When he casually said, "The added rgb on the top and bottom, which will definitely guarantee you a few extra frames per second." I legit choked on my coffee.
@DeciSiv3
22 күн бұрын
he aint wrong 😂😂
@giordano_toscano
9 ай бұрын
Man you are the absolute GOAT when it comes to pc build guides. You are the reason I was able to build my first computer ! Cheers from Brazil
@mstr2e
3 ай бұрын
Never built a pc in my life. 2 videos from your channel was more than enough for my build. No one explains everything like you. Thank you.
@crharns-72
6 күн бұрын
I just finished my first ever PC build in this case, and I would just like to say your video was extremely helpful! It made the process very enjoyable and snag free. Thank you so much!
@Junes-youngVirgo
2 ай бұрын
U deserve a crown 👑 for the way u explain...bro u didn't leave anything behind❤❤❤I salute u
@RoamingWithRobert
2 ай бұрын
Thank you for being so thorough and clear. No frills.. exactly what i needed.
@RailgunNZ
9 ай бұрын
Appreciate the great video. This case and fans are at the top of my wishlist. Evo RGB > Vision
@WootMoo
7 ай бұрын
Thank you so much for this well detailed case review and assembly. I really appreciate that you went through all the details of the case and even assembled a full setup while going over where all the plugs go such as usb headers and more. It can be a little overwhelming being new to pc building but you've pretty much answered all my questions with wiring and setting up in this case with one video. I'm more confident to build my new pc once the rest of my parts arrive. Thank you so much 🙏
@Browser404
9 ай бұрын
Another great build and guide. Appreciate all the videos throughout the year Christopher 👏👏👏
@ChristopherFlannigan
9 ай бұрын
Thanks
@maysmerrydays
6 ай бұрын
Christofer thank you so so much! I built my first ever pc based of this video a week ago, I had a lot of similar parts, and the way you explain things is just awesome.
@bigman8733
9 ай бұрын
The best PC build guide channel on KZitem. I had my 3rd try recently at building a PC in a white NV5 for my girlfriend recently and couldn’t have done it without being able to refer to your videos! I have the O11 Dynamic Evo but this RGB version and the new fans are absolutely stunning
@fud1376
9 ай бұрын
That's the Best Case I've seen....Nice !
@ChristopherFlannigan
9 ай бұрын
It's really good
@e_4639
6 ай бұрын
i have been bulding/working on my pc for 3d now and your video was my savior really id be so lost without it, at so many steps hardware or software wise, thank you a lot for this video, truly! was able to build all and synch the rgbs welly the result is amazing
@andrewbray772
2 ай бұрын
i was looking for someone who would go through tbe process of building a pc at my lebel of understanding and here he is. 👊
@bads197
14 күн бұрын
I bought this case and was just looking for videos on people that built one. I didn't know you could mount the GPU vertical or hanging. I just thought the case was cool. Having literally stepped away from computers 10 years ago, aside from a basic laptop, I had the need for someone to show me what all the fancy features were for this case. Water cooling.... when I first did water cooling, we used fish tank water pumps and beverage tube from a beer supply store and a copper water block off a website I found. Now there is all in one systems! ok, ok enough reminiscing about the good old days.. Your video is awesome. I hope your sponsored by a lot of companies because your tutorials are top notch!
@HarrisonSiegel
9 ай бұрын
Your videos are excellent, thorough beyond belief, and have helped me with multiple builds now. The extra features in this case really show Lian Li's commitment to thinking about what would improve the build experience and is by far and away the best design improvements from the already excellent O11 -> Evo -> Evo RGB (I have built in the first two and can't wait to do my next build in this rig, or maybe an O11 Vision RGB if/when that comes out!)
@Giangodoy1695
9 ай бұрын
Chris, without you i would not have the motivation to build a pc. Im saving now to buy some day and i will use your videos as a guide. You are really the best at what you do. i never seen someone explain all so detailed like you do.
@Uasaxtele
Ай бұрын
Built my new PC alongside your video. Damn your voice is soothing!!!! Never felt more relaxed handling €3500 worth of parts
@X2XO99
2 ай бұрын
You're a lifesaver! You've made my life and the task of building my first pc unbelievably stress free for me. Thank you!
@jonboy2950
9 ай бұрын
Thank you, been looking forward to your video on this case. Also looking forward to your video on the Phanteks NV9. I base my buying decisions on your videos so no pressure 😊
@ChristopherFlannigan
9 ай бұрын
Have to see if Phanteks send one, I'm not chasing one, enjoying a well earned break after this one
@NsureU
3 ай бұрын
Absolutely love this build my case is coming in tomorrow. I cannot wait to build this BADBOY! just wish you had the brackets for vertical mount or horizontal mount for the gpu
@Greega-k2f
18 күн бұрын
Thanks to your video I learned all about this awesome case. Thank you!
