & the results are horrible. Craft Haven recommended 360-375 for 60 seconds & I have the pressure set pretty tightly. I’ve tried varying temps within the range that they suggested, but the print on the dark blue logos I’m doing come out looking like someone took sandpaper to them. I’m running out of tumblers AND patience, & my friend really needs these tumblers. What should I do?
@AngieHolden
2 жыл бұрын
I think I emailed you as well. I would check with Craft Haven and see if there is an issue with the tumbler.
@arhodes
2 жыл бұрын
I am having tape impressions, that is going through my A-sub 125g paper. I'm not sure what might be causing this. I am using Tumbler Press PYD. I have used PYD tape, yellow tape and the cricut tape. I'v used the range of 350ºF- 360º 50-65sec/flip 50-60sec again.I have tried light and medium press. I don't even have a seam showing just the darn tape line that is going through the sublimation paper. What might be causing tape impressions, any suggestions? :|
@AngieHolden
2 жыл бұрын
I have never had this happen. I am wondering where you got your blanks?
@tinacrossan3318
9 ай бұрын
Can you press glass cups??
@AngieHolden
9 ай бұрын
Yes you can.
@CharlyPacheco
2 жыл бұрын
Hi .. I order these one Do you think I made a good choice I want to do the tumblers Mugs and glass
@AngieHolden
2 жыл бұрын
I love mine!
@ninascraftypants
3 жыл бұрын
how do i measure a tapered 20oz tumbler to add design on cricut design space.the design space only lets me print 9.25 in diameter
@AngieHolden
3 жыл бұрын
I would do it in a different program. Try this: kzitem.info/news/bejne/tX2X0pxsmpSHZKw
@ninascraftypants
3 жыл бұрын
@@AngieHolden I was hoping for something that’s free
@AngieHolden
3 жыл бұрын
I have Canva as an option there and it is free.
@jmoss55ish
2 жыл бұрын
Did I miss what the dimensions for the sublimated paper is for the tumblers?
@AngieHolden
2 жыл бұрын
You need to look up a template for the tumbler you purchase.
@bossladyphipps321
2 жыл бұрын
Which one is better the all in one tumbler press or the regular tumbler press
@AngieHolden
2 жыл бұрын
I have only used this one.
@bossladyphipps321
2 жыл бұрын
@@AngieHolden thanks for the reply.
@sherryprince5856
2 жыл бұрын
I really like this tumbler press I am in Canada and on Amazon its not available can you recommend how and were to purchase one?
@AngieHolden
2 жыл бұрын
Sorry. I am not sure!
@Mfleclerc
2 жыл бұрын
Thank you so much for your video. I have an Elite Tumbler Heat Press, but I think it would be the same. Can we use Cricut Infusible Ink Transfer Sheet? My first items will be the skinny 12 oz wine tumblers.
@AngieHolden
2 жыл бұрын
Yes you can use Infusible Ink!
@Mfleclerc
2 жыл бұрын
@@AngieHolden awesome! Thank you for quick reply
@sarahmiller3563
Жыл бұрын
So do you not have to use proxy or anything to finish it off?
@AngieHolden
Жыл бұрын
Not with sublimation.
@sarahmiller3563
Жыл бұрын
Do you order your own prints or do you have a printer? I'm interested getting the machine but if I don't have a printer wanted to order the sheets... is that possible?
@AngieHolden
Жыл бұрын
Try this: kzitem.info/news/bejne/w61r0pN6kHl_pKA
@vidhividhi7638
3 жыл бұрын
Hi. I am new with tumblerpress and never used before. Can you let me know do we Need sublimation printer and print on sublimation paper everytime. If yes, is there a cheaper option
@AngieHolden
3 жыл бұрын
Try this: kzitem.info/news/bejne/jpxq1XxosV9_qGU
@debraplumley4831
2 жыл бұрын
When I was reading the manual it says 400/60 seconds but I notice you did 360/50 seconds and twice. Did you lower to compensate not burning so you can turn it?
@AngieHolden
2 жыл бұрын
I always get my time and temperature from the sublimation blank. The manual just gives you a general idea for all tumblers but to be more specific you will want to check on your blank.
@heathermizell1195
2 жыл бұрын
does it matter if you using a different heat press? or they are the same temp?
@AngieHolden
2 жыл бұрын
Generally the same but you may have to experiment. An oven would be different.
@jenselle2933
3 жыл бұрын
Angie is there a reason that you need to rotate? If the press fits all the way around the tumbler.
@AngieHolden
3 жыл бұрын
It SORT OF fits all the way around. There is a small gap at the top. I feel like rotating is safe to make sure you get a good print.
