Great video man. I took all my bearing out while I was waiting for the new ones to get delivered and forgot how everything went back together. I've watched a bunch of videos and yours is the most helpful.
@MrDen119
2 ай бұрын
Thanks man, nice to hear! Happy that it helped you out!
@Reichaus
4 ай бұрын
Thanks for the detail! I could not get my lower shock bearing to press out, found out after watching your video, there is an inner, inner diameter that the race actually seats on... Mine was really dirty, just looked like a really thick race! It was long day prior to working on the bike, that's my excuse. 🤣 Cheers
@MrDen119
4 ай бұрын
Haha glad you worked it out with the video! We all have those kind of days 😂
@oscar4605
8 ай бұрын
This vid is just what i need great stuff
@MrDen119
8 ай бұрын
Awesome, thanks for letting me know!
@drunknmonkey8875
4 жыл бұрын
Really enjoying this build! Keep it up!
@MrDen119
4 жыл бұрын
Awesome! Very nice to hear 👌🏼 i will do my best! 🏍💨
@AaronDukes-pi8ys
3 ай бұрын
Very helpful 🐱
@robertpetty4649
Жыл бұрын
Don't forget the upper Heim joint nextime....and use heat when you remove the bearings and bushings...heat is your friend. Also, don't spin your finger around those uncaged needle bearings...push and pull your finger over them when applying grease...no circular motions....those little buggers can still fall out. Not being critical, you made a great video for the average guy...
@Septiclivin
2 жыл бұрын
Thank you for posting, good video
@MrDen119
2 жыл бұрын
No problem, glad it helps! Thanks!
@AustinPTH
3 жыл бұрын
Thank you for posting!
@MrDen119
3 жыл бұрын
Thanks for the comment! 😉 Happy to hear that the video helps!
@otisarmyalso
9 ай бұрын
Thanks
@danshealthylifestyle8443
4 жыл бұрын
Great job
@danshealthylifestyle8443
4 жыл бұрын
Thanks man I liked and subscribe
@MrDen119
4 жыл бұрын
No problem! Thank you, I appreciate it a lot!
@joshuaculleton3047
3 жыл бұрын
Insanely helpful video. Cheers mate!
@MrDen119
3 жыл бұрын
Awesome, thanks mate for letting me know! I truly appreciate it!
@jeremydesrosiers1473
2 жыл бұрын
what the year of the bike ? and nice video relay help me. but just wondering what year is it because you have some stuff that are different i have a 2014 250
@MrDen119
2 жыл бұрын
This is a 2017 250sx. So that explains the differences, compared to your 2014. Any big differences? Thanks for letting me know, glad it helped!
@jeremydesrosiers1473
2 жыл бұрын
@@MrDen119 the part with to like 3 inch little pole its not the same scuse my english im french 😉
@MrDen119
2 жыл бұрын
No problem mate! I understand what you mean! 😉 The linkage can have some differences indeed.
@andrewwills-kn9uv
Жыл бұрын
Bottom end bearin sides
@maximenuyts1908
2 жыл бұрын
Wat vinden voorlopig van deze prox lagers? Gaan ze lang mee of niet ?
@MrDen119
2 жыл бұрын
Prox is een goed merk! De lagers zitten er al 2 jaar in nog niks aan gemerkt. Hoe lang ze meegaan ligt er natuurlijk aan hoe en waar je er mee rijd. En met afspuiten niet vol op de keringen spuiten helpt ook ;)
@maximenuyts1908
2 жыл бұрын
@@MrDen119 Danku voor uw antwoord. Ik ben altijd redelijk bang om geen originele onderdelen te gebruiken maar als je zegt dat die al zeker 2 jaar meegaan heb je me overtuigd om dit ook te proberen. En het is goedkoper
@MrDen119
2 жыл бұрын
Prox wordt veel gebruikt ook in de motor zelf en door dealers. Zelf ook altijd goede ervaringen mee gehad ;)
@daneast
3 жыл бұрын
I had a terrible time getting the old bearing races out of the long link piece. I ended up having to chisel between them and the aluminum and prying them out that way.
@MrDen119
3 жыл бұрын
They can be a real pain in the a$$. Depends on how long they have been in there and the conditions they have been in can really lock them in to place. I had to use quite some force as well. For the next time, some heat can make the job easier as well, heating the link with a gas burner for example.
@vindiesel5466
Жыл бұрын
Had the swingarm on my husky off today, no washers were used on the chain side, and the brake disc side had a washer on each side of the bearin. I've had the bike since new so must be a factory error
@MrDen119
Жыл бұрын
Interesting, that could be. Which year is the bike from, maybe they changed something
@vindiesel5466
Жыл бұрын
@@MrDen119 it's a 2015 model
@kevinearls7496
10 ай бұрын
I know this is old, but that is the way they come for many years. Look at the parts diagram from somewhere that sells OEM parts and you'll see washers only on the chain side.
@teddyf9438
3 жыл бұрын
Is it safe to tap out the bearings with a screwdriver? You're not worried about scratching/gauging the inside of the linkage?
@MrDen119
3 жыл бұрын
You have to be careful and pay attention to where you point the screwdriver. But the hole in the linkage is a bit narrower in the middle. That helps a little in keeping your screwdriver away from the inside where the bearing sits. Also, I’m only doing one bearing with a screwdriver because after that you can fit a socket through to push the second one out.
@aydingaragemotor5527
Жыл бұрын
Nomer bearing nya berapa untuk swing arm
@M.Running
3 жыл бұрын
Wow - (edit, change camera angle) wow again (edit, change camera angle) wow (change camera angle) wow (change camera angle) wow ( change camera angle) wow (change camera angle) wow(change camera angle)wow(change angle)wow(puke)change channel angle
@MrDen119
3 жыл бұрын
Thanks for the feedback, i was figuring out the whole editing and video making thing. In my newer videos i changed my approach a bit so less editing/cutting is necessary. Hope you won't puke watching those ;).
@M.Running
3 жыл бұрын
@@MrDen119 👍 great info though, thanks for posting
Пікірлер: 42