@johankooistra9332
7 ай бұрын
I see we did cable management exactly the same :D , I have the white version of the case, it's absolutely beautiful!
@All_Systems
6 ай бұрын
I don't think there's anyone who does it better. Class 🔥🔥
@fishyyyyyyyyyyy7921
6 ай бұрын
Thanks for the video, this is really what I need now.
@Arctic2724
7 ай бұрын
I could't figure how to get into the pure color mode thanks so much!
@deathkult
4 ай бұрын
This case is awesome. Your guide was very helpful as i wanted to build something similar. Thanks !
@ricardorocha4436
9 ай бұрын
Awsome! It would be great if Lian Li made an Evo RGB version os O11 Dynamic Mini. That case really needs an upgrade.
@3_kids_one_shot726
9 ай бұрын
oh baby!! that just means the o11 mini variant is around the corner. cant wait!
@R4T_10RD
9 ай бұрын
It's really interesting that this case is actually functionally very different from the vision. I thought that the the RGB and vision would have little differences.
@ChristopherFlannigan
9 ай бұрын
Good to have choice
@z9297
4 ай бұрын
At 12:44, he mentions that the stand-off removal tool is in the "case accessory box," which had me confused for a while because I couldn't locate one. I eventually found it inside the GPU anti-sag kit box, which is inside the case accessory box.
@gezinax2307
21 күн бұрын
Thankyou for your comment, it helped me a lot! I also couldnt find it and was lost on how to do it🫣
@z9297
20 күн бұрын
@@gezinax2307 I had totally forgotten about this comment, lol. I am glad to learn it was able to help someone! Good luck with your build!
@casyo
8 ай бұрын
I love the reverse mode, didn't get the need for it though. Have my case on my left at the moment, looking into the case, as it is angled like 45deg... sure, cables need to be a bit longer but beside that...
@leedonghyeon7781
8 ай бұрын
This man is legendary
@adrienmeesemaecker2054
16 күн бұрын
Thank you a lot for your great video
@_BioX
9 ай бұрын
This is a really nice looking build.
@fabiangosebrink6785
5 ай бұрын
Thanks for your absolutely amazing Videos. I have watched the videos about the O11D Evo and Evo RGB. In this video, you use a ROG STRIX 4080 in an upright position in the RGB case. My question is: can the Lian Li O11 Dynamic EVO RGB hold a ROG STRIX 4080 upright when the case is reverted? Thanks!
@carbonibrenesk
2 ай бұрын
X2
@antoniocampione8831
7 ай бұрын
Amazing and well detailed guide. I’ve built many pcs throughout the years but being able to follow a step by step guide is always the easiest for me. I’ve only a question: I’m having a really hard time putting the bottom fan brackets in the bottom of the case after screwing the three fans. Doing it with the motherboard in the bottom position was basically impossible because there was such a small clearance from the fans and the connectors on the bottom of the motherboard. Now I moved the motherboard in the upper position but still having hard time to fit the damn bracket in the bottom… in the video at 47:15 you do it effortlessly, and even with the motherboard in the lower position… What am I doing wrong? I double checked and the orientation of the bracket is correct.
@mainsource8030
28 күн бұрын
aare you using 140mm fanns?
@The11devans
9 ай бұрын
What a gorgeous build! Shame about the riser color, it would be a total knockout with the red/blue on the front of the ROG card visible.
@ChristopherFlannigan
9 ай бұрын
That was the plan, gutted when I opened the box
@phillamoore157
8 ай бұрын
This seems like a very well built case, for the people who've been able to get there's assembled. But the variations in these cases in combination with the catastrophically written "instructions", make trying to understand how these units fundamentally go together, excruciating (at least in my case). *I watched the build you did with the white case that had the exact same model name as mine, and I didn't have the parts you had (i.e. vertical GPU parts, and fan adapter rails). Do I have an updated version??? If so, where do I find that, so I can watch an appropriate video? Like I said, the instructions are all but worthless, making this EXTREMTELY confusing.* I could slop this together, and put screws where they seem to fit, but I'd like to assemble this the way they designed it, to get the most out of it. I'm anxious to hear your thoughts on this... For what it's worth, your videos are excellent, and obviously needed given the number of views you've gotten... They strangely just don't seem to apply to my model which, again, is the exact same (at least by name).
@ShawnStrickland
9 ай бұрын
Merry Christmas!