@allisonwalker4441
2 жыл бұрын
What brand is your tape dispenser? I’m having trouble finding one that fits my heat tape.
@AngieHolden
2 жыл бұрын
I actually just found a new one on Amazon that I am testing!
@leeandaudreyroberts7006
2 жыл бұрын
Do you need to do anything to the tumblers after your done? Like coat them with anything or are they just good to go after pressing, and ok to wash and not destroy the project. New and watching videos before I start.
@AngieHolden
2 жыл бұрын
Sublimation is permanent as soon as you press and ready to wash.
@yvonnebrown1779
2 жыл бұрын
Hi since I have a tumbler press would it be ok to use shrink wrap so I know the image is snug to the tumbler
@AngieHolden
2 жыл бұрын
I have not ever used it as you don't have to with a press.
@michellecunningham2254
2 жыл бұрын
The pyd press is sold out :( Can u recommend a similar one? Thank you for this video!! I definitely want one!!
@AngieHolden
2 жыл бұрын
Sorry! Hopefully they will restock soon!!
@denniss7805
2 жыл бұрын
Hello, what weight an brand paper do you use if you don’t mind me asking
@AngieHolden
2 жыл бұрын
Try this: kzitem.info/news/bejne/1q2kq66ucqiQpoY
@msmetrice
3 жыл бұрын
Can you use shrink wrap instead of paper for protection??..
@AngieHolden
3 жыл бұрын
I think that would just be more expensive? I wouldn't recommend it.
@rameyj2
3 жыл бұрын
Love the video , I went through it a few times . When I get to the end to set temp it goes to 5P. The out does not light up. Do you have any idea what I may of done wrong. Machine just in today.
@AngieHolden
3 жыл бұрын
I am not sure?
@Slag1980
3 жыл бұрын
Jackie..did you figured that out? I am having the same issue😢 Thanks
@jeosmomm0611
2 жыл бұрын
So Im still using an oven until my press arrives. Im hoping you can answer this question. My tumblers all come out beautiful except on the seam. I always have fading along it. I cant for the life of me figure out why. Any suggestions?
@AngieHolden
2 жыл бұрын
My guess would be you need more tape down that area as it isn't tight enough. Are you using shrink wrap around them?
@josephinejacobs2159
2 жыл бұрын
Have you sublimated in an air fryer/confection oven?
@AngieHolden
2 жыл бұрын
I see you found my video on this!
@RainorShine1
2 жыл бұрын
Where or how to get the ghost glow in the dark? What product did you get to glow in the dark paper?
@AngieHolden
2 жыл бұрын
The sublimation tumbler itself was a glow in the dark tumbler. I just pressed the ghost image to it.
@lillipadgiftsinc
3 жыл бұрын
Angie, Do you know what each of the letters mean in the settings? Are they supposed to be set on anything specific? Or do we only need to use the cTr choice?
@AngieHolden
3 жыл бұрын
I don't know what each of those mean. I left them on the defaults.
@gerrywolfe2549
Жыл бұрын
Great video. Thanks for all the tips.
@lillipadgiftsinc
3 жыл бұрын
Angie, My time/seconds won't count down when I shut my press, can you help me figure out how to make it count down? I can't figure out how to change it to "out"... Thanks so much, Jamie
@AngieHolden
3 жыл бұрын
Are you setting the time then exiting the setup?
@stephaniegilbert6864
3 жыл бұрын
Did you ever figure this out? I’m having the same problem
@hollyjacobs5188
7 ай бұрын
I need help. I have the pyd tumbler press. It worked perfect for my first mug. The second one was fine on the top half and the black was faded and brown on the bottom half. The third one was all faded brown instead of being black. I’ve tried many variations and they are still coming out faded. I’m using the recommended settings of 120 seconds at 356. I tried more time. And then I tried less heat at 300. Still the same results. Any idea?
@AngieHolden
7 ай бұрын
Sounds like maybe uneven heating or uneven pressure. The brown sounds like maybe you are burning it.
@lisayoung3737
2 жыл бұрын
Hi i have the same pyd press. the only places i have issues with are the top and bottom it burns no matter if i tape or not. Is it too tight on these areas ? I can't afford to ruin any more tumblers. Btw they are 20 oz tumblers. Can you possibly help on the adjustments ? Thank You
@AngieHolden
2 жыл бұрын
I have not had that issue. I would back off of the pressure and maybe lower the temperature some. I am also wondering if it is your tumblers and if they are thicker or thinner in that area.
Пікірлер: 355