@awelder4040
6 ай бұрын
Very Informative...!! Well Done... :)
@CasualXCars
9 ай бұрын
Excellent quality and very clerarly explained what is being done. Talking could be little slower... also white table is not the best background when showing components and parts because it blasts across the screen whoever is watching the video.
@giordano_toscano
9 ай бұрын
I just bought the EVO XL version. Could you consider doing a step by step guide for the Lian li O11 EVO XL in Reverse mode (just like you did for the original EVO)? or maybe the best fan config for the reversed case.
@davidhastings9396
9 ай бұрын
What is the electric screwdriver that you are using? I have been thinking of getting one.
@eliteelitebob
7 ай бұрын
If you plan on doing a video with the reverse build soon lmk! I need the help
@carbonibrenesk
2 ай бұрын
It's already in the channel
@kingreptor8794
8 ай бұрын
Thanks for the video
@HassanSerhan-g2c
8 ай бұрын
Man the way u said it will definately garantuee few frames per second with a stright face killed me 😂😂😂
@TheKarameagle
28 күн бұрын
I followed all steps and 4 days later, my front panel audio cable caught on fire and melted. Luckily i was in the room when it happened and i was able to shut down the pc on time and cut the power out.
@Saigon2D
Ай бұрын
I was wondering where did you get the plastic tab for the fans at @44:08? I can't find it in any of my boxes...
@jimmsch
5 күн бұрын
So I just did the reverse mode option and my side panel will not snap into place. It sems like the LED strip on what is now the top of the case is preventing it. Has anybody run into this issue? It will snap in upside down, but it falls out real easily when you remove it creating a possible bad scenario.
@abreu7756
8 ай бұрын
best of the best
@TheTransformationBodySwap01
7 күн бұрын
Which fans do you have set to exhaust and pulling air in? Cause with the new fans you can’t tell which way is exhaust and which way is pulling air in.
@CyrusRocco
6 ай бұрын
Very good video, helped me a lot. Which electric screwdriver do you use?
@TheBenzKid
9 ай бұрын
At 20:00 I'm surprised you didn't address the gpu sagging and how to adjust the gpu adapter to fit the card.
@carbonibrenesk
2 ай бұрын
It's explained in an older video with the non RGB version
@TheSjuris
Ай бұрын
@@carbonibreneskthey use a different version
@carbonibrenesk
Ай бұрын
@@TheSjuristhat's what I say with different words
@TheSjuris
Ай бұрын
@@carbonibrenesk the original evo has a different solution
@carbonibrenesk
Ай бұрын
@@TheSjurisI'm not talking about the original evo, but the O11 Dynamic Evo
@29loot
3 ай бұрын
Why 120 and not 140 mm fans ?
@gabrielcorso8346
Ай бұрын
It sounds mine came with a defect.. The side glass panel wont get in place because the guiding holes are smaller than they should be.. I'll be contacting Lian Li and the seller about this and check what they say about this..
@mainsource8030
28 күн бұрын
Did you have trouble getting the reset button working with the strix e-e and that case
@MrGrumpyGoose
8 ай бұрын
Does it matter which direction the IO's on the Strix face for temp reasons? I can only find conflicting information about the vapor chamber and the whether the IO's should be up or down. I noticed yours is up and another video I have watched they put it down. Awesome video by the way, putting my first build in 12 years together right now!
@mistacrust
6 ай бұрын
Just about to pull the trigger on a build similar to this in an Evo RGB, 14900k with the Galahad II LCD SL-INF 360mm Performance. My fan selection is identical otherwise with triple pack TL LCD 120's reverse flow, triple pack TL 120's reverse flow and a single TL LCD 120. Am I right in thinking that I only need two USB 2.0 headers on my motherboard for this configuration? One for the UNIFAN controller and one for the Case RGB? Many thanks. Also, as a side question - are you satisfied with leaving all control of pumps and fans in L-Connect 3 or should I do it differently? Super helpful video and a thumbs up from me.
@s1mbaaaaa
9 күн бұрын
my rgb on my case is not on, everything else is lighting up except for the strip :(
@fatihyildiz2731
2 ай бұрын
Thank you for your video, I am writing from the translation, please excuse any missing or incorrect pronunciation. I will buy this case, but I will install a 360 mm radiator on the upper part and do pull push. Can I install 3 140 mm fans in the middle part?
@ZodiarkAmd
7 ай бұрын
I can no longer control the two led strips of the falls via the buttons. Did it happen to someone else? How do I solve it? Thank you
@venomvenom6971
9 ай бұрын
Looking for the reverse build aesthetic, heard that there’s a gap between the glass panels when the bracket or beam is removed.
@jamesking5217
8 ай бұрын
Christopher: Perhaps I missed this answer in a previous video. If so, my apologies. Do you design the fan supply/exhaust configuration, including the radiator fans, to provide postiive pressure within the case to minimize dust collection? Want to build a PC for Flight Simulatior and enjoy your videos. Thank you for NY, US.
@gortex79
9 ай бұрын
In reverse mode did the glass panels meetup properly in the corner ? Another KZitemrs review case the panels left a gap in reverse mode only and wondered if that was a 1 off.
@peter8372
4 ай бұрын
In almost every build with this case the lower position is used. They squeeze the bottom fans in and have a lot of space at the top. Weird...
@Souljax52
6 ай бұрын
Question. When i try to play some gifs or mp4s on the fans with lcd i got really bad "fps drops". it doenst look smooth. any idea why?
@sunnyvaletv8901
9 ай бұрын
Do you think the Arctic Freezer 420 AIO would fit in the top of this case using the provided brackets?
@09wheelerr
8 ай бұрын
This is what I want to know. I did wonder why he didn’t continue the build with a 420 radiator in as it’s one of this cases unique selling points.
@TheSjuris
Ай бұрын
@@09wheelerr very few actual options for a 420mm aio.
@ZodiarkAmd
7 ай бұрын
Can I ask you why you didn't prefer to put the motherboard in the high position? :) Thank you
@parksyboii666
6 ай бұрын
I just got the same case would you recommend all reverse fans or mixed? I'm a bit stuck on which to get I'm getting these fans too
@TheDarkKnight2064
5 ай бұрын
Just get reverse blade for the 3 that go vertically and the rest the same
@RasmusJosefsson
9 ай бұрын
Awesome video, but I think I would move the motherboard up one step I think 🤔
@davidji7025
16 күн бұрын
Can you control the rgb strip outside the case with the l connect software?
@lexluthor3145
9 ай бұрын
Those fans are beautiful but with one costing 50 bucks, a single exhaust at the back would be fine. The build will also will look cleaner.
@ChristopherFlannigan
9 ай бұрын
2 looks great in the vision
@mainsource8030
28 күн бұрын
so get the uni fan sl infinity's, 3 pack is 89 dollars now with a controller
@StolleJay
7 ай бұрын
It is also possible to use the Top I/O-Panel Kit for the O11D RGB Case?
@WayneOfficial1
7 ай бұрын
one question do i need the one single fan in reverse or normal if i want to blow air out?
@therealfaxe7542
6 ай бұрын
Can i build a pc with 8 uni fans and a lt720 with only 1 argb slot on my board?
@alejandrosilva9683
9 ай бұрын
So this is just a 011D Evo refresh, with rgb and 140mm fans?
@KainsAddiction
4 ай бұрын
How do you only have 80k followers, wtf
@jay11cee
9 ай бұрын
Which chipset version to choose? From Asus or straight from AMD. Asus is newer?
@BrandyDerg
9 ай бұрын
would the DeepCool AK620 fit in this Case?
@ChristopherFlannigan
9 ай бұрын
Yes
@AnasChb
4 ай бұрын
42:30 what's the name of this exact fan connector? really need to replace it
@milenkrumov6579
5 ай бұрын
Hello everyone.. I started building a computer but ran into a problem, if you can call it that... I have a Lian Li O11 Dynamic EVO RGB CASE and Lian Li UNI FAN SL-INF 140mm I have a technical question regarding the installation of 3 X 140mm fans which are on the front, i.e. to the right of the motherboard...I can't screw more than 8 screws there because the upright bracket is a bit short. ..On the first and last fan, the upper screws, which are 2 each, have nowhere to screw....The fans I watched a video in which 3 fans of 120 mm fit perfectly and all 12 screws are screwed to them... But for 3 fans of 140 mm something is not right... Does anyone know where I'm going wrong?
@Zufield
5 ай бұрын
If you're using the 140mm UNI fans, you can skip the top and bottom mounting screws.
@rickettsshemar
8 ай бұрын
Can you make a build on the LIAN LI V3000 case?
@JustCarnivorousCupcake
9 ай бұрын
Your videos are brilliant and this one's no different, thank you for your thorough explanations. Quick question tho, would a 7800x3d be good for a pc more used for productivity/workstation stuff? And would it pair with an rtx4070? I have always had intel (prebuild), but I don't like them retiring the LGA1700 so fast and I want my first build to be a bit more futureproof
@vsynccx4263
7 ай бұрын
A month late, but intel is by far superior for any productivity/work and decent for gaming on the side. If your a hardcore gamer than AMD is superior. And as far as futureproofing if you buy the best of either it usually always last the longest.
@JustCarnivorousCupcake
7 ай бұрын
@@vsynccx4263No worries, thank you for your reaction! This helps with my decision, I'm probably gonna go with either i7 13700 or 14700, whichever I can find the best deal on :)
@vsynccx4263
7 ай бұрын
@@JustCarnivorousCupcake Yeah, those cpus are really good regardless of what you do. 13th gen is dead though, so down the road you won't be able to upgrade
@Tony-ih5qz
8 ай бұрын
Is the radiator mounting bracket supposed to be included with the AIO? Do some AIOs not come with a bracket? Asking cus mine didn't
@mainsource8030
28 күн бұрын
think about what you just asked, how would the bracket fit in different cases. it obviously comes with the case not the aio
@philippbusch764
6 ай бұрын
Can someone please help me? I’m new to pc building and bought this case and a deepcool sc790 argb and fan hub. Can I control the led stripes via this hub with my aorus mobo/ gigabyte software? :)
@rsmart84
9 ай бұрын
Pre ordered my case, any idea when they release UK?
@cipher8851
9 күн бұрын
Will a 450W power cable power my 4080 super gpu?
@slisyd
5 ай бұрын
How is the performance of the GPU upright? Any issues?
@mr.impact7368
9 ай бұрын
@christopher flannigan - Upright GPU okay for temps?
@phabran
4 ай бұрын
I have this Evo RGB case and TL / TL LCD fans, but I can't control all devices with L-Connect because there's no way to connect the case to Lian Li TL hub. The only way I could set it up is by controlling rgb through the motherboard and using a third-party software like SignalRgb. Besides it doesn't have full support to tl hub, it works. How do you control your rgb devices?
@TheSjuris
Ай бұрын
Alas, the cases rgb can only be controlled by either the buttons on the side panel or through the motherboard software/openSignal.
@mainsource8030
28 күн бұрын
if you can get ahold of the lian li sl infinity l connect uni hub box it has 2 x aux ports , thats how i can sync my 011 evo rgb with the tl lcd fans, you will need an extra usb 2.0 header and its a shame they didnt put aux ports on the tl hub but i think it couldnt handle the power
@ItWasBrilliant
3 ай бұрын
Does Lian li 011 Dynamic Evo RGB (Black case) have tinted glasses?
@TheSjuris
Ай бұрын
Yes
@SlickSonicTitan
7 ай бұрын
Problem is these new O11's keep getting wider; dynamic=272, evo=285, RGB=290, Vision=304mm. I need a new case for 4090 my icue 465x with front rad wont do it but i like the case and its 216mm wide.
@mainsource8030
28 күн бұрын
because the gpu's are getting wider
@coelhoengineer
3 ай бұрын
Does anyone have the link to the reverse mode? I don't think he linked it.
@sjames247ify
3 ай бұрын
just finished identical build. and ive ran out of usb headers on my MB :( . 1 for the case rgb, which leaves 1 to run AIO and 4 more fans. I dont know how u did it.
@TheSjuris
Ай бұрын
The tl fans use a pci-e cable.
@mainsource8030
28 күн бұрын
the rog strix x670e -e has 3 x usb 2,0 headers, so you didnt do the exact build
@81bestof
7 ай бұрын
How are the lian li fans vs noctua nf-A12?
@reverendball
6 ай бұрын
@ 7:49 the top and bottom do support 3x 140 fans the side does not just learned that the hard way today
@bonito_1196
6 ай бұрын
It doesn't fit fit. Or most of the screws dont fit? And which fans are you using? On the lian li site it says it only supports 140mm uni fans. Been thinking about buying this case. But with p14 argb since its 3x cheaper.
@reverendball
6 ай бұрын
@@bonito_1196 triple 140 fans fit in the side panel, but don't fit in the GAP where it's supposed to go back into
@mainsource8030
28 күн бұрын
@@bonito_1196 i have 3 x 140's in the top and bottom
@nooral-khafaji1479
9 ай бұрын
Can I connect the fans of the old version of Lianli with the modern version in a consistent manner and with a uniform application?
@mainsource8030
28 күн бұрын
use whatever fan you want buddy, as long as its 120 or 140mm,, you can use a pc fan from 2002
@Stigness23
9 ай бұрын
Do you prefer the XL or the new RGB?
@Khalid-hv8sk
8 ай бұрын
I can’t seem to close the side glass panel on this case, anyone else having that issue?
Пікірлер: 180